Posted August 14, 20222 yr I got an older DSC Power series (1832 or something like that) Years ago we removed 2 windows in our kitchen and added a door in there to go to the patio. It was never relabeled properly so there is no delay for exit/entry. So if the alarm is on and we enter that door the alarm goes off ASAP I have the master code to the panel (when doing C4 install the installer gave it to me to work with the C4 dealer). anyone have any simple instructions on how to change a zone from a “window” to a “door” or just “Add” an entry/exit delay on a zone?
August 14, 20222 yr Look up DSC on YouTube. Lots of How To videos for programming. The change you want to make should be an easy one.
August 14, 20222 yr Author 30 minutes ago, C4 User said: Look up DSC on YouTube. Lots of How To videos for programming. The change you want to make should be an easy one. Thanks I’ll keep looking. Most of what I have found so far (well really all that I found) was how to change the amount of time in the exit/entry delay. Not yet on how to change a zone to allow it to take advantage of the predefined time of an entry/exit delay. Was hoping someone on here just had a short cut for me 🙂
August 14, 20222 yr You need to change that zone type from perimeter to entry/exit. You should be able to easily find that in the manual, I don't do enough DSC to be able to tell you exactly which field that is in.
August 14, 20222 yr See manual above - if I remember correctly, *8 followed by the installer’s code will get you access to change zone types.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.