Luvtech Posted January 1, 2022 Share Posted January 1, 2022 I have the Annex4 LG TV driver, which was great for a while. About a year or two ago, when I shutdown, the TV appears to go off for a second, and then turns right back on. Any ideas would be appreciated! Quote Link to comment Share on other sites More sharing options...
tdougray Posted January 1, 2022 Share Posted January 1, 2022 Wow you’ve put up with this for a yr or 2! Fair play, would of done my nut in a lot sooner! Quote Link to comment Share on other sites More sharing options...
Neo1738 Posted January 1, 2022 Share Posted January 1, 2022 Is it IP controlled or IR? If IR maybe needs longer command to turn off. If not than you could program "When room turns off delay 5 sec" If TV on turn off TV. Might be a work around. Otherwise also check IP is static. Quote Link to comment Share on other sites More sharing options...
South Africa C4 user Posted January 1, 2022 Share Posted January 1, 2022 I assume CEC is off? If not, turn it off and all should be good again. Neo1738 1 Quote Link to comment Share on other sites More sharing options...
Rexabyte Posted January 1, 2022 Share Posted January 1, 2022 If you set the 'Debug Mode' property to 'Debug' in the driver and replicate the issue I can take a look, just PM me the Lua output or open a ticket on our site and provide it there. Should tell me if its the driver causing it (by sending WOL packets) or something external (like CEC mentioned above.) The last time someone reported something similar they had setup programming to send a WOL command to power on the TV when they detected the TCP port disconnect (which happens on TV off.) Neo1738 and South Africa C4 user 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.