-
Posts
224 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Events
Everything posted by Dinushan Paranavithana
-
I'm trying to create an IR Driver for a Samsung TV. However, the remotes power toggle button is the only command that will be read by the controller. When i press the other buttons, the controller is not accepting the IR commands sent by the remote. Remote buttons are fine as it works directly with the TV. I have also attached an image of the remote. What should be done in order to assign the IR commands of other buttons of the remote to the controller? https://www.dropbox.com/s/1o7o7p3b06tkvvm/Photo 7-18-19%2C 3 52 13 PM.jpg?dl=0
- 2 replies
-
- createdriver
- ir
- (and 3 more)
-
Yes I tried it @Crustyloafer. Thanks, but i wanted to try it for another purpose. I found the issue. I have deleted the power command from the tv template driver (Driver Wizard) when i created a custom driver for the TV. I have added my own command called 'power' later to assign the on/off toggle IR code value. It's good if control4 can allow us to create a GUI menu for the driver that we create, where we can add our own commands and assign them to our own buttons we design in our GUI.
- 9 replies
-
- change
- variablestate
-
(and 5 more)
Tagged with:
-
The current order of the drapes list on the menu is given below. Front Drape Inner, Front Drape Outer, TV Drape Outer, TV Drape Inner Image Link: https://www.dropbox.com/s/ntkggz9vajvmm5u/Photo 5-30-19%2C 3 51 48 PM.jpg?dl=0 How can i change the order in this way: Front Drape Inner, Front Drape Outer, TV Drape Inner, TV Drape Outer
-
I want to toggle the device state. If the 'TV' is selected, we can see the menu given below. So I want the TV to turn off/on using the 'Power' button. In order to achieve this, i'm trying to toggle the variables state when ever i hit the power button.
- 9 replies
-
- change
- variablestate
-
(and 5 more)
Tagged with:
-
I have assigned custom buttons of the remote to turn on/off the tv or projector. Since the projector cannot be turned off immediately once it is turned on, i have added timers to update a variable called 'CommandIsReadyToSend'. If the variable 'CommandIsReadyToSend' is 'True', the functions assigned to the custom buttons would work. If not, the command is not sent.
- 9 replies
-
- change
- variablestate
-
(and 5 more)
Tagged with:
-
@Crustyloafer The TV and projector are in the same room. I have created a IR driver for the TV. If i turn on/off the TV using the remote, I can't get a feedback from the TV to check whether it's on or off. So i'm updating another variable to assume that the TV is on/off. So if someone clicks the power button from the mobile phone, it should turn the tv on/off based on the variable state and update the variable. This is required because if i turn on the projector, the TV should turn off or if the TV is already turned off, it should ignore the TV
- 9 replies
-
- change
- variablestate
-
(and 5 more)
Tagged with:
-
I have a Boolean variable called test. I want this variable state to toggle when i press the power button from the mobile phone or touch screen. However, i can use other buttons to change the state, but for the power button the state of the variable doesn't change. What is the reason for this?
- 9 replies
-
- change
- variablestate
-
(and 5 more)
Tagged with:
-
I managed to setup the door station. It worked perfectly. When I pressed the door bell button I was able to receive a call to my In-wall touch screen. But on the next day i tried ringing the bell and it didn't work. So i had to remove and re-add the drivers once again and then it started to work and i was able to receive calls. But on the next day it stopped working. What could be the reason for this?
-
- doorstation
- stoppedworking
-
(and 2 more)
Tagged with:
-
Hi @LollerAgent Could you please share a screen shot of the connections that you have made in composer pro project. I need to try the same. Thank You!
-
Current I'm working on a learning project in my office. Hoping to apply the knowledge to a showroom later.
-
Sorry guys, I have a bad habit of using tags. I didn't know it was an issue. Really sorry.
-
Hi @Hometronics-SF, For a moment dont think abt the AVR. I removed the AVR. Let me explain. If I connect the HDMI output port of the EA-5 to the input HDMI port of TV via a HDMI cable, i get the OSD on my TV and everything works fine. If I use a HDBaseT (transmitter & receiver) instead of a direct HDMI cable, i don't get the OSD on my TV. The HDMI signal is not getting transmitted.
-
Hi @Hometronics-SF Yes I tried it. Still it doesn't display the OSD. HDMI port of TV is not getting a signal. But with a direct HDMI cable i get the OSD.
-
Hey @Hometronics-SF, If I connect the EA-5 Directly to the TV via HDBaseT instead of connecting it via the AVR, i still get this issue. Could it be a defect in the product?
-
I have connected the HDMI output of EA-5 to a Denon Receiver. When I plug the HDMI output of Denon Receiver to the HDMI input of TV via HDBaseT, i cannot view the OSD. No signal is received. Randomly it starts working, but then it stops working if i unplug the cables and reconnect (Or even after reboot). It worked for two days without an issue and suddenly stopped working. What is the issue?