pdapice Posted September 26, 2020 Share Posted September 26, 2020 Lutron recently increased their device limit to 75, does anyone know when the driver for control4 will be updated to reflect this change? composer is only showing 50 possible devices that i can link Quote Link to comment Share on other sites More sharing options...
chopedogg88 Posted September 26, 2020 Share Posted September 26, 2020 you can use the RA2 Select bridge driver, works just fine and has more connections. there are also new LEAP drivers or Caseta and RA2 Select, those are nice because they can automatically scan the bridge and import all the devices with a single button click. Time2Jet 1 Quote Link to comment Share on other sites More sharing options...
Time2Jet Posted September 26, 2020 Share Posted September 26, 2020 Lutron recently increased their device limit to 75, does anyone know when the driver for control4 will be updated to reflect this change? composer is only showing 50 possible devices that i can linkUse the RA2 driver. I had the same issue. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Time2Jet Posted September 26, 2020 Share Posted September 26, 2020 Use the RA2 driver. I had the same issue. Sent from my iPhone using TapatalkYou’ll have to ID the ones over 50 to the RA2 driver or start from scratch with the RA2. Pain, but worth having all associated with the RA2. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
pdapice Posted September 26, 2020 Author Share Posted September 26, 2020 checking the leap driver out now, looks pretty good, thanks! Â Quote Link to comment Share on other sites More sharing options...
Time2Jet Posted September 26, 2020 Share Posted September 26, 2020 you can use the RA2 Select bridge driver, works just fine and has more connections. there are also new LEAP drivers or Caseta and RA2 Select, those are nice because they can automatically scan the bridge and import all the devices with a single button click.Sorry, didn see your post before I posted. Wasn’t aware of the LEAP drivers, I have to check them out also. Good deal, sounds like a no brainer. I struggled with the issue never realizing I could use the RA2 Select. What about native Lutron Scenes? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
chopedogg88 Posted September 26, 2020 Share Posted September 26, 2020 the LEAP driver allows you to pull in scenes and areas as well. The big issue I hit with the LEAP driver is that there is a (known) bug that they are fixing in a future release (date TBD...), where if you have more than one bridge causes problems...they keep needing to be re-paired every day or so. Which sucks. Quote Link to comment Share on other sites More sharing options...
dinom Posted September 27, 2020 Share Posted September 27, 2020 Does the LEAP driver work with the standard RadioRA 2? Quote Link to comment Share on other sites More sharing options...
chopedogg88 Posted September 27, 2020 Share Posted September 27, 2020 Not currently. Sent from my SM-G986U using Tapatalk Quote Link to comment Share on other sites More sharing options...
pdapice Posted September 27, 2020 Author Share Posted September 27, 2020 seems like my caseta pro isn't fully compatible with the leap driver. it did not add any of my pico remotes and there is no "add keypads" button in the driver page to add them. i tried adding one manually but that didn't work either Quote Link to comment Share on other sites More sharing options...
chopedogg88 Posted September 27, 2020 Share Posted September 27, 2020 yeah I don't think there is an option for adding keypads automatically. its not your caseta pro, its everyone's. Quote Link to comment Share on other sites More sharing options...
evil0ne Posted September 28, 2020 Share Posted September 28, 2020 Thanks for the heads up on the LEAP driver. For the scene control alone I think I’ll make the switch from the Caseta Brjidge driver. Quote Link to comment Share on other sites More sharing options...
htjunkie Posted September 29, 2020 Share Posted September 29, 2020 I run into the same issue where my client has more than 50 Caseta devices! I tried loading the RadioRA2 Repeater driver but I can't get it to talk to the Caseta Pro hub, I tried using lutron/integtration for telnet login but no go. Do I have the wrong driver? Quote Link to comment Share on other sites More sharing options...
indecision Posted September 29, 2020 Share Posted September 29, 2020 I used the LEAP drivers last week for a Caseta integration and they were great. However it pulled in the Lutron scenes but won't add them to the lighting scenes page. Tech support told me it is a limitation of the driver. I recreated the Lutron scenes within C4 so it was fine, just more work. Has your experience been the same? Quote Link to comment Share on other sites More sharing options...
chopedogg88 Posted September 29, 2020 Share Posted September 29, 2020 14 minutes ago, htjunkie said: I run into the same issue where my client has more than 50 Caseta devices! I tried loading the RadioRA2 Repeater driver but I can't get it to talk to the Caseta Pro hub, I tried using lutron/integtration for telnet login but no go. Do I have the wrong driver? Yes you need to use the RA2 Select driver. Or the LEAP driver. Not the regular RA2 repeater driver. Quote Link to comment Share on other sites More sharing options...
htjunkie Posted September 29, 2020 Share Posted September 29, 2020 Thank you so much, got RA2 Select driver installed and it's working fine! Quote Link to comment Share on other sites More sharing options...
kimnezor Posted October 10, 2020 Share Posted October 10, 2020 Does anyone know if Control4 has a dedicated driver for the Caseta Fan Control (Lutron PD-FSQN-WH)? I am currently using the Caseta Dimmer driver in composer, and it works fine; however, the device shows up as a light in the app and instead of having Low, Medium, Medium High, and High switch positions, has the usual 0-100 light scale. Perhaps there is a workaround that allows to use the dimmer driver but display it differently in the UI? Â Thank you for your help! Update: looked through older posts and saw people using the RA Select Driver. It works. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.