Baubas Cat Posted August 8, 2019 Share Posted August 8, 2019 All of a sudden my remotes are barely working. When I press a button to turn on the remote screen it seems to take a bit longer than usual and now it takes several button presses before the signal seems to work. It's not just input commands, it's also buttons like watch and listen. Quite often when pushing buttons I will get an hourglass until the room shows up again. This is happening with two remotes. Is it possible they have just gone bad? Connection signal to the network is strong. I have tried restarting the controller and leaving the mesh and identifying again but it doesn't help. Any suggestions or thoughts? For now I am using the Control4 app on my phone with no issues but it is way more inconvenient and functional as the SR260 remote for TV. Quote Link to comment Share on other sites More sharing options...
chopedogg88 Posted August 8, 2019 Share Posted August 8, 2019 Perhaps some other wireless device was introduced into your home and is causing interference. Or some other zigbee device that they were connected through has fallen offline. I wouldn't trust the signal indicator in Composer.You could try changing the zigbee channel and see if that helps, it certainly may if the issue is being caused by interference. Sent from my SM-G975U using Tapatalk drro, Baubas Cat, Neo1738 and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Baubas Cat Posted August 8, 2019 Author Share Posted August 8, 2019 Thank you chopedogg88. Changing the zigbee channel seems to have fixed the issue. Hopefully the effects are long lasting. drro 1 Quote Link to comment Share on other sites More sharing options...
Dre349 Posted February 19, 2023 Share Posted February 19, 2023 On 8/8/2019 at 9:45 AM, chopedogg88 said: Perhaps some other wireless device was introduced into your home and is causing interference. Or some other zigbee device that they were connected through has fallen offline. I wouldn't trust the signal indicator in Composer. You could try changing the zigbee channel and see if that helps, it certainly may if the issue is being caused by interference. Sent from my SM-G975U using Tapatalk @chopedogg88 I have the same remote and it will not turn on at all..... I have tried everything including changing the batteries, reset using 0 and the red 4 button etc! Any suggestions would be greatly appreciated! Quote Link to comment Share on other sites More sharing options...
Amr Posted February 19, 2023 Share Posted February 19, 2023 11 hours ago, Dre349 said: If u reset the remote it need to be re added to your project again, have your dealer connect it again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.