Rob21

Thank you that’s great to hear. I don’t have any Hayward equipment yet but can you explain what you mean by “pool chemistry”? Also, what is a SWCG?

I have 7 T3 touch screens for sale. All 10 inch in white. PM with offers.

PM sent

Any input on the omnilogic driver? Is it cloud based?

To tell you the truth I would not be surprised if that were the case. I have two main issues. (1) My shades do not operate properly with the original Lutron qs shades driver. The shades operate fine if I control them through Lutron but when I attempt to control them in C4 it can be very finicky. Sometimes it takes multiple inputs for the shades to start moving, if the shade is closed and I drag the slider to 100% open it often stops at 99% instead of 100%, etc. (2) My fans do not track properly in C4. For example if I drag the fan slider to a medium speed it will set the fan to that speed but when I leave the page with the fan speed on whatever device I’m using and go back to it the fan slider reads that it is off. In order to actually turn the fan off I need to move the slider to one of the on positions and then move it back to off without leaving that page. I hope that all makes sense. I appreciate all input/help.

My C4 system currently uses Lutron QS for lighting, fans, and shades. The lighting is pretty much rock solid but unfortunately the fan and shade integration is terrible. The fans and shades are controlled with QS wireless. I believe that the homeworks QS shade integration is known to be problematic but I am wondering if anyone has any input on integration with homeworks QSX. If homeworks QSX offers solid integration for shades and fans then I would definitely consider upgrading. Any input is appreciated!

I’m still struggling with this myself. Can someone sum up this programming logic please.

Interesting I haven't really thought about the controller possibly being my problem. I attached two video of one of my T3's being slow (sorry about the fingerprints). Do you think a CA10 would fix this? What could explain my T3s becoming fast temporally after power cycling them? https://drive.google.com/file/d/1KXmA1EqQ-H7G-VhoeZyaSEPlIQtpF_mg/view?usp=sharing https://drive.google.com/file/d/1WTgqi38ur8nzNXiGWf8CPCjKpj4ScNx6/view?usp=sharing Thanks again to everyone helping

Reviving this thread because I have learned a few things since I last posted. The T3's in my house are still slow. My entire system is on 3.2.4. I have: 1 Ea5 4 Ea1s 1 Ca1 7 T3's (all wired) and today I just had 1 T4 installed (wired) I believe that all of the touch screens are connected directly to the first switch from the router. My router is an Araknis AN-310-RT-4L2W and the first switch from the router is an Araknis AN-‌310-‌SW-‌24-‌POE. I have no obvious issues with my network. Each T3's IP address is reserved. Power cycling the T3s make them fast again but over time (about a day or two) they slow down again. Any help is greatly appreciated!

Thanks everyone. If its not under warrantee I’ll consider taking it apart on my own and trying to fix it.

This is seriously the best news I’ve heard on the forum. Please keep us in the loop. Thank you!

Please let us know how the integration or contacting Carrier goes. Thank you!

Can anyone comment of the best current integration between infinity and C4? I’ve asked for this is the past and I know that there are very few people with the integration in the first place but I do believe that the integration with the SAM module works to some extent. Any help is greatly appreciated!

Agreed with the variable speed and the regret of purchasing the system. I’m pretty sure we would lose system alerts since the T-stats are what is actually connected to the network.

Same here but even if we can rig that up correctly we lose carrier infinity features such as the variable speed fan and the system alerts. The worst part is how carrier offers eco bee thermostats for their regular line (not the infinity series) and eco bee integrates well with Control4. It’s really unfortunate that we don’t have any sort of solution.

This Araknis AN-310-SW-R-16-PoE has been making a loud noise and vibration for months now. I am assuming that this is simply the fan acting up but something definitely seems wrong. The temperature in the room is fine. I have power cycled the switch multiple times but the problem persists. Could something like this cause network issues? I have been trying to track down a problem regarding the T3’s on this network slowing down over time (very strange problem). I have attached a video of the switch below. All help is greatly appreciated! https://drive.google.com/file/d/1nRWr09F0URr2C8kWyOsDJ8swbDuZOy4T/view?usp=drivesdk

I have run into the same issue as @Charlie Mackenzie but with an anthem receiver. Any help would be greatly appreciated!

I updated to 3.2.3. My alignment issue was also corrected.

Wow this is great. Thank you!

I have the same issue. I noticed it a week or two ago. It’s obviously a minor issue but very annoying to have to look at.

I finally had enough of the august integration a while ago and switched to zigbee. Haven’t had an issue since.

The only thing keeping me from switching to the zigbee module is Auto Unlock. I’ve been trying to find an alternative that would work with the zigbee module but I haven’t found anything. Open to any ideas!

I contacted the driver central help desk (thanks for the idea @msgreenf). They got back to me in less than an hour and sent me the latest unreleased version for the driver. I was on version 2007 and they sent me version 2009. Problem solved!

My august lock integration is "broken" again. The lock status does not change in control4 so C4 thinks that it its always locked. When I try to unlock it from C4 the lock does unlock but C4 still shows that it is locked (because of this C4 only sends the unlock command and I can't send the lock command). This has happened to me in the past and it usually fixes itself after a couple of days but I am wondering if anyone else has experienced something like this.

I know this doesn’t really help but I just wanted to add that I’ve had the same problem just with Pandora in the past. I’ve also looked through all of the forums when I was having the problem and I was in the same spot as you. I haven’t had the problem in a few months now and my guess is a software update fixed it.