dentalben Posted May 12, 2015 Share Posted May 12, 2015 Anyone have a source for BenQ projector drivers? All I see in Composer is for the W10000 which is 7 years post-production. Probably still compatible with IR codes, but I'd like to have at least a somewhat newer driver. Quote Link to comment Share on other sites More sharing options...
alanchow Posted May 12, 2015 Share Posted May 12, 2015 Here is a quick one way RS232 driver i made up for the BenQ W1070/W1080ST projector. It may work with other models but i have not tested it. vstar 1 Quote Link to comment Share on other sites More sharing options...
Gary Leeds UK Posted May 13, 2015 Share Posted May 13, 2015 Posted a ir driver in downloads Quote Link to comment Share on other sites More sharing options...
dentalben Posted May 14, 2015 Author Share Posted May 14, 2015 Thx! Quote Link to comment Share on other sites More sharing options...
vstar Posted January 19, 2016 Share Posted January 19, 2016 On 5/12/2015 at 6:35 PM, alanchow said: Here is a quick one way RS232 driver i made up for the BenQ W1070/W1080ST projector. It may work with other models but i have not tested it. Thank you very much for this Alan, picked up a w1070 last week and this driver works like a charm. my only mistake and it was totally my fault was i changed the default baud rate on the projector when i was doing initial projector setup prior to my control4 integration thinking 9600 was more common for drivers and of course the driver could not communicate so i put it back to 11520 and it immediately started working. Thanks again. Quote Link to comment Share on other sites More sharing options...
alanchow Posted January 20, 2016 Share Posted January 20, 2016 4 hours ago, vstar said: Thank you very much for this Alan, picked up a w1070 last week and this driver works like a charm. my only mistake and it was totally my fault was i changed the default baud rate on the projector when i was doing initial projector setup prior to my control4 integration thinking 9600 was more common for drivers and of course the driver could not communicate so i put it back to 11520 and it immediately started working. Thanks again. No problems. Driver only took a few minutes for me to create. Quote Link to comment Share on other sites More sharing options...
Alt Posted September 8, 2016 Share Posted September 8, 2016 Confirmed working on a new BenQ HT2050. Thanks Alan Btw to point out Pins 2 and 3 are reversed on the DB9 connection to the projector. vstar 1 Quote Link to comment Share on other sites More sharing options...
alanchow Posted September 8, 2016 Share Posted September 8, 2016 2 hours ago, Alt said: Confirmed working on a new BenQ HT2050. Thanks Alan Btw to point out Pins 2 and 3 are reversed on the DB9 connection to the projector. No problems. Quote Link to comment Share on other sites More sharing options...
Harmeet Brar Posted July 6, 2017 Share Posted July 6, 2017 Hey guys, I have a Db9 Cable connected to the HT2050 Projector into serial 1 on my HC-800 do i need to reverse the Pin layout for 2 and 3? i also only have a Baud rate option of 115200 not 11520. any help would be great. Thanks! Quote Link to comment Share on other sites More sharing options...
Unickow Posted December 29, 2019 Share Posted December 29, 2019 Is there a driver for the Benq HT 3550? Quote Link to comment Share on other sites More sharing options...
msgreenf Posted December 29, 2019 Share Posted December 29, 2019 Look at the chowmain PJ link driver Unickow 1 Quote Link to comment Share on other sites More sharing options...
alanchow Posted December 29, 2019 Share Posted December 29, 2019 12 minutes ago, Unickow said: Is there a driver for the Benq HT 3550? https://chowmain.squarespace.com/benq-control4 Unickow 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.