R_Willis Posted September 2, 2018 Share Posted September 2, 2018 I presume the old Cumulus weather driver will not work with the newer touchscreens and controllers? Thanks. Link to comment Share on other sites More sharing options...
R_Willis Posted September 7, 2018 Author Share Posted September 7, 2018 Any work around on this? This Cumulus driver/app by ExtraVeg was pretty cool. Link to comment Share on other sites More sharing options...
BraydonH Posted September 7, 2018 Share Posted September 7, 2018 Weather is basically built into the T3 touchscreens. There is also the Weather Underground Driver (Wunderground) for programming. Link to comment Share on other sites More sharing options...
R_Willis Posted September 7, 2018 Author Share Posted September 7, 2018 I realize that, but have $500 invested in my backyard Davis Vantage Pro2 also. Link to comment Share on other sites More sharing options...
BraydonH Posted September 7, 2018 Share Posted September 7, 2018 I am not familiar with that but if you were using a 4store app to interact with it than you can gaurantee it is no longer supported. Depending on the driver you might be able to bind the Temperature and Humidity to the generic temp/humidity drivers in the database and you would atleast get something. But there is no way that I know of to say something like "Wind is traveling at 13 km/hr north by northwest" or whatever your after there. If you invested $500 to the davis piece it looks like it comes with a portable touchscreen so your likely stuck using that. Link to comment Share on other sites More sharing options...
bdo21 Posted September 7, 2018 Share Posted September 7, 2018 Presumably the Control4 WeatherHawk driver still works? I am planning to buy a WeatherHawk weather station and while the primary purpose is triggering actions on rain and wind, the touchscreen display would be nice. Link to comment Share on other sites More sharing options...
Trey Posted September 22, 2018 Share Posted September 22, 2018 I just upgraded from 2.9.1 to 2.10.4 and the Cumulus app on the flash touchscreens no longer works :-( I have been using Cumulus & a Davis Pro2 with my Control4 system since 2012... Link to comment Share on other sites More sharing options...
R_Willis Posted September 22, 2018 Author Share Posted September 22, 2018 trey: yep, 4store apps won't work with the newer controllers and touchscreens. Probably have to consider the weather underground driver. Link to comment Share on other sites More sharing options...
Trey Posted November 18, 2018 Share Posted November 18, 2018 Finally got the Weather Underground driver working, man was it tough tracking down an API key... Link to comment Share on other sites More sharing options...
R_Willis Posted November 18, 2018 Author Share Posted November 18, 2018 3 hours ago, Trey said: Finally got the Weather Underground driver working, man was it tough tracking down an API key... .....and rumor is come 1.1.19 it will no longer work... Link to comment Share on other sites More sharing options...
dw886 Posted November 19, 2018 Share Posted November 19, 2018 I replied on the main thread about the WU keys, but it looks like if your key is tied to an account that is uploading data from a PWS to WU, they're still going to allow the key to pull data (there's limits as to how many calls you can make per hour, etc). So it sounds like this will continue to work for some, including the OP, as long as the API key and the PWS uploading are on the same WU account... Link to comment Share on other sites More sharing options...
R_Willis Posted November 19, 2018 Author Share Posted November 19, 2018 My Davis Vantage Pro2 is uploading to WU, so lets hope it continues to work for me. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.