Remie Posted August 26, 2016 Share Posted August 26, 2016 I wonder if anyone can create a driver to netatmo weather station. https://www.netatmo.com/en-US/product I have seen other been discussing the same, but havent put a request on this site. It's a cheap and nice product that would be great in Control 4. Link to comment Share on other sites More sharing options...
alanchow Posted August 27, 2016 Share Posted August 27, 2016 1 hour ago, Remie said: I wonder if anyone can create a driver to netatmo weather station. https://www.netatmo.com/en-US/product I have seen other been discussing the same, but havent put a request on this site. It's a cheap and nice product that would be great in Control 4. You can connect Netatmo weather to Control4 via the Chowmain IFTTT maker driver. https://ifttt.com/netatmo Link to comment Share on other sites More sharing options...
Remie Posted September 10, 2016 Author Share Posted September 10, 2016 Do you know if its possible to get all of the functunality of the netatmos weather station? Like reading temp, moiture, co2 level, pressure, noice? I only saw the facial recognition in the FAQ. I haven bought the weather station yet so I can't try it with trial version. Link to comment Share on other sites More sharing options...
alanchow Posted September 10, 2016 Share Posted September 10, 2016 3 hours ago, Remie said: Do you know if its possible to get all of the functunality of the netatmos weather station? Like reading temp, moiture, co2 level, pressure, noice? I only saw the facial recognition in the FAQ. I haven bought the weather station yet so I can't try it with trial version. Here are all the triggers you can get from IFTTT. Looks like you can get immediate triggers when rain, temp, wind, c02, noise, etc go above or below a certain amount. You can also send some of yesterday's information to Control4. Might be useful if you join that upto our event logging driver so that you can see stats on yesterday's conditions on your touchscreens, onscreen or iOS/android based navigators. check out the bottom of the following URL for the lost of triggers. https://ifttt.com/netatmo Link to comment Share on other sites More sharing options...
VegardK Posted July 1, 2017 Share Posted July 1, 2017 On 9/10/2016 at 9:29 PM, alanchow said: Here are all the triggers you can get from IFTTT. Looks like you can get immediate triggers when rain, temp, wind, c02, noise, etc go above or below a certain amount. You can also send some of yesterday's information to Control4. Might be useful if you join that upto our event logging driver so that you can see stats on yesterday's conditions on your touchscreens, onscreen or iOS/android based navigators. check out the bottom of the following URL for the lost of triggers. https://ifttt.com/netatmo Triggering is not the same as reading. I don't care much about triggering from netatmo. I want to see inside the C4 app live readings of the different values. Also triggering through IFTTT is not preferred as it's sometimes very slow and unreliable. Best would be if someone made a proper Netatmo driver. I don't understand why nobody have made one. Netatmo has been on the market for years and they have had open API for quite some time... Link to comment Share on other sites More sharing options...
Gary Leeds UK Posted July 2, 2017 Share Posted July 2, 2017 our weather station reports to weather underground. so we use the C4 weather underground driver Link to comment Share on other sites More sharing options...
DLite Posted August 3, 2018 Share Posted August 3, 2018 While this is an old thread, I still wonder about this question. I had been using the Wunderground driver to get the readings from my Netatmo station into C4. But sadly Netatmo and Wunderground ended their partnership in May, so the PWS data no longer get uploaded to Wunderground. On the brighter side, maybe now there is more demand for a Netatmo driver? Link to comment Share on other sites More sharing options...
zaphod Posted August 3, 2018 Share Posted August 3, 2018 Can Netatmo upload data to other "generic" weather websites? I think this would make more sense. In the past you could upload data from a personal weather station to Weather Underground and the just access the data from Weather Underground's API, but that option is going away. The advantage of this is that we don't need separate drivers for every piece of hardware. Link to comment Share on other sites More sharing options...
VegardK Posted August 7, 2018 Share Posted August 7, 2018 I have HomeSeer a Z-Wave system that is integrated with Control4. The Netatmo is integrated trough an API plugin in HomeSeer where all readings comes in. I then link this to C4. Not ideal at all, and not something I can do for all customers. So I really hope someone can create a driver for Netatmo to C4. One problem/challenge is that I haven't seen any visual way for C4 to represent Co2 or LUX? How would this be done in C4? Link to comment Share on other sites More sharing options...
msgreenf Posted August 7, 2018 Share Posted August 7, 2018 10 minutes ago, VegardK said: I have HomeSeer a Z-Wave system that is integrated with Control4. The Netatmo is integrated trough an API plugin in HomeSeer where all readings comes in. I then link this to C4. Not ideal at all, and not something I can do for all customers. So I really hope someone can create a driver for Netatmo to C4. One problem/challenge is that I haven't seen any visual way for C4 to represent Co2 or LUX? How would this be done in C4? in the extras tab Link to comment Share on other sites More sharing options...
DLite Posted August 8, 2018 Share Posted August 8, 2018 I recently came across the MeteoWare Plus website. It appears to pull down Netatmo data using its API and then funnel it back to Wunderground. (I guess this substitutes for what Netatmo used to do for its users directly.) I got it working just now, although I can't yet comment on reliability and consistency. My fingers are crossed that this brings back the option of pulling in a Netatmo station to C4 via Wunderground. Has anyone ever used this tool before? Link to comment Share on other sites More sharing options...
VegardK Posted September 12, 2018 Share Posted September 12, 2018 On 8/7/2018 at 10:55 AM, msgreenf said: in the extras tab The temperature display driver does not have an extra tab. only thermostats. Link to comment Share on other sites More sharing options...
msgreenf Posted September 12, 2018 Share Posted September 12, 2018 3 minutes ago, VegardK said: The temperature display driver does not have an extra tab. only thermostats. then this isn't being pushed across Link to comment Share on other sites More sharing options...
Question
Remie
I wonder if anyone can create a driver to netatmo weather station. https://www.netatmo.com/en-US/product
I have seen other been discussing the same, but havent put a request on this site. It's a cheap and nice product that would be great in Control 4.
Link to comment
Share on other sites
12 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.