tonysss13

I need 3 x T3 backboxes . UK based also will need a number of keypads in the coming months UK based please PM if you can help thanks Tony

Yes the audio works fine, tried power cycling but no use. I'm using the spotify connect in Heos so no drivers to set up, the 3500H works fine like that. Noticed tonight that the room seems to be killing other sessions for some reason, tried playing a zidoo movie which kept plkaying and when i went to the room on the IOS app there was no session active. weird thanks fot the suggestions Kyle

I have two Denon Avr's. A 3500H & a recently added 4700H Both are set up identical, however if i connect direct to the 4700H with spotify, it works fine, however C4 does not start a session. This works perfectly on the 3500H I have bound the Input Heos Music to the heos endpoint as described in the documents. Everything else seems to be connected identical so i'm baffled thanks Tony

thanks Muj

is anybody using one of these in the UK now, i know a few years back the uk firmware didn;t allow it just wondered if that's sorted as considering one

sorry this was meant for the buy & sell board

UK based

have tried this process today using groups, works fine for one room but when i try to do a 2nd room with the same source, say netflix, then only one of the rooms works, the other acts like it's understood the command but does not switch sources. I read somewhere putting a full stop or two after the name gets around the control4 setup alerting you to duplicate names but the commands still don't work. Has anybody got this working?

I seem to have got myself a bit confused here I bought a RA2 Select main repeater and a Radio Powr Savr occupancy sensor in the hope I can use the lutron sensors in C4 programming I have ste up the lutron app fine although it is warning me there is no lighting load assigned to the sensor. In the database there is only a RadioRA2 driver for the powr savr & this will not connect to the RA2 select driver, If I use the RadioRA2 main repeater driver I can make a connection to it but programming does not work. I was not aware there was two different types of main repeater until now. So have I bought the wrong main repeater and is what I am trying to do even possible? I am ordering some triathlon blinds once this virus lockdown is over so the repeater won't go to waste. thanks in advance Tony edit ok on further reading i see these are two seperate systems but the powr savr's work with both. So am I to assume a powr savr RA2 select driver will appear at some point or is that wishful thinking?

yes mine plays a doorbell wav in all rooms as an announcement when pressed

I couldnt say for certain if that's how it's designed to work, I am presuming the ping command only sends a short burst of pings rather than continious but am guessing like I said previously I have one driver per device , so if that driver comes back offline you know which device it is and can create a device action according to that

how about a looping timer of say 10 seconds running continiously , with a ping everytime it resets? have one ping driver for each device if device offline / powercycle device

I use this to check if SKY (UK) box is asleep when it is selected as a source. if device is offline then power on I have one ping driver for each sky box and created a macro for each that is triggered when sky 1 or 2 is selected. in device actions , command tab, device specific command, then put IP address in box and drag across

even odder it seems likt this only happens when i connect to my dedicated spotify connect, my wife's has all functionality

I noticed that if you connect directly from the spotify IOS app to a C4 spotify connect then you have the skip forward, back, pause buttons on display in the C4 app or a T3 if you save a spotify preset in IOS or on a T3 and launch it from there then you don't is there any way of changing this? i'm installing a number of T3's and wanted to avoid having to use a phone to control spotify where I can

cheap way to add more streams is to buy a 2nd hand HC800

WTB C4-RWB57C-P plastic retrofit T3 Back boxes looking for 3 of these UK based

got some but will be looking for some more shortly

having similar problems with android tablets too since OS3 , is there a known issue with them too?

thanks I had omitted connecting the heos stereo out to the Denon Heos Input, that was part of the problem the other part is I hadn't set the Heos driver to auto connect to the gym doh works perfectly now thanks

I have a Denon AVR2500H that I have put in our gym . it seems to integrate really well but I tried to programme a room off button and run into problems If I use spotify connect on the Denon it turns on ok but C4 doesn't register as it being on, so when I use the room off button it doesn't turn off and the volume buttons I programmed do not alter the volume. If I use spotify connect from my HC 800 it works fine, but there seems to be a noticeable drop in audio quality when streaming from the HC -800, perhaps the D-A converters aren't as good, so i'd like to stream from the Denon if possible can anybody suggest any solutions? thanks Tony

thanks for the info guys

are people using the battery Q motion's or the powered ones. & are they reasonably priced & how do they integrate with C4?? looking at them my self

3 of my remotes same problem LED dimming badly

Need a few Square config keypads both wired & wireless Based in UK thanks