dbuono Posted August 6, 2019 Share Posted August 6, 2019 In our new build, we have a very large linear burner setup (18' of burning in modern steel fireplace). The burners were sourced from China and utilize a Roku type remote. Since no line of site is required for use, I am assuming that this operates on RF signal. Is there a way to build a custom driver, add some type of RF transmitter and then get this to operate through C4? Any suggestions or help would be appreciated. Thanks Quote Link to comment Share on other sites More sharing options...
Amr Posted August 7, 2019 Share Posted August 7, 2019 Use Matterlink MultiX device. Quote Link to comment Share on other sites More sharing options...
Matt Lowe Posted August 28, 2019 Share Posted August 28, 2019 On 8/6/2019 at 1:14 PM, dbuono said: In our new build, we have a very large linear burner setup (18' of burning in modern steel fireplace). The burners were sourced from China and utilize a Roku type remote. Since no line of site is required for use, I am assuming that this operates on RF signal. Is there a way to build a custom driver, add some type of RF transmitter and then get this to operate through C4? Any suggestions or help would be appreciated. Thanks there is likely still a low voltage relay system in use. A c4-z2io and some wiring and you can have best of both worlds c4 integration and their little remote. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.