C4loso

You just need the Qolysis panel.. and the control is via IP. Sent from my iPhone using Tapatalk

Yes I have my panel integrated. From control4, you can see and change the state of the alarm. You can also see the states of the sensors or it shows you which sensors are in the open position. In terms of what you can do programming wise, you can set it to send you a notification if the alarm is on. this weekend I’m going to try and use one of the motion sensors to program that if it senses motion to turn of a few lights. Will let you know how this works but it should be ok. Honestly don’t know how much more they can give for integration. Sent from my iPhone using Tapatalk

Follow this https://support.apple.com/en-au/HT207057 in order to setup the AppleTV in HomeKit or set it as a home hub. Then after go on your phone > Control4 app > Settings > Apple TV Control > Enable Control ON Hopefully that works. If not you might need to reboot your controller for the setting to take effect. If that doesn’t work, you probably need to reach out to your dealer and have him take a look at the settings. Just tell him you’ve added the Apple TV to HomeKit and that you do see the controller in HomeKit. Hope that helps and good luck Sent from my iPhone using Tapatalk

For anyone who’s interested. The fix was simple after all. I changed my Apple TV’s from manual IP on the Apple TV to automatic in network settings. I did my reservations on my network controller (Ubiquiti). Thanks for all the help. Sent from my iPhone using Tapatalk

Thanks for that, I realised I hadn’t binded the audio volume in the room hence it wasn’t working. Sent from my iPhone using Tapatalk

Hoping to get the intent strings Kodi if someone has it? The one I have doesn’t directly launch Kodi, it just takes it to the Nvidia shield home page. Same as Netflix. Sent from my iPhone using Tapatalk

I haven’t done this before so not sure how it goes but I’m looking for a remote programmer to comb over my system and fix some issues I’m having. System: 2 video zones, 5 audio zones, cameras, hvac, alarm. Issues: 1. Mini apps on Nvidia shield don’t work as intended - from a different source you have to press Kodi/Netflix 2 times for it to load into Netflix. 1 press takes you to Nvidia home page and the second loads Kodi. This is through the chowmain driver and IRUSB. 2. Apple TV has a weird glitch in which it acts as if the remote is being continually being pressed and keeps scrolling. Using the official IP driver. Sent from my iPhone using Tapatalk

I meant if I disconnect the Ethernet and connect via WiFi with a manual IP address the Neeo remote doesn’t work. I’ll try removing the driver and starting afresh. Sent from my iPhone using Tapatalk

Yeah it works perfectly even the remote on my iPhone works too. Sent from my iPhone using Tapatalk

That actually the weird part the light isn’t flickering and when the light does flicker the Apple TV stops scrolling. The port is a non Poe port already. I tried putting the Apple TV on wifi but then the remote doesn’t work so I’m completely stumped. Sent from my iPhone using Tapatalk

I’ve enabled broadcast traffic on the port connected to the EA3. How much pkts/second should I be set? But even with this enabled it’s still not working properly and doing the same thing Sent from my iPhone using Tapatalk

I had auto optimise switched on and supposed that blocks multicast and broadcast. I’ve switched that off now but the Apple TV was still doing the same so I might need to reboot everything tomorrow and let you know how it goes. Sent from my iPhone using Tapatalk

I’ve got a full ubiquiti setup consisting of a USG, Cloudkey and 24port Poe+ switch. The network cable runs direct from the Apple TV into the switch only about 10m. I only have 1 lan and everything is on there. Not sure where the problem could be Sent from my iPhone using Tapatalk

Hoping someone can help me, my dealer is stumped. My Apple TV 4 and 4K are having this weird problem where it’s as if a key on the remote is kept on being pressed. It’s keep flicking and the remote isn’t responsive. Only thing you can do is switch off but then it happens again once you start. My system C4 - EA3 on 3.1.1 Apple TV is on 13.3.1 The driver is on the latest version with control via IP. Any ideas what could be going on? I have 2 Apple TV, one is a 4th gen and the other is 4K one and they are both doing the same thing. The problem was intermittent before but it’s unbearable now. Sent from my iPhone using Tapatalk

Just curious what version of Kodi are you on and what skin are you using? Have you tried press and hold and see what that does. Or try a new skin perhaps arctic zephyr 2 (remember to clear keymap editor to see if it’ll work). Sent from my iPhone using Tapatalk

I think the functionality you want is to bring up the OSD (on screen display) not menu. In which case that is dependent on the Kodi version you are using, the skin and the player you have. For example I have Kodi on an Nvidia Shield and Apple TV. On the Nvidia shield I have Kodi 17.5 using Arctic zephyr 2.0 and the ok button works as you want on in neeo remote in that once the movie starts you press ok it’ll pause the movie and bring up the osd to do play/pause/subtitles/vide/audio etc. On the Apple TV however which in on 17.2 with Arctic zephyr 1 to get the osd to pop up, you have to press ok which pauses the movie then press the up arrow to get the osd. Sent from my iPhone using Tapatalk

Not sure if this will work, but there’s an addon called Keymap Editor. Perhaps download that and then map one of the red/blue/green/yellow buttons to do what you want? Sent from my iPhone using Tapatalk

Yeah I can’t load Netflix and Kodi. - I’m on Nvidia Shield FW - 8.0.2(32.5.205.105). - Control4- 3.1 I just checked now and it seems if I’m on another source e.g Apple TV and press the Kodi button it takes me to Nvidia shield home screen. If I press Kodi again it launched into Kodi. So not sure what’s the problem here. Maybe a setting I need to change on Nvidia side of things? Sent from my iPhone using Tapatalk

I’m on the latest version I’ll think but I’ll check when I get home. Sent from my iPhone using Tapatalk

That’s very interesting. I have the IRUSB running on 2 Nvidia shields and haven’t had any issues apart from the mini apps not working since the last Nvidia shield update Sent from my iPhone using Tapatalk

What do you use instead then to control android devices Sent from my iPhone using Tapatalk

I have composer HE. My question is, is there any way to update the drivers. I can see on my system at the bottom, it says 31 drivers to be updated but for the life of me couldn’t find out how. Any suggestions would be greatly appreciated Sent from my iPhone using Tapatalk

I’d check and make sure it’s corrected added to your system. Remove the T3 and add via sddp. From your description it sounds like, the T3 is switching on but it’s not connected to the system. Sent from my iPhone using Tapatalk

I was having the same issues. - remove the communication agent - remove the T3 from the project - refresh navigators - add the T3 via sddp - refresh navigators - add communication agent - refresh navigators You should be good to go after that Sent from my iPhone using Tapatalk

Thanks for setting me on the right path. I was deleting the communications agent and then not refreshing the navigators. Anyways got it to work now and for future reference this is what I did: 1. Deleted the communication agent - refreshed navigator 2. Deleted the T3 from the project - refreshed navigator 3. Added the T3 via sddp (was doing manual before so this could’ve been the trick) 4. Added the communication agent 5. Refreshed the Navigators Sent from my iPhone using Tapatalk