rayk32
c4Forums Member-
Posts
327 -
Joined
-
Last visited
-
Days Won
4
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Events
Everything posted by rayk32
-
Ok ... so apparently you are either "special" or have a mental illness that needs to be addressed, but it is clear that you cannot control your impulses to make these types of comments. Perhaps, some life experience that has had a negative impact, but whatever it is, maybe a little self-examination as to why you feel the overwhelming need to be this person will allow you to seek the mental help you clearly need ... or maybe, despite all the good help that you give, you also have a desire to be the C4forums troll.
-
Exactly why I said: If you're running one of the more RECENT 3.x versions of the operating system, SSH probably won't work. If you aren't VERY FAMILIAR with root access via SSH and LINUX/UNIX commands ... DO NOT ATTEMPT THIS The first comment clearly shows that I was aware he/she is running a 3.x version of the code and the second comment explains that the user should not try this if he/she doesn't know what he/she is doing. If somebody is VERY FAMILIAR with root access and LINUX/UNIX they know where the logs are located and how to read them. There are all kinds of things that can be done to troubleshoot an issue, looking at the logs is a valid troubleshooting step. Finally, why don't you stop looking for opportunities to be petty and/or make your little snarky comments every time people on this forum are trying to help each other. We had a term for this in practice and the locker room for this same behavior that doesn't need explanation or to be shared on a public forum, but your history of responses definitely qualify.
-
Check the logs on the controller to see if anything weird is going on. You will have to SSH into your controller to do this. Google "SSH to Control4 controller" and you will find the root password and procedures for doing this. If you're running one of the more recent 3.x versions of the operating system, SSH probably won't work. *** IMPORTANT INFO *** If you aren't very familiar with root access via SSH and LINUX/UNIX commands ... DO NOT ATTEMPT THIS. Call your dealer or ask one of the dealers on this forum to help you remotely.
-
Neeo NE-RMT has poor wifi connectivity
rayk32 replied to DAVIDN's topic in Troubleshooting, Workarounds, & Bugs
Are you running released or pre-released code on the AP's? In a setup with an Edgerouter instead of a Dream Machine, are the AP's associated to the Edgerouter or is something different that controls the wireless configuration? -
Neeo NE-RMT has poor wifi connectivity
rayk32 replied to DAVIDN's topic in Troubleshooting, Workarounds, & Bugs
correct. is it set to allow? sorry, i don't know the answer regarding the Neeo's capabilities. -
Neeo NE-RMT has poor wifi connectivity
rayk32 replied to DAVIDN's topic in Troubleshooting, Workarounds, & Bugs
Interesting ... that is how my network is configured. I have 2 Nanos and a FlexHD and my two Neeos stay connected. What is BSS transition set to? -
Neeo NE-RMT has poor wifi connectivity
rayk32 replied to DAVIDN's topic in Troubleshooting, Workarounds, & Bugs
Try creating a new SSID that is 2.4GHz only with the default settings. You can tie the new SSID to the same VLAN where your Control4 equipment is connected. Disable PMF-Protected Management Frames, band steering and perhaps proxy ARP. You don't need "legacy mode" because that is for when you have 802.11b devices in your network. -
Best Alarm system that integrates with Control4
rayk32 replied to C4Newbie's topic in General Control4 Discussion
Qolsys IQ Panel 2 Plus integrates very nicely. There is a version of the panel that can reuse a lot of the sensors you already have for your Concord4 panel. I did that exact thing when I replaced my Concord4 panel. Contact AlarmGrid ... they are very helpful. https://www.alarmgrid.com/ -
You definitely should build a separate SSID that is 2.4 Ghz only for your Neeo’s as stated above. I did that for my Neeo’s and my Qolsys alarm system and I haven’t had any connectivity issues since doing so.
-
I received the 2 Neeo remotes as promised and they were packaged very nicely with an unexpected bonus of an extra power supply and charging base. The remotes were added my project and they work perfectly. A totally different feel as compared to the 250's and 260's. I definitely like seeing the logos and graphical presentation of my sources. I haven't done anything with favorites or other customizations yet, but I'm looking forward to it. Zappbranagan was very responsive and it was a good purchase experience. Thanks for everything! @Zappbranagan
-
I am interested. I will direct message you.
-
Has anyone looked into the possibility of integrating this with Control4? I don't see any mention of it on this site. https://mycroft.ai/ I'm guessing the project community would need to create a Control4 "skill" for this to work.
-
-
Ok thanks.
-
Hello, Is there a generic (Control4 or 3rd-party) HDMI driver that I can use to display the output from this device on my TV's via my video matrix? I would like it to show up as an option in the Video section on my remotes. This device is very basic and its only function is to display your Unifi Protect cameras on a TV or monitor via HDMI. There is nothing to control. https://store.ui.com/collections/unifi-protect-accessories/products/unifi-protect-viewport Thanks
-
Ok thanks. I'll do that.
-
Yesterday
-
Thanks. Unfortunately, I am using the correct app version.
-
I am having a problem where my iPads will not connect completely. They see my account and controller but the Account Name, Licenses In Use and Remote Access fields just spin. I am running 2.10.6.561784-res. My iPhone is able to connect with no problems. I have uninstalled and reinstalled the Control4 IOS app, rebooted the controller, deleted all devices from Control4 account. Can anyone advise how to resolve this issue? Thanks.
-
Adding Streaming "Channels" to the "stations" feature
rayk32 replied to eggzlot's topic in Programming with Composer
The stations that I've created in Pandora automatically show up in the Stations interface in C4 as far as I can tell. I've never had to do any programming for this to happen. Is that what you are asking? I don't use Sirius but I just added a favorite in Sirius and refreshed Navigators and it showed up in Channels.