fleon Posted July 16, 2021 Share Posted July 16, 2021 I think I asked about this several months ago when the Lutron wood blinds were new, and no one knew much about them. Has anyone had any luck getting them to work correctly? I have the standard roller blinds, and they work fine- they open, close, and can be set to a %. The wood blinds (they only tilt open and close, no up/down) can be detected, but telling them to "open" just has them rotate up or down one step on the motor. It sounds like either a driver issue or a config issue. Anyone had any experience with these and gotten them to work? These are the ones Lutron release about a year ago. Quote Link to comment Share on other sites More sharing options...
lippavisual Posted July 16, 2021 Share Posted July 16, 2021 How are you controlling the wood blinds? what bridge? Quote Link to comment Share on other sites More sharing options...
fleon Posted July 17, 2021 Author Share Posted July 17, 2021 The lutron hub. Small white square. Not sure which model, honestly. All my roller blinds are working properly through it with C4, however. Quote Link to comment Share on other sites More sharing options...
fleon Posted August 14, 2021 Author Share Posted August 14, 2021 So no one ever really responded on this. It's the Lutron Serena wood blind series. Anyone got this working? *bump* Quote Link to comment Share on other sites More sharing options...
net_tech Posted August 15, 2021 Share Posted August 15, 2021 are Lutron Serena wood blinds battery powered or plugged in ? I am not seeing anything about RA2 or QS system mentioned in the documentation. Quote Link to comment Share on other sites More sharing options...
tekki70 Posted August 16, 2021 Share Posted August 16, 2021 sounds like the incorrect driver or setup as a roller shade. which driver are you using for the bridge, and the shade itself? Quote Link to comment Share on other sites More sharing options...
fleon Posted August 30, 2021 Author Share Posted August 30, 2021 1) Battery powered. 2) Lutron Caseta Smart Bridge Pro, Driver Set Version: [v1.0 rev20140515] - hub Lutron Caseta Serena Shade - Driver Set Version: [v1.0 rev20140515] The hub driver I think is ok, since it controls the roller blinds I have just fine. The shade driver has a few options, such as Blind type, Blind Movement, and View/Modify Level Binding. I've tried a few of those options and havne't found one that works. Quote Link to comment Share on other sites More sharing options...
fleon Posted December 5, 2021 Author Share Posted December 5, 2021 Going to bump this up in case anyone has heard of a fix or think they can figure it out. Quote Link to comment Share on other sites More sharing options...
fleon Posted May 2, 2022 Author Share Posted May 2, 2022 In case anyone is curious or has this problem, the Lutron LEAP driver does work with these new blinds. Sad - this is the only time I've received a fairly intentionally unhelpful message "I could help you, but I won't". (paraphrased.) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.