C4 User Posted November 6, 2021 Share Posted November 6, 2021 My Jura GIGA 6 has iOS app control via what they call JOE. JOE is available on many of the Jura machines. It would be awesome to integrate JOE into C4. Quote Link to comment Share on other sites More sharing options...
eggzlot Posted November 6, 2021 Share Posted November 6, 2021 17 minutes ago, C4 User said: My Jura GIGA 6 has iOS app control via what they call JOE. JOE is available on many of the Jura machines. It would be awesome to integrate JOE into C4. Has Siri Control so maybe look at one of the 2 HomeKit drivers and ask those developers if this would work? https://drivercentral.io/platforms/control4-drivers/utility/siri-voice-module/ https://www.varietassoftware.com/control4/ Quote Link to comment Share on other sites More sharing options...
C4 User Posted November 6, 2021 Author Share Posted November 6, 2021 25 minutes ago, eggzlot said: Has Siri Control so maybe look at one of the 2 HomeKit drivers and ask those developers if this would work? https://drivercentral.io/platforms/control4-drivers/utility/siri-voice-module/ https://www.varietassoftware.com/control4/ That would be interesting. If this works, I may also support Tempurpedic integration as well. Once I get Josh installed, I will reach out and see if one of these solutions will allow commands from Josh instead of Siri. Quote Link to comment Share on other sites More sharing options...
JSTRONG Posted December 6, 2021 Share Posted December 6, 2021 I have josh , giga6 joe and temperpedic bed. I tried using bond bridge to my bed but it didn’t work. The iOS app for joe is pretty good. Not freaking sure what the hell c4 would do better. Quote Link to comment Share on other sites More sharing options...
zaphod Posted December 8, 2021 Share Posted December 8, 2021 On 12/6/2021 at 10:00 AM, JSTRONG said: I have josh , giga6 joe and temperpedic bed. I tried using bond bridge to my bed but it didn’t work. The iOS app for joe is pretty good. Not freaking sure what the hell c4 would do better. It would be nice to just add it to your wake up routine in C4. Quote Link to comment Share on other sites More sharing options...
zaphod Posted December 8, 2021 Share Posted December 8, 2021 HomeAssistant hack: https://community.home-assistant.io/t/control-your-jura-coffee-machine/26604 Quote Link to comment Share on other sites More sharing options...
booch Posted December 22, 2021 Share Posted December 22, 2021 If for some reason the software integration doesn't work, I found it pretty easy to just splice into the button on my (Breville) coffee maker with a Z2IO relay. Have it tied to my 'morning' routine and works great! Quote Link to comment Share on other sites More sharing options...
zaphod Posted February 16, 2022 Share Posted February 16, 2022 On 12/22/2021 at 12:24 AM, booch said: If for some reason the software integration doesn't work, I found it pretty easy to just splice into the button on my (Breville) coffee maker with a Z2IO relay. Have it tied to my 'morning' routine and works great! Interesting - how did you do this? I have a Breville espresso maker and it would be nice to have it turn on so that I don't have to wait the minute or two that it takes to heat up. In an ideal world you would leave the portafilter under the grinder and you would be able to use C4 to turn on the mahcine to warm up, grind your beans, run a single cup cycle to purge the machine. Quote Link to comment Share on other sites More sharing options...
booch Posted February 17, 2022 Share Posted February 17, 2022 10 hours ago, zaphod said: Interesting - how did you do this? I have a Breville espresso maker and it would be nice to have it turn on so that I don't have to wait the minute or two that it takes to heat up. In an ideal world you would leave the portafilter under the grinder and you would be able to use C4 to turn on the mahcine to warm up, grind your beans, run a single cup cycle to purge the machine. My unit has a primary button that you press once to turn the unit on and press again to brew (basically works the same for shutdown as well). I just soldered into the microswitch and use a Z2IO to drive/time the closures -- it's rock solid. Quote Link to comment Share on other sites More sharing options...
zaphod Posted February 17, 2022 Share Posted February 17, 2022 Thanks. Mine would be a little trickier as I have an espresso machine that has several buttons. Quote Link to comment Share on other sites More sharing options...
booch Posted February 20, 2022 Share Posted February 20, 2022 On 2/17/2022 at 4:14 PM, zaphod said: Thanks. Mine would be a little trickier as I have an espresso machine that has several buttons. Totally get it. That said, the Z2IO has several channels, so depending on how motivated you were, it's likely possible. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.