Tokead

For the last couple of months, I've being having issues with some of my Axis cameras not displaying. THey work, then they dont. I've upgared to 3.12 from 2.1x.x. As far as I know it's the same driver. The cameras are a M1011 and M1033. Ive added screenshots of the settings in HE and the camera. Any ideas are appreciated

The past light fixtures were transittioned from incadesenet to LED - 9 nulbs. Now one room with 3 incandsecent

It’s a DIM1-Z Sent from my iPhone using Tapatalk

Basic fixture. 3 60 watt incandescent bulbs. Hums until at 100%. Sent from my iPhone using Tapatalk

I did sales for years. Our industry was such that if you tried to quote the job, you didn’t even get the invite. I still take the approach that first and foremost it’s a service industry. If you charge for a bid, you risk the lose of business you didn’t even know was out there. I know that someone can take your quote and go elsewhere, but’s that’s alway being the case Sent from my iPhone using Tapatalk

Ah, didn’t know that. I did ask him. Feel better now. Sent from my iPhone using Tapatalk

I know; I’d like to support him versus bypassing directly to C4 Sent from my iPhone using Tapatalk

My 4Sight just expired and my dealer is away, so I wanted to use my VPN, which I’ve had for years (currently OpenVPN on Pakedge RK1 and iOS). I get the same error over LTE. I just logged into my hotel’s WiFi, and I can access my system. Sent from my iPhone using Tapatalk

I have an Axis m1011 in my project. I recent bought an Axis M1033. I changed the IP address in Composer HE to that of the new camera. It’s still showing the stream from the old camera. Any idea why and what I need to do? Sent from my iPhone using Tapatalk

I just moved the above dimmer. I’m getting humming when it’s below 100%. I didn’t notice this before. It was powering 9 LED bulbs. It’s now powering 3 60 watt incandescent bulbs. Any idea why it’s humming ? Sent from my iPhone using Tapatalk

I have the Epic driver, and I have set up control of my lights. I have 2 areas I'm struggling with: - I read that I can use macros; Epic has on, off, set, etc. How do I build/use a macro that emulates selecting each of these options and programming the action? - How do I tell Alexa to turn on a room and select a certain station without it just playing through the Echo speaker

I can see the live feed if I go direct to the camera. It’s a direct feed to C4. No NVR. It’s being ok the last 2 days Sent from my iPhone using Tapatalk

All sounds good. I’d be happy to have a resource that I can refer to for programming scenes, Alexa etc. if it comes with the benefit of a help session, then that’s great Sent from my iPhone using Tapatalk

I have an Axis M1011 for a number of years in my project. The other month, when under 2.10.6, it stopped showing up. My dealer installed a new driver, and it seemed to work again, periodically not showing up. I've not updated to 3.11.1, and it's not showing up. Nothing has changed. It's still a static IP. I can watch via the IP. When I test, "Get MJPEG URL", I get the following message: URL not verified: Failed to open video stream: Unable to load DLL 'C4ImageStreamer.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)Test failed Any idea what I can change

[emoji3]thanks. A couple of things have being a little weird the last couple of weeks, like lights not showing up. All that’s changed lately is moving a controller and adding a couple of devices with the intent of updating to 3 Sent from my iPhone using Tapatalk

Thanks. It’s being good for a couple of years. Why would it just vanish? Sent from my iPhone using Tapatalk

Nothing happens at all Sent from my iPhone using Tapatalk

The OSD for my EA1 has stopped showing up when I push the 4 button. Is this something I can address in HE? I’ve asked my dealer, but would like to see if I can fix it Sent from my iPhone using Tapatalk

I'ver pulled several Speakerpoints (3) plus one I never used from my project as well as a HC250 and a HC1000 from a while back. All are listed on eBay. Give me an offer. The 250 was on 2.10.6. The 3 speakerpoints were on the last OS supported. The 4th was never installed, so I cant speak to the OS it was on. - https://www.ebay.ca/itm/324074504171 - https://www.ebay.ca/itm/324074504475 - https://www.ebay.ca/itm/324074504881 - https://www.ebay.ca/itm/324074505347 - https://www.ebay.ca/itm/324074505480 - https://www.ebay.ca/itm/324074505644

I just bought a rack to install equipment in. Does anyone have bracket they want to sell for a tuner? Sent from my iPhone using Tapatalk

How can I tell if a scene is active? This week, when we turned on one room, all came on. I’m sure it was a scene. Not sure how to tell nor how to turn it off. Sent from my iPhone using Tapatalk

I bought a z2io and z2ir for two other TVs where we only stream. Figured then I don’t have to worry about future changes Sent from my iPhone using Tapatalk

I haven’t jumped to 3 yet, but I moved an EA1, so I could have OSD. We use it primarily for My Movies selection. Sent from my iPhone using Tapatalk

I have a RK-1x WK-1, P2 PDU and P8 PDU. I’ve managed to set up BakPak, and I can see all devices. I can turn off ports on the P2 but the P8 has issues. The scan found it, and I’ve renamed the ports but I can’t access it. The scan didn’t seem to pick up the serial #, and manually entering it has had no affect. Does anyone know how to get it to act properly? Should I delete it and rescan ? Figured it out: needed to enable Telnet Sent from my iPhone using Tapatalk

I recently trialed and ultimately bought the DSC driver from Domosapiens. I’ve had a series of questions about functionality and programming. They, Paul, have being great with customer service. He’s gotten back to me in 24 hours or less each time responding to each of my questions with clarity. The driver seems to do all I could ask, and with that level of responsiveness, I want to give them a shout out for anyone considering one of their drivers Toke Sent from my iPhone using Tapatalk