SpencerT

1 hour ago, CTMatthew said:

As long as you don't bedazzle too close to the base you should still be able to dock it.

LOL! 

No offense, but I'd strongly reconsider this project if you're hunting for the "MAC iD chip" and believe that a surge protector should have prevented any kind of power related failure to the unit. 

Out of curiosity, why swap the boards? Can't you restore a backup to the new ca1 once it's online and keep your warranty?

8 hours ago, Dueport said:

I can’t speak to other models that use the Yale Access app, but I can report definitively that, with the Assure 2 locks with C4 zigbee module installed, the app can continue communicating with the lock (you can setup and manage auto lock from the app in this way - as well as a number of settings, lock firmware upgrade, etc) as long as it is in Bluetooth range of the lock.  I believe the Assure 2 has a built in Bluetooth radio which does not deactivate when the C4 module is in there and in this way allows advanced features and lock control through the app. Really like the Yale Assure 2 and C4 module combo - C4 integration remains perfect totally reliable, user management and all C4 features work great!

I stand corrected. That's awesome! I'm on the Yale assure SL's and I can't see them anymore from the app. Very cool feature for the v2! Thanks for clarifying!

1 hour ago, Ryanjackson said:

It is built into the Yale lock. Not through c4. Just wondering if removing the wifi card also disables the auto unlock feature. 

 

Thanks

Ryan

Yes, it disables auto unlock. The Yale app can no longer communicate with the lock. You would have to put together a geo solution for c4. 

Edit - I'm wrong.

2 hours ago, Ryanjackson said:

Do you know how the auto unlock works? Assume it will still work? Bluetooth?

Thanks

Ryan

I don't believe it does since there is no native geofencing in c4.

EDIT - see below, I'm wrong!

I did. You were asking if anyone had issues with neeo on unifi. Someone with a similar setup and MAC has issues while I do not. 

I believe these may actually all be TI chipsets, just different runs of the chips (not entirely positive). 

I'm on the TI chipset neeo (2c:ab:33) running 4 Unifi AP's with zero issues.

Someone in this thread has a TI chipset neeo running Unifi and has issues with the neeo. 

7 minutes ago, penn65000 said:

 Nope. No updates since Oct 2021 apparently:  https://www.control4.com/help/c4/software/rn/dealer-neeo/content/release_notes_neeo_remote/releases.htm

Interesting. I'm on 1.71.3-30626811 which isn't on that list. 

If it's set to the wrong room (a room named "empty"), Hit the list button, then up arrow, then select button, then select the correct room it's supposed to be in. 

What do you see on the screen of the remote? Can you take a picture? 

I think he's asking if you changed it to a room named "empty". Are you able to see any of the other rooms from the remote?

I'm on Android in the US, app 323.3.08. address is already set as US. My account is setup for auto renew at customer.control4.com.

I don't have the option under settings / 4sight for auto renew in the app, have the contact smart home pro button instead. 

I may be the outlier here but the Yale august modules with c4 was a terrible experience for us. Would work for a few days and then lose state (even though everything worked from the August app). Gave up and went with the c4 zb modules on a few of our locks. They work perfectly. 

11 hours ago, homerjohn said:

Not sure what is meant by “bindings “. One note… it was working prior to a router upgrade. But have confirmed the director and matrix are on same subnet and both have network connectivity’s 

If it worked prior to the router swap, and you can manually control it, it sounds like it picked up a different IP address from DHCP. 

Glad it worked!

24 minutes ago, Control4@8293 said:

Is there a new driver to cycle the colors? The light wont even turn on, through C4 because on iAqualink Ap after you turn light on, you need to select the color. Any help is appreciated!

Check in HE to make to make sure that the Aux you've assigned for pool lights isn't setup as a Toggle.  You need to select the option for your lights (i.e. Jandy LED Water colors).  Once you do that, clicking on lights in the app will bring you to a screen where you can select your color (from the default Jandy list). Latest driver is version 23 from 11/1/21.

1 minute ago, gideyup1 said:

@SpencerT  How do I create a DHCP reservation for the processor?  Here is the screenshot where I was able to change the IP to match the Lutron App Network IP.

You will need to create that reservation on your router (or whatever device is handling DHCP requests).  It's not something you will set in C4.

Glad you got it working.  Strongly suggest you create a DHCP reservation for the processor so you don't have to do this again.

1 hour ago, gideyup1 said:

Hi - where do I go in Composer HE to confirm the polling IP and where do I confirm the actual IP assigned to my Lutron Hub?   Bit of a rookie in terms of navigating Composer HE.

Thanks

Look for your Lutron processor on the left (under Monitoring).

Select it and click properties on the upper right.  It should show on the properties tab along with pairing info, online status, etc.

Have you at least confirmed the polling IP in HE is the same as the actual IP assigned to your Lutron hub?

7 hours ago, penn65000 said:

I’ve asked the C4 folks for swap for halo (seems reasonable given they appear to be abandoning their shiny new thing) but they’ve balked. Maybe Savant next time. 

Seems like a solid business plan for C4 / SNAP to give out free remotes and a completely logical reason to go Savant if you don't get one. 

Plop me into the "no connectivity issues with NEEO" camp. I have to wonder if there were different revisions using different chipsets. Seems like everything I read is either it works awesome or it doesn't work at all. 

I'm on ubiquiti, 4 AP's. 

Pick a different channel.

Is the wifi enabled on your bell hub? If so, did you name the Netgear 2.4 network the same?

6 minutes ago, PumpUpVolume said:

Changing to these settings did not work. The NEEO is presenting huge lag with the new settings. Other devices still work fine. Can still stream video from my SkyBell and still get >250MBPS through the WAP to the ISP. All devices work great except the NEEO, which is terrible.

Did you reboot the radio and the neeo?