alanchow Posted March 9, 2023 Share Posted March 9, 2023 Overview WiZ Connected is an Internet of Things software solution provider focused on delivering easy-to-use, Wi-Fi-based smart lighting. Owned by Signify, the world leader in lighting, WiZ serves both consumer and professional markets in more than 70 countries. Learn more about WiZ Connected and how their innovative, connected lighting solutions make daily life easier at https://wizconnected.com. Compatible Wiz Connected devices are sold under many brands including: WiZ Atom Lighting ATX LED Brilliant Designers Fountain Evoluziona Fischer & Honsel Gauss iDual KSR Laurie Lumiere Lednify Leyton Liteline Lutec Philips Smart LED lights (WiZ Connected) Spex SLV Driver Features One-Click Auto Detection and Setup of Devices Dedicated Agent for self-healing and central configuration Outlet Driver Customisable Experience button with a wide variety of options and outlet regions Control both lights and outlets Dedicated Button links for on/off/toggle Relay for connection to other experience buttons or drivers Auto-detection of device specifications Commands, events and variables available for advanced programming Light Driver (Requires OS 3.3.2 or later) Native Color Wheel for CCT and RGB Control both lights and outlets Set Light Direction/Ratio (Supported Lights only) Support for Dynamic Light Scenes Two way control/feedback. Graphical White Temperature Selection (V2 / OS 3.3+ Required) Automatically configure driver capabilities based on model detection. Change RGB color via navigator Change Brightness via navigator Change Color temperature via navigator Advanced Lighting Scene Support FAQ Where can i find out more about WiZ? You can find out more about WiZ products via the WiZ website https://www.wizconnected.com/en-us Is Internet Required to use this driver? This driver uses local LAN for both discovery, state and control. Internet is not required. What brands are supported? Compatible Wiz Connected devices are sold under many brands including: WiZ Atom Lighting ATX LED Brilliant Designers Fountain Evoluziona Fischer & Honsel Gauss iDual KSR Laurie Lumiere Lednify Leyton Liteline Lutec Philips Smart LED lights (WiZ Connected) Spex SLV I'm unable to find the WiZ agent? The WiZ Agent Driver can be added and located under the Agents tab in Composer (not under the normal drivers section) Composer Express does not support configuration of agents, and will not allow WiZ Agent to be added Auto-Setup is not operating correctly Ensure you are running OS 3.3.2 or later. Can this driver get the names of devices in the app automatically? Unfortunately, the local API is not able to fetch the names used in the app. This is a limitation of the local protocol I want to try this driver out before buying it? All Chowmain drivers for Control4 come with a 90 day trial. How do I find out more information about the driver? Please see the links below for more information about the driver. Driver Link Andrew luecke 1 Quote Link to comment Share on other sites More sharing options...
RAV Posted March 9, 2023 Share Posted March 9, 2023 Just confirming, only NON light bulb device currently is the plug in outlet. Not compatible with their wall dimmer, motion sensor, cute button or remote? (like that it's not cloud reliant!) Quote Link to comment Share on other sites More sharing options...
alanchow Posted March 9, 2023 Author Share Posted March 9, 2023 3 hours ago, RAV said: Just confirming, only NON light bulb device currently is the plug in outlet. Not compatible with their wall dimmer, motion sensor, cute button or remote? (like that it's not cloud reliant!) Wall dimmer should work as a light. We haven't tested this but am basing it off the API specs Quote Link to comment Share on other sites More sharing options...
Andrew luecke Posted March 23, 2023 Share Posted March 23, 2023 Hey guys. Just 2 things: 1. We released a new update today which fixes a bug with the CCT setting via properties (if you were having trouble) 2. If you require grouping of lights, we have released https://chowmain.software/drivers/control4-chowmain-light-group which you can now use to group the lights (and its designed to be generic, so you can even group Wiz with Shelly, or TPLink, or even Hue). Quote Link to comment Share on other sites More sharing options...
dw886 Posted March 31, 2023 Share Posted March 31, 2023 If you use a WiZ trim (like the Halo WiZ) behind a standard Control4 Keypad Dimmer, does this mess everything up as the power to the trims is being cut / restored when the light switch is turned off/on? We have a customer that is looking for some tunable trims to replace the existing trims outside so they can control the color for different holidays. Quote Link to comment Share on other sites More sharing options...
Andrew luecke Posted October 16, 2023 Share Posted October 16, 2023 Good news guys. New Wiz Driver has been released (and is a major update). Make sure you reboot your controller after updating, as the driver adds a lot of new major functionality including: 1. Support for all preset Color features such as Color-Fade/Dim-To-Warm on dimming, Previous-On and Preset 2. Improved support for Configurable Keypads and Keypad LED colors 3. Major Performance improvements 4. Better auto-detection of CCT (to use, set Light Type to Auto-Detect) And a heap of other new features Quote Link to comment Share on other sites More sharing options...
Andrew luecke Posted January 17 Share Posted January 17 G'day, A new Update has been released today, which should improve a few things. Still working on updates to the other drivers (sorry for the delays) Quote Link to comment Share on other sites More sharing options...
Andrew luecke Posted February 19 Share Posted February 19 G'day Guys, We've pushed an updated driver today for this as well as Shelly and Govee 1. Even more performance works to reduce system latency overall. Especially with Debugging enabled, worst-case benchmarks showed a CPU processing time drop from 6.6s to 0.06s for 10000 log entries (28x-100x speedup). Other benchmarks showed a 9-22ms improvement for certain operations (which in some circumstances may have appeared to be a random CPU spike every so often). Either way, even lower end controllers should operate better now 2. Scenes will work correctly now on CCT Only Wiz lights (in this case, there were no reports, but a few people using certain lights were reporting some random issues that maybe related) 3. You can now see diagnostics for ALL Wiz drivers in one click 4. Huge new Diagnostics tools, which not only identify more potential issues with our drivers, but, also if your Control4 Controller might be experiencing certain issues 5. Improvements to commands to improve light latency. This only affects some people however Andy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.