joepap Posted December 8, 2015 Share Posted December 8, 2015 Morning everyone, I have always been a fan of the harmony remotes. Does anyone have these working with the control 4 system? I'm not even sure where to start to see if it would work. The hub seems capable of doing a lot....the question is...is it enough? thanks, Joe! http://www.logitech.com/en-us/product/harmony-elite Link to comment Share on other sites More sharing options...
lippavisual Posted December 8, 2015 Share Posted December 8, 2015 Won't happen at all with C4's current lineup, no IR inputs on newer controllers. Link to comment Share on other sites More sharing options...
thecodeman Posted December 9, 2015 Share Posted December 9, 2015 It's possible with third party hardware but takes quite a bit of legwork programming wise. Link to comment Share on other sites More sharing options...
turls Posted December 9, 2015 Share Posted December 9, 2015 I have always been a fan of the harmony remotes. Does anyone have these working with the control 4 system? I was too before I got Control4. I've had Harmony remotes since before they were bought by Logitech. I was VERY skeptical I would make the switch. It didn't take long and I never looked back. Link to comment Share on other sites More sharing options...
Alex Lewis Posted December 9, 2015 Share Posted December 9, 2015 The old controllers (hc200 and 300) had ir inputs you could then make control the c4 system. If you can get either an it reader that works with c4 or maybe rs232 to send commands then you could get something to work. Make the jump and use an Sr260Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
joepap Posted December 9, 2015 Author Share Posted December 9, 2015 thanks everyone! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.