mpeccon

Our company has been in the Commercial field for the last 1.5yrs, but now starting with Residential. We are working with a builder on the New Build side of things and looking to staff a team for both new builds and also retro work. Located in Leander, Tx and focused work in Central Texas. Specifically have a few big jobs coming up in New Braunfels. Offering very competitive wages and 40hrs a week!

Our company has been in the Commercial field for the last 1.5yrs, but now starting with Residential. We are working with a builder on the New Build side of things and looking to staff a team for both new builds and also retro work. Located in Leander, Tx and focused work in Central Texas. Specifically have a few big jobs coming up in New Braunfels. Offering very competitive wages and 40hrs a week!

I'm looking for an installer/programmer in the Greater Austin Area. Please reach out for more details!

How much for the SW120277 switches? Are they engraved or no? Also how about the CD-KC120277 configurable keypads?

Hey guys - sorry... didn't see the other ask @Carboranadum - Bond did not work. It would see it through the app, but couldn't get it controlled through the C4 app. However, the Automate Pulse 2 (must be the 2) worked like a charm and was able to use the c4 application. @evil0ne - I hear ya, but really not close in price at all especially with selection. Width: 70 3/4" Height: 71 " Mount Type: Inside Color: Metro/Platinum Q66 5% Total - Shipped and Tax - $400.48 With all they have to offer this would have saved us almost 10k alone in the house. However, I'm glad I started with only one as we realized that we didn't like the roller shade (at least the 5%) as it made the house feel too closed in so we are going to go a different route. If you have clients i'd highly suggest them go to blindster and get samples (free) and then go this route. That should then free up budget for other C4 applications and make you more money!!!

Thanks! Yeah, looks like I should be good. https://www.automateshades.com/resource/set-up-guide-control4-pulse-2/

So i've been told that the Automate Pluse works with the Rollease motors!!!! I'm ordering a hub today and hopefully going to be able to try these out shortly. IF this works i'll make sure to update everyone. Could be a way to save a TON of money!!!

Well damn... I got this one from eBay. Guys were awesome and sent me another that's working and said to keep this one for parts. Didn't know if I had any luck swapping for the nic...

I took the top off and it looks like it is soldered to the board. Is there any work around? Attached is a video of what the card is doing. My tech said that the NIC is bad. 20200721_154548.mp4

blindster.com is the blind company. They are out of houston. incredible prices and really nice quality. Example - 70"x70" motorized roller 5% shade was $425 shipped. The same for hunter douglas was over $1,000... that's why i'm hoping for a solution to work these blinds.

Well... I'm glad you said that. I reached out to Bond and got someone different. Vs. being told they only work with Somfy blinds they gave me this to try. I figured i'd put it here so if anyone searches in the future they could have a potential work around. I'm going to give it a shot in an hour. Your remote with FCCID VYY-DD5712 is not yet tested or supported by the bond. Since the remote's frequency falls in the supported frequency range, you can try to manually program each functions. One moment while I sent you some steps to try. - Use new remote batteries to make sure it can support the programming - Press and hold the button from the remote during programming or if it doesn't record, please try the steps again but this time repeatedly press and release the button. - It is important that the remote is next to the Bond when programming - Click + (plus) sign - Select "Remote Control" then choose your bond - Select "Shades" - Select "Other" then choose the location and click continue - Please try to program one function first - Click on "Advanced Setting" - Select "Signal type" and choose "Radio Frequency (RF)" - Enter remote’s frequency range 433.91 or 433.92 - Turn off "Search Remote Database" and click save - Select "Start" and continue with the pairing process - When the system displays the test with just the button, test if it works. If so, click yes or this is my remote. - Click Done.

Thanks! If I could get to the C4 integration that would be awesome. I'm needing to find the bridge that can get me to the application that then would also work with C4. As of right now I'm stuck at finding a bridge that will pick up the RF and sync.

I wish we made it to the C4 part... We only made it to getting the RF remote to pair to the Bond application on the phone and the bond hub... Never even got to the part of pulling the drivers into C4 and that side of thigns. So now trying to find another bridge that might work with these remotes. I was provided this link by my installer and i've reached out to them, but haven't heard anything back. Hopefully y'all know a bridge that will work with the remote and C4 so i can get these working. https://www.rolleaseacmeda.com/us/products/smarthome Was told the Hub at the bottom is what would work.

