coredyn

12 hours ago, indecision said:

Anyone else seeing the HS220 dimmer switches show on the lighting page as always being turned on?  The slider stays at whatever level they are programmed to turn on to and the on/off bulb indicator the right of the slider stays lit (when turned off).

Definitely one of my favorite drivers...thanks Alan for all the work y'all have put into this one!

I have noticed some oddities with my HS220's. I haven't had a moment to pull logs etc. Its odd as they control and connect properly but they always show as on. Will try and pull logs over the next few days and submit a ticket if needed. 

7 hours ago, joecheech said:

Anybody know how to disable the LED on / off indicator on the HS103?  It's great to have my white noise machine integrated but when it turns on the blue LED is way too bright!

There is an iPhone app (not sure if they have an android version) called Watt. You can enable night mode and it will turn off the white ring all the time. Works quite well, although from what i recall you can only connect to a few devices before you need to purchase a license. For me I only needed to modify 2 lights so it worked perfectly, havent touched it since I configured the two switches. 

That's awesome news. I wondered if it was messages too long, I removed my longer notifications to test. The service has been bulletproof otherwise. Thanks for the update Alan.

I had a couple issues over the last week. I was able to get it working again by re authenticating my pushover credentials. When i had issues i watched logs and noted that my pushover messages were sending something like the last 20+ messages all at once and everytime it was triggered it would mass send again causing the IFTTT Maker driver to not trigger properly. I had to reauthenticate twice and its been a few days now with no issues. 

Not sure if that helps. 

Correct.

I also found out in the middle of the night that for some reason right now when I open the app on my iPhone it instantly turns on some lights just from opening the app.

But it’s not working now, correct? But it did work on iOS 3 prior? Just trying to understand if our situation is the same.


Sent from my iPhone using Tapatalk

Correct.

I am on OS3 and toggle or the select method used to work on my remotes, t3, iOS and Android.

Has anyone else had success with the new iOS c4 app connecting outside of the same wifi connection using a vpn? Since I updated I can no longer connect remotely...

 

I have my VPN setup using openvpn.

Still looking for testers? I have 3 nexia enabled thermostats in my system, would love to get them into C4.

With the HS220 being added is there a way to bind it to something that will enable dimming through C4? So far i have only been able to add it as an outlet light which provides on/off but no dimming? Any thoughts or suggestions? 

 

Disregard--- Found the new driver, i was trying to add the HSXXX

Thats exciting to hear development on the hs220. I tried getting it to work with the existing driver but it wasn't very stable and ended up returning them. I would love to be able to add some of these! 

I thought I would share my recent addition to my system. I have a Kohler DTV+ shower that has a network interface as well as a web portal for minor changes and has some control over the device. 

I decided to peek around and inspect some of the web elements to discover a repeatable URL that I can use to trigger shower start and stop. You can discover these by simply using 'Inspect' in chrome for example and log the devices activty as you activate/deactivate the shower for example. 

Below are the two commands I am currently using in my system, you can modify the valve outputs and temperature. Mine right now is set only to turn on valve 1 at 38C.  Right now I use these links as an image in announcements (to trigger the weblink as an image on my T3), I then have it linked to custom buttons on my bathroom screen as well as IFTTT/google assistant (OK Google, turn on the shower)  . I do not have the Chowmain driver to push weblinks but I think I will update to use that to trigger the URL in the future. 

ON: http://IPADDRESS/quick_shower.cgi?valve_num=1&valve1_outlet=1&valve1_massage=0&valve1_temp=38&valve2_outlet=0&valve2_massage=0&valve2_temp=38&_=1529517501631 
OFF: http://IPADDRESS/stop_shower.cgi?_=1529517501635 

It is not flawless, and I would caution when trying to discover the correct links if you enter one incorrectly the Kohler web portal will become non-responsive and you need to power cycle it (this took many power cycles for me to figure out correctly). 

Nonetheless, I can now tell my shower to turn on an off which I was quite excited about.   

3 minutes ago, Cyknight said:

That connection is a sensor INPUT - allowing the NVR to use an external sensor to trigger alarm recording (ie if security system is in alarm, trigger recording or higher quality recording) - not to allow the NVR to TRIGGER an alarm

The NVR I have has 4 inputs and 1 output. I can set triggers on the NVR  to activate alarm out under certain conditions. I can confirm when the alarm out is triggered it goes from normally open to closed. 

Thanks Sonic, I have the contact setup and I wasn't sure if a 12v source would be needed. Ill have to give that a go.

I have a Hikvision NVR system that I am trying to utilize the alarm out contacts into a controllers contacts. The NVR has one pair of outputs which I have confirmed are ground and normally open (NO). I have tried connecting to the controller on the contacts 12+ & SIG but it is unable to trip the sensor. Any thoughts on how I can acomplish this? 

My goal here is to be able to when line crossed or motion on security cameras is triggered I want an output from NVR into C4 so that I can have an announcement (already configured) and have any TV that is on display NVR (also configured but need the trigger). Currently I am using an IFTTT trigger to accomplish everything but it has about an 8-10+ sec delay which I would like to reduce if possible. 

Any help would be greatly appreciated