joemci Posted August 6, 2010 Share Posted August 6, 2010 Does anyone have a serial driver for the monorpice HDMI 4x4 matrix switch? I know several people here use it, and am looking for an inexpensive matrix switch for my system.Thanks,Joe Link to comment Share on other sites More sharing options...
kap0614 Posted August 6, 2010 Share Posted August 6, 2010 If you give me the codes i can write a one way driver for you in a hurrykparker@control4.com Link to comment Share on other sites More sharing options...
ILoveC4 Posted August 6, 2010 Share Posted August 6, 2010 NICE! A Control4 employee here offering to write a driver on the spot for someone! This is the type of support we need! Has C4 turned over a new leaf?I have a serial driver for it, but I don't have it on this computer. Plus, it was written by another forum member - I'd need to get permission first. Link to comment Share on other sites More sharing options...
kap0614 Posted August 6, 2010 Share Posted August 6, 2010 I wrote it but cannot test it because I do not have the piece. Link to comment Share on other sites More sharing options...
kap0614 Posted August 6, 2010 Share Posted August 6, 2010 http://www.c4forums.com/uploaded/avswitch_MonoPrice_4x4HDMI Rev3.0.c4i I just uploaded to this site. I believe it takes a null modem cable. Pin 5 to 5, pin 2 to 3, pin 3 to 2.Let me know if it works. One way drivers are easy. There are good instruction on how to format your serial commands in the Composer Pro User Guide online. Just search Entering Serial Codes. Link to comment Share on other sites More sharing options...
kap0614 Posted August 6, 2010 Share Posted August 6, 2010 It look like you need to copy and past the whole link into your browser. It left off the end of the it. Link to comment Share on other sites More sharing options...
joemci Posted August 6, 2010 Author Share Posted August 6, 2010 Wow, what a quick response. I will be getting the switch sometime next week, so I will let you know if it works then.Thanks!Joe Link to comment Share on other sites More sharing options...
wappinghigh Posted August 6, 2010 Share Posted August 6, 2010 I'll second Dan big time. :D:D Wow: a C4 employee helping out on driver requests....this is huge....Sir/Madam...Are you going to be a permanent "fixture" on the forum? Link to comment Share on other sites More sharing options...
kap0614 Posted August 7, 2010 Share Posted August 7, 2010 I will help where I can. I am in sales and I mostly visit and help dealers in TX, LA and NM. Travels keep me busy but will do what I can.Kim-Anthony Parker Link to comment Share on other sites More sharing options...
ILoveC4 Posted August 7, 2010 Share Posted August 7, 2010 Nice...so do we call you Kim, Anthony, Kim-Anthony, or kap0614? Link to comment Share on other sites More sharing options...
dogdvr Posted August 7, 2010 Share Posted August 7, 2010 I always called him Kim, I think that will be fineBrent Link to comment Share on other sites More sharing options...
thecodeman Posted August 7, 2010 Share Posted August 7, 2010 I will help where I can. I am in sales and I mostly visit and help dealers in TX, LA and NM. Travels keep me busy but will do what I can.Kim-Anthony ParkerSay hi next time you're in the area Link to comment Share on other sites More sharing options...
jwhitaker@revit Posted August 8, 2010 Share Posted August 8, 2010 wut up kim! Link to comment Share on other sites More sharing options...
joemci Posted September 4, 2010 Author Share Posted September 4, 2010 Kim, just had a chance to hook up the switch and driver. All works, except two of the codes were missing the Macros to command the switcher - I think it was input 2 to output 2, and one of the other ones either before or after it. I added it to the driver on my end. Thanks for putting it together. Joe Link to comment Share on other sites More sharing options...
FEnriquez Posted March 4, 2011 Share Posted March 4, 2011 Hello all, I just ordered this HDMI matrix and im building my project so when it comes in i can just install it. The link for the driver doesn't work anymore. Anyone know where I can get the driver for this? Thanks Link to comment Share on other sites More sharing options...
joemci Posted March 4, 2011 Author Share Posted March 4, 2011 I just uploaded the revised version. Kim and Control4 wrote it and I fixed a couple of missing commands in there. It works great. Now if only they would come out with an 8x8 switch!I attached the driver here, but also uploaded to the File Library. So, if anyone ever needs it, just go to the File Library and search for the MonoPrice HDMI switch. Joe Link to comment Share on other sites More sharing options...
AJ_ Posted March 4, 2011 Share Posted March 4, 2011 8x8 is coming soon according to Monoprice. No hard ETA though. Link to comment Share on other sites More sharing options...
servpro Posted March 4, 2011 Share Posted March 4, 2011 8x8 is coming soon according to Monoprice. No hard ETA though.I know, I have been waiting. Good thing I am not in a hurry Link to comment Share on other sites More sharing options...
FEnriquez Posted March 9, 2011 Share Posted March 9, 2011 How would i get this driver on my project? I tired copy and paste into the driver folder, but will not show up in composer.... even with a restart. Help? Link to comment Share on other sites More sharing options...
c44me Posted March 9, 2011 Share Posted March 9, 2011 out of curiosity what is the longest run anyone has accomplished with one of these? I've got 1 that is fairly long and it failed. Link to comment Share on other sites More sharing options...
ILoveC4 Posted March 9, 2011 Share Posted March 9, 2011 out of curiosity what is the longest run anyone has accomplished with one of these? I've got 1 that is fairly long and it failed.HDMI is only rated to 15m. Me personally, if it is anything in wall I would use cat cable and baluns. Link to comment Share on other sites More sharing options...
AJ_ Posted May 17, 2011 Share Posted May 17, 2011 Anyone know what the serial code is for power to the Monoprice HDMI switch. This is the only thing missing in my driver (posted by Kim). Currently Power outage = walking down to power on the matrix.AC Link to comment Share on other sites More sharing options...
Jaffacree Posted July 10, 2015 Share Posted July 10, 2015 Does anyone have an IR driver made for the monoprice 8x1 hrm2218f HDMI Switch? Link to comment Share on other sites More sharing options...
c44me Posted July 10, 2015 Share Posted July 10, 2015 years ago I tried a couple of these from them. both had to go back due to known issues with denon receivers. YMMV. Link to comment Share on other sites More sharing options...
Jaffacree Posted July 11, 2015 Share Posted July 11, 2015 OK, I will just have to make one. Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.