pstuart Posted December 7, 2013 Share Posted December 7, 2013 Grrr.... Rebooted everything, but streaming audio, tune-in and annoucements stopped working and everything seems correct. Anyone have any thoughts? I am at my wits end trying to figure out why nothing digital is streaming from any of my controllers. Everything else is working just fine, IR control, IP drivers, etc. Just no digital audio from any controllers. Set up is HC 1000, HC 250 as Zigbee Server, HC 300 and HC 200 are also wired up. recievers and a c4 8 zone amp for all audio. Link to comment Share on other sites More sharing options...
SMHarman Posted December 7, 2013 Share Posted December 7, 2013 Your network blocking anything? Sent from my LT26i using Tapatalk Link to comment Share on other sites More sharing options...
pstuart Posted December 7, 2013 Author Share Posted December 7, 2013 Shouldn't be, everything was working a few days ago. Link to comment Share on other sites More sharing options...
Godzilla Posted December 7, 2013 Share Posted December 7, 2013 have u lost any of your connections to your digital media, from tune-in or controllers Link to comment Share on other sites More sharing options...
pstuart Posted December 7, 2013 Author Share Posted December 7, 2013 Nope those all appear to be fine. Link to comment Share on other sites More sharing options...
Godzilla Posted December 7, 2013 Share Posted December 7, 2013 try an update to 2.5.2sometimes a simple update sets things right cant hurt anyway Link to comment Share on other sites More sharing options...
kajphotos Posted December 7, 2013 Share Posted December 7, 2013 Do you have time warner ? Link to comment Share on other sites More sharing options...
pstuart Posted December 7, 2013 Author Share Posted December 7, 2013 no, comcast. Will try the update to 2.5.2 overnight. Link to comment Share on other sites More sharing options...
demos@nuru.co.za Posted December 7, 2013 Share Posted December 7, 2013 Which controller's audio out are you using for streaming? Break that connection in composer, reboot controller, and redo audio connection to the amp. In system design, double click on c4 amp and make sure 'inputs locked' is not selected. zigbee server runs faster on HC1000.... Link to comment Share on other sites More sharing options...
pstuart Posted December 7, 2013 Author Share Posted December 7, 2013 Upgrading to 2.5.2 revealed that the 1000 could not see the internet. Fixed that and then did the upgrade. Wierd that a 1000 that can't access the internet would stop announcements, I think audioclient is doing more than just playing network audio. Putting a trace on the traffic and seeing what "checking" in its doing to stop announcements from playing. I think announcements should play regardless of internet connectivity. Now all digital audio is working. Wierd... Link to comment Share on other sites More sharing options...
RyanE Posted December 8, 2013 Share Posted December 8, 2013 I don't believe audioclient does *anything* on the HC1000, since there's no audio output on the HC1000. I'd guess it probably shouldn't even be running. RyanE Link to comment Share on other sites More sharing options...
Cyknight Posted December 8, 2013 Share Posted December 8, 2013 Not being able to connect CAN throw of time-synch however, which in turn can affect lots of things... Link to comment Share on other sites More sharing options...
pstuart Posted December 8, 2013 Author Share Posted December 8, 2013 Hmm Ryan u r right. Was logged in To my 250 when I saw that. Go figure. I think upgrading fixed it Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.