amzscam Posted July 11, 2014 Share Posted July 11, 2014 Hi can anybody advice how to integrate hunter Douglas remote wireless blinds connected to the wifi network with the c4 system please ? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
SMHarman Posted July 11, 2014 Share Posted July 11, 2014 Platinum bridge and the contril4 driver for it. Sent from my LT26i using Tapatalk Link to comment Share on other sites More sharing options...
zaphod Posted July 11, 2014 Share Posted July 11, 2014 The platinum bridge will work on newer HD blinds. If they are older than you will have to use other methods, such as IR blasting. I have both types of HD blinds in my house - I have a platinum bridge but it isn't integrated into C4, at least not yet. Link to comment Share on other sites More sharing options...
SMHarman Posted July 11, 2014 Share Posted July 11, 2014 He blinds can be on the WiFi network but still need ir blasted? Sent from my LT26i using Tapatalk Link to comment Share on other sites More sharing options...
AK1 Posted July 17, 2014 Share Posted July 17, 2014 If you have the Hunter Douglas Platinum Gateway (allows control of blinds from mobile devices), you can send TCP commands to the blinds to open / close etc. You create your scenes in the HD Platinum mobile app and then send TCP command in the form $INMxx on TCP port 522 to the Gateway IP address where xx is 00, 01, 02 and so on corresponding to each scene you created in the order they appear in your mobile app e.g. $INM01 invokes the second scene you created. You can use Alan Chows TCP event driver for this - takes a minute or two to setup at most. Link to comment Share on other sites More sharing options...
hauser7 Posted July 17, 2014 Share Posted July 17, 2014 There is a driver from theory: www.theoryav.com/blog/ your dealer can get in touch with them to find out the price of the driver. You also need the platinum bridge/gateway. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
EDDY7 Posted July 18, 2014 Share Posted July 18, 2014 I have the Older version of HD blind - RF how can I integrate into C4.Please advise. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.