Sure! So I talked with Bond and they said that their bridge will recognize the frequency, but they only will work with Somfy (sp). So going through the Bond application, setup and everything worked/sync'd, but when you tried to use the app to actually raise/lower it didnt do anything. FCC ID - VYY-DD5712 433.92MHz

Thanks! Found out that the NIC is bad. Good thing is the seller has a 2nd unit they are able to ship. Interesting though that if the light goes green on the left and orange on the right and back and forth that the NIC is bad.

Hey Guys, So i bought a few bond bridges since they work with C4 and are able to control RF signals. Well, thought it would be that easy, but it wasn't. C4 programming was easily able to work with Bond, Bond easily connected with the remote, but the app wouldn't connect to the blinds. I contacted Bond and they said that their bridge could recognize, but not work with the remote. I gave them the FCC ID and they told me in 1 min. Does anyone know any other bridges that could work in this application? Blindster.com blinds are inexpensive, but awesome... so trying to save some money on 32 of them in the house.

Hey guys, I got a used system to add more zones since i'm over my 12. Well, when i connect the "new" unit i get a blinking light on the Ethernet port in orange vs. just the solid green. Looking at the switch it doesn't seem to recognize it. Does something need to be unprogrammed from the "used" unit before i can just plug it into my system (have a C4 installer here now saying they can't get it online).

Cool... hit me up!

Which model? I'd take all six if the newer ones.

Thanks! I saw that, but it said switch so i wasn't sure if that meant something simlar to the actual swich and not the outlet. Hopefully these guys can figure it out! Really appreciate it!

Hey Guys, I just had a company come over to the house to do a system takeover (long story). Well, I decided to also add additional things in the house. One of those items were a 6 button programable switch and four of the outlets you plug into an outlet (control lamps or whatever you plug into them). They had no issue with getting them to turn on and stay on. However, apparently they are dimmable outlets. The problem is i have LED upper/lower cabinet lights that plug into those outlets so when they get turned "off" apparently there is still a small voltage that go through the outlets so the flicker. Has anyone run into this issue and if so, what is the fix? For now we just unplugged them because the technician wasn't sure if there were ones that didn't have the dimmable feather (that would solve the issue).

Hey Guys, I just had a company come over to the house to do a system takeover (long story). Well, I decided to also add additional things in the house. One of those items were a 6 button programable switch and four of the outlets you plug into an outlet. They had no issue with getting them to turn on and stay on. However, apparently they are dimmable outlets. The problem is i have LED upper/lower cabinet lights that plug into those outlets so when they get turned "off" apparently there is still a small voltage that go through the outlets so the flicker. Has anyone run into this issue and if so, what is the fix? For now we just unplugged them because the technician wasn't sure if there were ones that didn't have the dimmable feather (that would solve the issue).

We changed from AT&T over to Suddenlink and I'm getting everything else to work, but when I go to play music the songs will play through Pandora on the app, but I'm not getting any audio. The only thing I noticed that seems different behind the two different audio amps is a blinking orange light on the right side. I have a C4 - 8 Amp 1 - B and a C4 - 16 amp 3 - B. Our separate network is working just fine. Have been trying to get in touch with our installer with no luck and have people coming over tomorrow.

I'm having the exact same issue. We just switched from suddenlink to att uverse. I can control my lighting, but cannot control pandora - it says it cant connect. I wouldn't even consider myself a beginner in the control4 side of things... what did y'all do to get it to work? If i try to log into pandora through the app it brings up the "cant connect" screen so quickly i can't go add anything.

Need a hand! We moved from suddenlink to uverse on Friday. I have an araknis network (not a fan, but that's for another day) and we bypassed the araknis router and went straight to the swtich. All of my AP's are working in the house and my internet is great. When i lot into my control4 app i am able to control my lighting, but when i click on "listen" and go to music my pandora won't work. I get the attached screen. Does anyone have any clue how we can get this up and running? We have people coming over today and i don't want to bother our control4 dealer on a sunday.