dentalben Posted December 14, 2012 Share Posted December 14, 2012 I'm currently on 2.2.4 and when trying to run the 2.3 update, I get the following message:Connections are still being established - Re-identify the controller running director and restart the update.See the attached screen shot image.My primary controller is an 800; I recently added an old 200 to my project for an audio connection, but had to do a factory reset to remove it from an old mesh. It's identified and connected, but since it's on old software (2.0.2), I think that's the issue. I could remove it from the project and run the 2.3 update, but that wouldn't fix the old controller issue. In the connections tab, I've re-identified the 800 controller (without disconnecting it, as that would not be good), and I still get the message when trying the update.Any suggestions on how to work through this? Thanks Link to comment Share on other sites More sharing options...
thecodeman Posted December 15, 2012 Share Posted December 15, 2012 Reboot the 800? Link to comment Share on other sites More sharing options...
Cyknight Posted December 15, 2012 Share Posted December 15, 2012 Reboot the main controller, plus that 200. This usually clears this. (This is actually fixed in 2.3, but you need to be on it before it's fixed )As a side note, unidentifying the main controller isn't an issue at all (deleting it if it's the ZAP might be an issue on occasion). Link to comment Share on other sites More sharing options...
dentalben Posted December 18, 2012 Author Share Posted December 18, 2012 Rebooting both controllers fixed the problem and the update to 2.3 went smoothly. I've always wished for a soft reboot function from within Composer. It seems a bit archaic to have to pull the power plug... Link to comment Share on other sites More sharing options...
Godzilla Posted December 19, 2012 Share Posted December 19, 2012 EV has a ping driver that can reboot your controllers........and is pretty cheap.............you can program a button or whatever you want to reboot the controller Link to comment Share on other sites More sharing options...
wappinghigh Posted December 19, 2012 Share Posted December 19, 2012 EV has a ping driver that can reboot your controllers........and is pretty cheap.............you can program a button or whatever you want to reboot the controllerCan you program this using HE? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.