Dinushan Paranavithana Posted May 19, 2019 Share Posted May 19, 2019 Is it possible to connect the 'Zone 2 Pre out' of Denon AVR to Triad Power amplifier? Link to comment Share on other sites More sharing options...
sonic30101 Posted May 19, 2019 Share Posted May 19, 2019 As long as the avr will downmix hdmi to zone2 analog it would work. Typically c4 is not the best solution for boardrooms and conference rooms but if they are simple enough you can get by Link to comment Share on other sites More sharing options...
Dinushan Paranavithana Posted May 19, 2019 Author Share Posted May 19, 2019 Okay. But I cannot get the audio to work. Link to comment Share on other sites More sharing options...
Brownbatsbreath Posted May 19, 2019 Share Posted May 19, 2019 You need to take a closer look at your AVR. As stated above, I would bet your AVR isn’t capable of sending an analog out signal when you’re only using an hdmi input. Link to comment Share on other sites More sharing options...
Costa Posted May 20, 2019 Share Posted May 20, 2019 It will work but it is lack of PRE OUT signal level to get it work properly. Right now we have an issue to get TV sound stream to the TRIAD ONE via E-3 audio in. If we connect CD player`s audio out to the EA-3 audio in, it streams perfectly to any TRIAD in the house with perfect quality and volume level. Then we try to do the same but use AVR (ARCAM, ONKYO and MARANTZ) PRE OUT in the same way. There are little differences with volume level between them but still too low to use. Tried ZONE2, ZONE3 - nothing, sensitivity of EA-3 input set to 12 but need to set volume to 90+ on triad to heard something, and if someone forgot to down the volume or something goes wrong with programming it will damage some ears with high volume in a tiny bathroom, when tunein starts to play. Link to comment Share on other sites More sharing options...
LollerAgent Posted May 20, 2019 Share Posted May 20, 2019 I'm having the same issue. I have a local 5.1 zone (Denon AVRX4300H) with a turntable. I'm trying to connect the ZONE3 pre-outs on the AVR into an input on my Triad AMS24 so I can listen to the turntable over my WHA matrix.. but the levels are super low. Is there any viable solution for this? Link to comment Share on other sites More sharing options...
LollerAgent Posted May 20, 2019 Share Posted May 20, 2019 Welp - I didn't realize the AVR had a discrete volume control for ZONE3, so I cranked that up, and the results are much better now, but still lower than I would like. Link to comment Share on other sites More sharing options...
sonic30101 Posted May 21, 2019 Share Posted May 21, 2019 On 5/20/2019 at 5:36 PM, LollerAgent said: Welp - I didn't realize the AVR had a discrete volume control for ZONE3, so I cranked that up, and the results are much better now, but still lower than I would like. Set it in the menu as fixed instead of variable of the avr Link to comment Share on other sites More sharing options...
knowitall Posted May 22, 2019 Share Posted May 22, 2019 If only the manufacturer supplied a document with the device purchased that explained how it worked. Link to comment Share on other sites More sharing options...
Dinushan Paranavithana Posted May 22, 2019 Author Share Posted May 22, 2019 On 5/21/2019 at 2:56 AM, LollerAgent said: I'm having the same issue. I have a local 5.1 zone (Denon AVRX4300H) with a turntable. I'm trying to connect the ZONE3 pre-outs on the AVR into an input on my Triad AMS24 so I can listen to the turntable over my WHA matrix.. but the levels are super low. Is there any viable solution for this? Hi @LollerAgent Could you please share a screen shot of the connections that you have made in composer pro project. I need to try the same. Thank You! Link to comment Share on other sites More sharing options...
LollerAgent Posted May 22, 2019 Share Posted May 22, 2019 1 hour ago, Dinushan Paranavithana said: Hi @LollerAgent Could you please share a screen shot of the connections that you have made in composer pro project. I need to try the same. Thank You! Sorry - but I only have access to HE. My dealer setup the bindings/connections. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.