jillmark99

I got one. Thanks to all that messaged me. 

I’m looking for a used T3 tabletop touchscreen. Would like to buy from a Canadian seller to avoid currency exchange and import fees. If you have one for sale for a good price please pm me. Thanks. 

Thanks Amr. Appreciate the reply. 

I’ve been running 2.9.1 on my system for quite a few years and it’s been rock solid. The time has come for me to upgrade and I am wondering the correct path. I was thinking the following. Please correct me if this is incorrect or if I can safely jump one or two.

2.9.1 to 2.10.6 to 3.0 to 3.1.3 to 3.2.4 and finally to 3.3.2

8 hours ago, Amr said:

The full 16 channel are available for u starting from the parent channel 1 till 2-16 child channels, of course this is for the 16 channels driver, there are other separate drivers each corresponds to a channel number, I didn’t use these drivers as I believe I had an issue using them!

I stand corrected. I didn’t think the top one was for all blinds. Once I expanded it I just figured the driver only did 2-16 and the top was just identifying it as a group similar to a room. 

I’ve never had the option of blind 1 in composer. Only 2-16 are available to me. 
 

Did you make the proper connections on the connections tab in composer? Do you have the correct cable going from your Control4 controller to the URTSI? 

Where it says blinds 2, blinds 3, blinds 4, etc those are referring to the Chanel’s on the URTSI. Keep in mind there is no number 1. Number 1 is where you keep the selector switch on the URTSI when it’s in normal operating mode. 
move the selector switch around one at a time on the URTSI and use the open or close bottom on the device to confirm what channel works a particular shade. Once you have identified them all turn the dial back to 1. Then go into composer and label the respective blind the correct name. Then you now know which one to program from. 
I have the URTSI in my system as well and it works very well and simple to program in composer once setup. 
hope this helps. 

Thanks for the replies guys. I ordered one from Amazon the other day that includes the correct adapter. Should be here tomorrow. 

I found the size of the transformer end that I require. 

Hello

I’m looking for a power supply for an HC-800 but I don’t know the size of the plug end. Anyone have a link to a universal one on Amazon? 
I have several HC-800’s in my system but I don’t know the proper way to measure or tell the end type. 
help is appreciated. 
thanks 

Found one for a very reasonable price. @time2jethooked me up. Smooth transaction. Thanks. 

On 11/16/2022 at 11:45 AM, rea said:

To do this with IFTTT, I have it set up so that each person you want to "track" in your household has a separate IFTTT account and then you would need a separate iteration of the driver in your C4 project (can add as many as you want with your license). Then you would set up variables for each user and use those to allow C4 to determine if everyone is gone/at home or only a selected person. Once you have that done, you can basically program anything you want off the variables.  

This is what I do at my place. Works well. Been using this for quite a while with very minimal issues. 

Not working for me either. Running 2.9.1. 

I’m looking for an IRUSB setup for a FireTV cube. Wondering if someone has one they are no longer using. I would prefer one that includes the micro usb and the adapter for the Ethernet but I can always buy those pieces separate on Amazon if needed. 
I would buy the IRUBS from videostorm but the freight is the same price as the device. I know it could be put in an envelope and sent for a couple dollars postage.
mid you have one you don’t need please PM me. Thanks 

I’m thinking of updating my trusty HC-800 to an EA-5 if I can find one for a good price. 
If you have one for sale please PM me pricing. Thanks 

PM sent 

2 hours ago, ILoveC4 said:

Yeah, I'd love to know as well. I don't have a consistent enough schedule where I can use Tesla's in built scheduling stuff, but live in Utah where it gets really hot and really cold...even in my garage.

I have touchpanels on my desk and nightstand that I'd love to use instead of getting out my phone, unlocking, opening the Tesla app, etc...

Me too (except I don’t live in Utah). 
Hoping when (if) they do release it that it works on 2.9.1. The last release didn’t. 

On 3/1/2022 at 7:40 AM, IntrinsicGroup said:

Not as yet I'm afraid, there one driver ahead of it in the queue and once that's updated we'll be able to look at Tesla again.

Apologies for the delay.

 

Any updates on this driver? Or has it been put on the back burner? 

On 3/1/2022 at 7:40 AM, IntrinsicGroup said:

Not as yet I'm afraid, there one driver ahead of it in the queue and once that's updated we'll be able to look at Tesla again.

Apologies for the delay.

 

@IntrinsicGroupany further updates on timeline for this? 

7 hours ago, ILoveC4 said:

I can’t imagine it would be constantly aware of the location…just get the Tesla garage door opener. I forgot 3 and Y have to add them manually. They came from the factory in our cars and they’re brilliant. 

I second this. Just go with the Tesla homelink to automatically open/close garage doors with geofencing. It’s rock solid and works every time.

@IntrinsicGroup any updates on a timeline for the Tesla driver? 

@IntrinsicGroup when you update the driver any chance it will work with 2.9.1? 

On 12/8/2021 at 7:44 AM, IntrinsicGroup said:

We're updating the driver so have temporarily removed it from sale. We'll let you know once it's back on the site. Apologies for the inconvenience.

Since you are updating the driver can you also please update it so it will work with 2.9.1 systems? The current driver does not work with 2.9.1. 
thanks 

Thanks @msgreenf and @DanITmanfor your replies. Someone from Canada has reached out and has a couple. If it doesn’t work out I will connect with you guys.