Jbbrenner90
-
Posts
58 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Events
Posts posted by Jbbrenner90
-
-
How to control Google-Based TCL tv. There is no IP control and was told IR blasters would not be reliable as there is no input button or discreet codes... Anyone done it?
-
-
15 hours ago, Matt Lowe said:
I just lol
What’s so funny?
-
hey hey sorry everyone for the delay here is the video of the place. @dreres @Cyknight @Andrew luecke @Matt Lowe @lippavisual
These are pella doors so they slide on outside which is backwards from most sliders. There are six sliding doors. Looking for minimalistic and clean as possible. -
-
We have a pool house with 6 single glass sliding doors. WIres were run and drilled through the top jam of the door on the inside for electro-magnetic locks but now we are having issues finding the proper way to do it. Has anyone put electromagnetic locks or some type of lock control on sliding glass doors. Our entire house is keyless so the thought of having to get keys to get in and out of our pool house is very annoying.
-
Yeh i realized that pretty quickly. Next i will dial them back to 40mhz if it continues.
-
yeh that was me trying to get more speed :D. I have since then backed it down to 80mhz. Our house is 3700 sqft total with 1000sqft garage as well. We have one in garage, 3 Upstairs 1900 sqft and 3 downstairs 1800sqft. Then we have 2 outside in backyard. Most are turned to low and some custom DBM 10 for example.
-
2 minutes ago, Amr said:
Check if IGMP Snooping is on and turn it off!
it's off
-
3 hours ago, Jbbrenner90 said:
using RSTP at the control level. I have priroties set on switches with RTSP is that what you mean?
3 hours ago, Andrew luecke said:Do port overrides for the ports going to the controllers, panelised lighting modules, touchscreens, and intercom (any C4 branded equipment). turn off STP on those ports and totally reboot network. Try that (its almost certainly the case if you're using STP instead of RSTP)..
i think you mean this @Andrew lueckeon the ports themselves here? Does this matter if you use RSTP in the global settings?
-
10 minutes ago, Andrew luecke said:
Do port overrides for the ports going to the controllers, panelised lighting modules, touchscreens, and intercom (any C4 branded equipment). turn off STP on those ports and totally reboot network. Try that (its almost certainly the case if you're using STP instead of RSTP)..
using RSTP at the control level. I have priroties set on switches with RTSP is that what you mean?
-
I been having issues that nobody seems to be able to fix and I am defeated and just ready to give up.... Everything is documented here and I would be forever grateful if someone can help. I am out of ideas and just can't believe this is the way it is.... This has caused such havoc for my family as we constanlty have no lights and has been going on for months and I am ready to rip everything out.... https://community.ui.com/questions/UNIFI-6-PRO-Problems-Feeling-defeated/621db376-d54c-465a-8856-9e3b8f88d801 Hoping someone here can help.
-
1 hour ago, Matt Lowe said:
I beleive all of these locks would be european style locks and then you would need to purchase zigbee pro cards for them.
not sure i follow. Imagine a glass sliding door with a thumblock.
-
Building a pool house and we have 7 glass sliding doors. We are looking for a way to remotely control the locks so i don't have to use a key to get in as thats obviously annoying. Anyone does this anyway?
-
Kids dropped and broke screen. Still works. See picture. Dealer says have to buy a whole new one but I doubt that
-
Our 2 year old dropped our 7" table top C4 screen and cracked it pretty bad. Is there a way to just replace the LCD screen or do we need to buy a new remote. Dealer has no replacements to even order and can't get them if we need to buy a new one.
Thank you.
-
Where is that?
-
Recently swapped all my araknis gear for ubiqiuti. Looking to get rid of:
AN-110-SW-R-24 x2
AN-110-SW-R-16- POE
AN-110-SW-R-8- POE
AN-310-RT-4l2W
3 Access Points
HiKivision NVR
15-Lumin and Hikvison Dome Cameras
Everything works perfectly EXCEPT
one camera the nightvision is finnicky and another one the wire needs to be rewired as it was cut. Everything else is good to go. I do not want to mess around with this stuff and just want to get rid of it otherwise it will set. Would like $1,000 plus shipping. I know that is cheap but again i just want it gone.
-
4 hours ago, dcovach said:
Are you talking about the chowmain driver on drivercentral.io? I can set you up with that. Comes with a trial before you decide to buy.
yes. We have that already and it works for the HAIKU fan but not working for the I6 fans. I am curious if there is anyway to integrate those ones.
-
Looking to integrate 3 big ass fans model i6. We are using a driver foR our haiku app but it doesn’t work for these.
-
Hey Guys,
Having an issue with Apple TV control Currently we can control apple tv's via wif no problem but as soon as i plug ethernet and its hardwired into swtich we lose remote control. Any ideas?
-
3 minutes ago, chopedogg88 said:
I'm fluent in both Araknis and Ubiquiti as those are the two that I use in my systems.
sending you DM
-
I am looking for a dealer fluent in ubiquity for any issues during a swap out of equipment and future support. I currently am running Araknis router with 3 access points, 4 switches, full panelized lighting, touch screens, audio zone control ETC, 16 hikivision cameras. I am replacing everything with ubiqutiy equipment. UDM pro, 2 48 pro poe switches and 15 g4 pro cameras and 3 access points. Please send reccomendations!
Thank you.
-
I had another networking guy look at it and he said this router is the biggest piece of crap ever. My cpu on it runs at 80 pct.
Control TCL Google Based TV
in General Control4 Discussion
Posted
we tried that first one the issue was our remote does not have an input button on this TCL remote.....