lostndashuffle Posted April 21, 2023 Share Posted April 21, 2023 Every Samsung on this site reacts very similar. Sometimes they will bootup on scene start immediately, sometimes they have 10+ power retries. Sometimes when powering off they go right off, other times, they will act like they power off with the screen showing so, then tv will turn back on, have to start a scene and power off a scene to turn off after that. All this will happen even if giving a tv 45+ seconds after powering off. Or even 5 minutes. Attached is one of the rooms tv settings, and its Lua output. Also, why is it sending input commands when it has no confirmation of powering on? How can I get the tv to respond better on ip commands? Tv is static ip, in network it is also static without Mac address. Have tried with both, have tried with one of each. Tvs are all 2022 samsung frames, ranging from 43"-85" Quote Link to comment Share on other sites More sharing options...
msgreenf Posted April 21, 2023 Share Posted April 21, 2023 Use static IPs over sddp Quote Link to comment Share on other sites More sharing options...
lostndashuffle Posted April 21, 2023 Author Share Posted April 21, 2023 2 minutes ago, msgreenf said: Use static IPs over sddp It is. (Stated near end of description) Quote Link to comment Share on other sites More sharing options...
mujtaba.khokhar Posted April 21, 2023 Share Posted April 21, 2023 Have you tried a software update on the TVs? Quote Link to comment Share on other sites More sharing options...
msgreenf Posted April 21, 2023 Share Posted April 21, 2023 There are some known issues w art mode and Samsung's Quote Link to comment Share on other sites More sharing options...
lostndashuffle Posted April 21, 2023 Author Share Posted April 21, 2023 20 minutes ago, mujtaba.khokhar said: Have you tried a software update on the TVs? Samsung are up to date Quote Link to comment Share on other sites More sharing options...
lostndashuffle Posted April 21, 2023 Author Share Posted April 21, 2023 16 minutes ago, msgreenf said: There are some known issues w art mode and Samsung's In these situations art mode is not being utilized for the issues to arise. Quote Link to comment Share on other sites More sharing options...
Cyknight Posted April 22, 2023 Share Posted April 22, 2023 5 hours ago, lostndashuffle said: Tv is static ip, in network it is also static without Mac address Just to be sure: Are they wired Are they identified by simply entering the IP addresses. No more no less Are the MACs in the drivers, and are they the correct ones (ie the the proper wired MAC not the WiFi MAC Are they paired properly. Quote Link to comment Share on other sites More sharing options...
lostndashuffle Posted April 22, 2023 Author Share Posted April 22, 2023 8 minutes ago, Cyknight said: Just to be sure: Are they wired Are they identified by simply entering the IP addresses. No more no less Are the MACs in the drivers, and are they the correct ones (ie the the proper wired MAC not the WiFi MAC Are they paired properly. They are wired, wifi is not connected. Static at tv and reserved in router, no conflict with another ip address. In the network tab they are set via ip not sddp, before removing ssdp mac I verified ip address was correct. They are paired properly Quote Link to comment Share on other sites More sharing options...
Cyknight Posted April 24, 2023 Share Posted April 24, 2023 On 4/21/2023 at 9:34 PM, lostndashuffle said: ssdp mac sddp is not MAC - in the driver properties there should be a line that displays the MAC address however. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.