thedriverslab

In Australia Wemos are rated to 240v 10amps so i wouldn't put it on an oven.  10 amps is good for most things.  For examples my wife has a hair curling iron that she loves that i am paranoid will burn down the house one day.  So i have a wemo that automatically power cycles it after 15 minutes of use resetting it to the default standby mode so its ready to use again.
Wife doesn't even notice i've done it which is the best part.

MWiz is happy to announce the release of Satel Integra Security System Driver.
Satel Integra driver enables integration of Control4 system with Satel Integra security system. It uses network connection to communicate with Satel Integra security system through ETHM-1 Plus integration module.
Security system can be monitored and controlled through Control4 programming and through Control4 GUI devices using new version of Control4 Security User Interface (introduced in OS 2.8).
Security system outputs can also be controlled using Control4 Lights User Interface with Satel Integra Light Widget driver.

The following Satel Integra models are supported:
INTEGRA 24 INTEGRA 32 INTEGRA 64 INTEGRA 128 INTEGRA 128-WRLSIM300 INTEGRA 128-WRLLEON INTEGRA 64 PLUS INTEGRA 128 PLUS INTEGRA 256 PLUS  
DRIVER FEATURES
 
arming/disarming in different modes (home, away) monitoring partitions status (arm mode, alarms) monitoring inputs, zones and outputs status controlling outputs You can find more information about this driver and about all our products on our website: www.mwiz.pl
You can contact us at info@mwiz.pl

We have two Phillip Hue Sensors and came across this driver 
https://www.unilogiq.com/en/control4-drivers
You need to add 2.10+ Temp Display Driver and the Generic C4  Sensor along with above gateway and you will have 
Full working C4 Sensor. 
Well done Bogby 

BTW, the Security Light driver literally is getting better every day...
A new version (Version 31) was released to the online database last week.
Here are the changes listed in the documentation:
* Fixed bug where timer was not being cleared when security function was disabled.
* Changed to start timer on *motion no longer sensed*, turn on lights on both sensed and no longer sensed.  For short timeouts (i.e. turn this hallway light on for 30 seconds), it doesn't work due to motion continuously being sensed.
* Event names and descriptions were updated to be more consistent with when events will fire (Motion Sensed -> Lights Triggered, Motion Stopped -> Lights Restored).
* Added 'ENABLED' variable, which can be used to determine whether the driver will turn on / off lights on motion changes.
* Added 'Set Light Level' command, which allows programming to change the light level the motion will set lights to (useful for day/night programming).
Cheers,
RyanE

Sally:
I have asked our business dev team to reach out to Pentair regarding a driver for the ScreenLogin.

That sounds really great! Will there be more functionality on this than with the current drivers?
Any idea when the IntelliCenter will be available?

It would be interesting to see what Intellicenter brings. I agree that right now, ScreenLogic is really all your need. I have connected my Intellitouch i7 to Control4. It is expensive to do for a sub-par experience. Those pool companies are very much behind in terms of software development. They use Serial/9.6 protocols to communicate and the data is very limited. ScreenLogic is "unexpectedly ok" based on old those techs are. 
I look forward to this new Intellicenter and even more what the driverslab can create for us Control4 users. In the meantime, don't waste your money on trying to interface the legacy Intellitouch with Control4. And if you can't wait for Intellicenter, go the cheaper Easytouch - it is all you need with ScreenLogic. It will save you a lot of money that can be spent with our great remote dealers on this forum!!!

Yes, the new driver will have additional functionality as there are more parameters to pull compared to the current system. We will be adding additional features to our current driver, unfortunately we need to finish our development cycle before we can go back to our current driver. 
As for when it will be available, we will have to wait and see as it is Pentairs call.

Pentair

This driver would be very useful. I played around with a prototype for lighting control over HomeKit myself. I have both an echo and several apple products in my system and think both would be useful. Sometimes you are near the echo which is very easy to use hands free. Sometimes you are away from the echo or even out of the house so HomeKit would be a great solution. 

*EVERY* video game console *EVER* made?
I don't think so.  You don't even have VirtualBoy, or Apple's failed Pippen.
Not that it matters, but that's a pretty bold claim.

RyanE
 
P.S.  Here's another 15 you don't have and probably don't need to add: http://www.pcauthority.com.au/Gallery/271730,top-15-obscure-video-game-consoles-for-collectors.aspx/
 

I'm pleased to announce that the production version of the Varietas Software Homebridge Driver is ready for download and is now listed at HouseLogix here.  
A sincere thank you to all my beta testers and folks who have helped me test out support for various devices.  The Homebridge Network Appliance is also ready for production.  For anyone that wants to buy the ready-made device, please feel free to PM me.

Greenfield Solutions has worked with Reolink to release a driver for Reolink's innovative line of Cameras.  Reolink has an innovative all battery powered WiFi camera which I believe will be the first battery powered camera to allow for integration for Control4!  The Reolink Keen - https://reolink.com/product/keen/
In addition this driver will work with all Reolink cameras.
The driver will be released in the next few days! Just final testing and tweaks.  Waiting for some API feedback on motion detection.
 
 

coming soon.....

coming soon.....