C4Newbie Posted September 24, 2009 Share Posted September 24, 2009 I know there are some new receivers with C4 drivers out. What's best for Sirius, internet radio, video, 2 channels, and shockingly FM radio two way support? So I listen to a lot of FM radio and would like to be able to change and see what stations are playing from my 7" panels.Thanks, Link to comment Share on other sites More sharing options...
C4Newbie Posted September 25, 2009 Author Share Posted September 25, 2009 Anybody have any suggestions? Link to comment Share on other sites More sharing options...
thecodeman Posted September 25, 2009 Share Posted September 25, 2009 I dont think any support FM radio two-way at this time. You'll want the C4 multi-tuner for that.We use Denons, Onkyo, Pioneer, etc but most all have decent control these days. Link to comment Share on other sites More sharing options...
C4Newbie Posted November 21, 2009 Author Share Posted November 21, 2009 Doesn't ANYONE use FM radio anymore and want the ability to control it through C4? Is the C4 tuner my only option? Link to comment Share on other sites More sharing options...
jberger Posted November 21, 2009 Share Posted November 21, 2009 You can do it today via the 1 way drivers, which are fine for most applications. Most people just use presets and tuner up/down commands so there is little need for a 2-way driver on FM. Link to comment Share on other sites More sharing options...
mtech Posted November 22, 2009 Share Posted November 22, 2009 so the c4 tuner is not really necessary , you can use the onkyo, or denon and still have whole house audio but then i guess each room would have to listen to one station but the c4 would allow you to play a different station in another ? Link to comment Share on other sites More sharing options...
ILoveC4 Posted November 22, 2009 Share Posted November 22, 2009 The Control4 tuner has two tuners, so it can play two different stations at once. For more than two simultaneous stations you would need multiple tuners. Link to comment Share on other sites More sharing options...
henniae Posted November 22, 2009 Share Posted November 22, 2009 so the c4 tuner is not really necessary , you can use the onkyo, or denon and still have whole house audio but then i guess each room would have to listen to one station but the c4 would allow you to play a different station in another ?The C4 Multi-tuner has 2 audio outs so you could play 2 different AM or FM stations at the same time. It also has an XM option. Link to comment Share on other sites More sharing options...
C4Newbie Posted January 19, 2010 Author Share Posted January 19, 2010 Do any of the C4 certified Denon, Sony, or NAD receivers now provide 2 way FM control? How about internet radio control? Would be nice to see and control FM stations (not just presets) and Internet radio stations from a C4 touch panel. Link to comment Share on other sites More sharing options...
Sbutter Posted January 19, 2010 Share Posted January 19, 2010 There should be a two-way driver for the Parasound FM/AM ZTuner.http://www.parasound.com/ParasoundZ/ztunerv2.phpI think there is an option for internet radio in the XBMC driver. You can also access Apple TV Internet radio stations through itunes playlists with the new two-way driver. All from C4 touchscreens. Link to comment Share on other sites More sharing options...
RyanE Posted January 19, 2010 Share Posted January 19, 2010 Yes, there is a 2-way serial driver for the zTuner.That's what I use at my home.RyanE Link to comment Share on other sites More sharing options...
C4Newbie Posted January 19, 2010 Author Share Posted January 19, 2010 Yes, there is a 2-way serial driver for the zTuner.That's what I use at my home.RyanEWhat's the benefit of this tuner over the C4 tuner? Also, what is the XBMC driver? Ryan, do you know if the Sony STR-DA5500ES with Control4 support should have this 2 way tuner functionality? http://www.digitaltechnews.com/news/2009/09/sony-strda5500es-and-strda3500es-av-receivers-.html Link to comment Share on other sites More sharing options...
RyanE Posted January 19, 2010 Share Posted January 19, 2010 I don't know for certain if the Sony receiver will support the tuner functionality, but I would be surprised if it didn't.I use the zTuner because when I got it, the v.1 tuner from Control4 was the available tuner, and it didn't work too well at my house (I'm behind some mountains, I needed a really strong tuner, and the zTuner worked great).The current rev of the C4 tuner works much better, but I haven't switched back yet.Besides, I work a lot with 3rd parties, so I like to have 3rd-party gear running my house. I also use Aprilaire thermostats, not the C4 ones. Already had them, they work fine.RyanE Link to comment Share on other sites More sharing options...
