Jump to content
C4 Forums | Control4

brucecampbell

c4Forums Member
  • Posts

    962
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by brucecampbell

  1. Please explain the best way to work out what transformer will suit this kind of install. I will run 4 x PX24500 decoders (which are stated as 12-24VDC 15A max) 3 decoders will each run a 6-7W pool light, the other decoder will run 1200mm or LED strip light How do we determine the best size transformer? I assume 1 transformer for all 4 decoders is viable? Is it all based on the load from the lights, or does the decoder have to be factored in too? Thanks
  2. Will this 4 conductor cable be suitable for my application? http://www.dynamix.co.nz/productimages/pdfs/cs4cx.pdf I will run a single LED pool light per cable. The cable runs will be approx 30 mtrs from the DMX decoder I believe the Pool lights are 3.5W The DMX decoders will be: This one Cheers.
  3. Great, thanks for the advice, I hadn't even considered the decoder inside, had it stuck in my head that I'd be running cat cable... Another question: What limitations are there with connecting multiple LED's to one decoder. - can they simply be chained together using 18/4 wire? ie: (my plan): One decoder running the strip under the water fall. One decoder running 2-3 LED spots shining up into the trees.
  4. Please excuse my ignorance on this subject, but I'm looking at LED strip lighting for my pool area, in particular to light up a waterfall and have no experience with this type of lighting. I have a few questions I am hoping you guys can help with. Please confirm/comment on the following: 1. DMX controller will sit in my rack plugged into the HC800 via RS232 ? 2. Controller will connect to 1st decoder via a DMX to RJ45 cable ? 2a. I am assuming runs of cat6 cable from the DMX controller to the DMX decoder can be reasonably long ie: 50-60 mtrs will be no issue ? 2b. 2nd decoder will be daisy chained to 1st decoder, and so on... 3. Decoder will be mounted close to the LED strip outdoors, most likely in a weather proof enclosure ? 4. DMX controller, via C4 interface, will be able to control each DMX decoder independently ? Cheers.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.