Topfox Posted August 3, 2019 Share Posted August 3, 2019 All, Hooked a switch up to my pool lights. The pool lights will change colors based on how many times you turn the switch on/off/on. Example: If I turn the switch on/off 8 times the light will shine blue, if I do it 9 times it will be green, and on and on... Trying to figure out how to configure this in HE so I can have a scene for each color....assuming scenes is the best option to use for this use case. Can anyone explain it to me real quick or give me an example of what I configuration should look like? Thanks! Quote Link to comment Share on other sites More sharing options...
sonic30101 Posted August 3, 2019 Share Posted August 3, 2019 Create macros and fire them accordingly when the lighting scene is invoked is probably the easiest way to do it. You could also use experience buttons but that would require a dealer to install those drivers Quote Link to comment Share on other sites More sharing options...
Topfox Posted August 3, 2019 Author Share Posted August 3, 2019 So Im a total noob when it comes to scenes, and more specific guidance you can provide on the Scene creation piece? Quote Link to comment Share on other sites More sharing options...
Topfox Posted August 3, 2019 Author Share Posted August 3, 2019 Actually I think I got it. Thanks! Quote Link to comment Share on other sites More sharing options...
Topfox Posted August 7, 2019 Author Share Posted August 7, 2019 Ok. So I have multiple scenes that once invoked it runs through the appropriate on/off routine for selecting the programmed color. Example: I have a scene labeled Blue and a scene labeled Green. Blue flips the switch 8 times, Green flips the switch 9 times. That all appears to be working good. My question is in relation to status of the scene in navigator. The probably I have is if I select Blue for example the status icon for all my scenes will show on in the UI. Is there any way to prevent this so the only scene that shows on is the one I selected? Each scene is the same single light switch, so I can understand why this would happen, it being basically a single load. Just wondering if I missed a way around this. Quote Link to comment Share on other sites More sharing options...
Bmwbball88 Posted May 31, 2021 Share Posted May 31, 2021 @Topfox did you ever by chance get around this last problem? I’m configuring a switch right now to control my pool lights. Quote Link to comment Share on other sites More sharing options...
Topfox Posted May 31, 2021 Author Share Posted May 31, 2021 36 minutes ago, Bmwbball88 said: @Topfox did you ever by chance get around this last problem? I’m configuring a switch right now to control my pool lights. I actually switched to experience buttons Quote Link to comment Share on other sites More sharing options...
Bmwbball88 Posted May 31, 2021 Share Posted May 31, 2021 Ah. Which one if you don’t mind me asking? Quote Link to comment Share on other sites More sharing options...
Matt Lowe Posted June 1, 2021 Share Posted June 1, 2021 On 5/30/2021 at 10:25 PM, Bmwbball88 said: Ah. Which one if you don’t mind me asking? loots of good options. there is a RGB Light driver. there is a scenario driver. you could you simple toggles. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.