C4Newbie Posted January 20, 2010 Author Share Posted January 20, 2010 I don't know for certain if the Sony receiver will support the tuner functionality, but I would be surprised if it didn't.I use the zTuner because when I got it, the v.1 tuner from Control4 was the available tuner, and it didn't work too well at my house (I'm behind some mountains, I needed a really strong tuner, and the zTuner worked great).The current rev of the C4 tuner works much better, but I haven't switched back yet.Besides, I work a lot with 3rd parties, so I like to have 3rd-party gear running my house. I also use Aprilaire thermostats, not the C4 ones. Already had them, they work fine.RyanESo what about these "certified" receivers from Denon, etc? If they are being certified, what is the process for that? Wouldn't they support two way FM control as well as many of the other Receivers features? I just want to pick the best receiver that will support 3+ zones, two way FM control, obviously A/V, and hopefully Internet Radio.http://c4central.com/2010/01/06/more-information-on-control4-certified-devices-from-ces-control4-iq-explained/ Link to comment Share on other sites More sharing options...
dogdvr Posted January 21, 2010 Share Posted January 21, 2010 I don't want to be DebbiDowner. But we have not seen what the new "certification" process does. Just because they announce something at a trade show does not mean dealers have seen it in action.Sometimes we have the correct info 20 minutes before your do.I am not complaining but I am trying to explain Link to comment Share on other sites More sharing options...
urbanmark Posted January 22, 2010 Share Posted January 22, 2010 So what about these "certified" receivers from Denon, etc? If they are being certified, what is the process for that? Wouldn't they support two way FM control as well as many of the other Receivers features? I just want to pick the best receiver that will support 3+ zones, two way FM control, obviously A/V, and hopefully Internet Radio.http://c4central.com/2010/01/06/more-information-on-control4-certified-devices-from-ces-control4-iq-explained/I have one of the new Denon AVR-xx10CI series receivers... and I really like it. There are new C4 IR drivers for the xx10 series, but not serial. My system is set-up with an older C4 Denon serial driver, which works fine for the majority of regularly used functions, but only OK for the more advanced features. I am able to access FM channels from the remote and Navigator, but have no touch screens in my system. I've mentioned this in other posts, but was disappointed to find the multizone features do not work well (despite C4 highlighting the mutlizone capabilities of Denon receivers in their press releases). I think this is more of an issue related to having the latest C4 drivers, rather than a problem with the Denon. And if you poke around the forum a little bit, you'll find some ongoing debate on using multizone receivers at all (regardless of manufacturer). And you'll also find debate about C4 drivers.Happy to answer any other questions about the Denon receiver. Link to comment Share on other sites More sharing options...
thecodeman Posted January 22, 2010 Share Posted January 22, 2010 I don't want to be DebbiDowner. But we have not seen what the new "certification" process does. Just because they announce something at a trade show does not mean dealers have seen it in action.Sometimes we have the correct info 20 minutes before your do.I am not complaining but I am trying to explain+1. Link to comment Share on other sites More sharing options...
new-user-ideas Posted January 22, 2010 Share Posted January 22, 2010 Do the new Integra receivers include the C4 drivers? Where would one get a list of products that comewith C4 drivers? Thanks in advance. Setting up a new home theater and any ideas are appreciated. Link to comment Share on other sites More sharing options...
thecodeman Posted January 22, 2010 Share Posted January 22, 2010 Do the new Integra receivers include the C4 drivers? Where would one get a list of products that comewith C4 drivers? Thanks in advance. Setting up a new home theater and any ideas are appreciated.There's no list. The driver is either created by Control4 or your dealer. See this thread for additonal information.http://c4forums.com/viewtopic.php?id=4660 Link to comment Share on other sites More sharing options...
C4Newbie Posted January 22, 2010 Author Share Posted January 22, 2010 So are there any receivers that have well written drivers where the zones work well along with two way FM control? Do even the C4 Amp / Tuner do this well? Link to comment Share on other sites More sharing options...
thecodeman Posted January 22, 2010 Share Posted January 22, 2010 IMO, Receivers should be used in single zones where 5/6/7 channels of surround sound are needed. For distributed audio, the Control4 multichannel amps are available in increments of 4 or 8 zones (two speakers in a zone). For single zones of audio only less than 4, use an ethernet speakerpoint. For distributing AM/FM/XM, the Control4 tuner does this very well. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.