Domosapiens - Advanced Blind Control V14.0.0

[pbir]

Announcing the availabllity of V14.0.0 of our popular Advanced Blind Control driver:

⦁    Enhanced control of any motorized shade connected to a Bond Bridge.
⦁    Enhanced control of any motorized shade controlled by two or three relays (Up, Down, Stop).
⦁    Ability to ‘encapsulate’ and enhance any third-party blind driver which currently supports only Up/Down/Stop with no feedback.
⦁    Interface with Control4 using the blind slider control with simulated positioning of blinds.
⦁    Ability to cause a one-way blind to move to any position reasonably accurately.
⦁    **NEW** SPECIAL Toggle/Stop keypad connection which provides additional control (used instead of normal Toggle).
⦁    **NEW** Ability to define a smaller limited area where the blind can operate when disabled (by an open door or window contact, for example).
⦁    **NEW** Ability to forward blind commands to other blinds, as an alternative to using groups.
⦁    Ability to control blinds via programming Events (Up, Down and Stop events with another driver actually sending the commands).  
⦁    Support for dual motion blinds via a new ‘Blind with Tilt’ driver (Event control only for the tilting part). 
⦁    Blind Driver Scenes which can easily position controlled blinds at any position (individually selectable).
 

The driver is available on DriverCentral at Advanced Blind Control

[Matt Lowe]

would this work with the Somfy Urtsii?

 

[Cyknight]

You would want their Somfy Generic RTS driver I would think, which did all this already.

[pbir]

1 hour ago, Matt Lowe said:

would this work with the Somfy Urtsii?

 

If you already have the free URTSI driver, the Advanced Blind Control driver can encapsulate it and provide all the advanced features listed above.  Otherwise, as Cyknight said, simply use our Somfy Generic RTS driver which supports the URTSI and has the timing model.

[Midnight1982]

On 2/10/2023 at 4:35 AM, pbir said:

Announcing the availabllity of V14.0.0 of our popular Advanced Blind Control driver:

⦁    Enhanced control of any motorized shade connected to a Bond Bridge.
⦁    Enhanced control of any motorized shade controlled by two or three relays (Up, Down, Stop).
⦁    Ability to ‘encapsulate’ and enhance any third-party blind driver which currently supports only Up/Down/Stop with no feedback.
⦁    Interface with Control4 using the blind slider control with simulated positioning of blinds.
⦁    Ability to cause a one-way blind to move to any position reasonably accurately.
⦁    **NEW** SPECIAL Toggle/Stop keypad connection which provides additional control (used instead of normal Toggle).
⦁    **NEW** Ability to define a smaller limited area where the blind can operate when disabled (by an open door or window contact, for example).
⦁    **NEW** Ability to forward blind commands to other blinds, as an alternative to using groups.
⦁    Ability to control blinds via programming Events (Up, Down and Stop events with another driver actually sending the commands).  
⦁    Support for dual motion blinds via a new ‘Blind with Tilt’ driver (Event control only for the tilting part). 
⦁    Blind Driver Scenes which can easily position controlled blinds at any position (individually selectable).
 

The driver is available on DriverCentral at Advanced Blind Control

Hi 

 

Leviton panel with blinds attached to lighting units, somfy ILT blinds. is there a way to control thru leviton via control 4 direct? having trouble with leviton panel reading the data on control 4. 

[pbir]

See my response in the other thread.

[Midnight1982]

31 minutes ago, pbir said:

See my response in the other thread.

which thread?

[pbir]

https://www.c4forums.com/forums/topic/42004-leviton-rs485-somfy-ilt-blinds-and-cbus-with-control-4-solution-required/?do=findComment&comment=323551

 

[CMD]

Hi, I appreciate the above thread is quite old.  Does this driver work with the UK version of the Somfy Tahoma Switch?

[pbir]

For the Somfy TaHoma devices (older Beecon or newer Switch), there is a certified Control4 driver.  However, the driver supports ONLY the North American versions of the Somfy TaHoma devices.

Paul