lax Posted December 3, 2019 Share Posted December 3, 2019 I'd like to display the temperature from my wine cellar on a T3 touch screen (under the comfort menu - sort of like a thermostat). I have a CardAccess WCS10A-2-ZP unit that can sense temperature, but I have no clue how to get it to display on the T3.... I have a Generic Temperature Display Driver installed too. The Temperature Display Driver (OS 2.10+) shows this The CardAccess unit shows these connections So there's no relevant bindings that can be made and I also didn't see anything in programming that could accomplish this. Any ideas? Quote Link to comment Share on other sites More sharing options...
JoelC Posted December 4, 2019 Share Posted December 4, 2019 @lax Try out this driver. I haven't tested it on a system running OS 2, but I believe it will still work. You will need to bind it to the temperature out bindings of the module. A (uncontrollable) thermostat will show up under the Comfort menu. Also, I am a Control4 employee, but Control4 does not support or endorse this driver in anyway. Please use at your own risk. No is warranty implied or otherwise, etc.. TstatConnector.c4z ERDrPC and South Africa C4 user 2 Quote Link to comment Share on other sites More sharing options...
lax Posted December 4, 2019 Author Share Posted December 4, 2019 Thank you for the driver. The issue appears to be getting the temperature off the CardAccess unit (WCS10A-2-ZP). It's available in variables, but was hoping there would be a binding that could be made between the CardAccess unit and the temperature display driver. The unit only has three bindings, all for contact_sensor. Seems I have to fiddle with variables and programming to maybe get this to work. Quote Link to comment Share on other sites More sharing options...
dcovach Posted December 4, 2019 Share Posted December 4, 2019 8 hours ago, lax said: Thank you for the driver. The issue appears to be getting the temperature off the CardAccess unit (WCS10A-2-ZP). It's available in variables, but was hoping there would be a binding that could be made between the CardAccess unit and the temperature display driver. The unit only has three bindings, all for contact_sensor. Seems I have to fiddle with variables and programming to maybe get this to work. You can make bindings with the Z2IO and the newer C4 Temperature Display driver but this does not work with the Cardaccess unit. You have to do programming with the variables and the custom temperature display driver (Yatun). I can't speak for the driver above that was posted but the programming method works with Yatun's driver. Quote Link to comment Share on other sites More sharing options...
lax Posted December 4, 2019 Author Share Posted December 4, 2019 I figured out how to do this using the older Card Access driver (from 2009) for the WCS10A-2-ZP and not the newer one labeled Control4 (from 2015). Then, to display the temperature, I used this driver (also from Card Access) That Thermostat Display driver allows you to select a Source Device under the properties and voila, the temp shows up. However, if you use the Control4 driver for the WCS10A-2-ZP, then the source device won't show up as a selectable device. Quote Link to comment Share on other sites More sharing options...
Amr Posted June 4, 2020 Share Posted June 4, 2020 On 12/4/2019 at 7:33 PM, lax said: I figured out how to do this using the older Card Access driver (from 2009) for the WCS10A-2-ZP and not the newer one labeled Control4 (from 2015). Then, to display the temperature, I used this driver (also from Card Access) That Thermostat Display driver allows you to select a Source Device under the properties and voila, the temp shows up. However, if you use the Control4 driver for the WCS10A-2-ZP, then the source device won't show up as a selectable device. Can you extract this driver and send it please, can't find it in DB any more ... Quote Link to comment Share on other sites More sharing options...
Jeffrey Posted June 5, 2020 Share Posted June 5, 2020 Can you extract this driver and send it please, can't find it in DB any more ...Sent you a pm. JeffSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
sunshine Posted July 19, 2020 Share Posted July 19, 2020 I also need this driver, if you don't mind. Quote Link to comment Share on other sites More sharing options...
lax Posted July 20, 2020 Author Share Posted July 20, 2020 On 7/18/2020 at 8:42 PM, sunshine said: I also need this driver, if you don't mind. I would send it, but I'm away from home at the moment and don't have access to the system Quote Link to comment Share on other sites More sharing options...
sunshine Posted July 23, 2020 Share Posted July 23, 2020 No prob, I appreciate it tho! I found a link for it elsewhere here. Posting in case anyone else needs it. Also, Yatun has a free Temp Display driver that more or less let's you do the same thing, just have to do it off of variable programming. I actually prefer that driver as it doesn't show any thermostat controls like set point or mode in the UI. temp_tstat.c4i Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.