Topfox

Hey everyone, I have a projector that I am using the PJLink driver with on OS 3.1. The projector is using IP control. I’m having an issue where if I turn the room off, it turns off everything but the projector. If I open the control of the projector in HE, I can hit the off button on the projector and it works every time. Using the Epic Systems Echo driver, I created a voice command to turn off the projector which also works every time. Any idea why room off through navigator would not turn off the projector?

This is what I have, the Pentair lights. Just created buttons that flip a Control4 on/off switch on/off the correct amount of times to reach the color state desired. Pretty sure even in Pentairs app, it’s actually doing basically the same thing. My neighbor has the Pentair WiFI enabled equipment, and when he selects colors we can here the clicking coming from the system.

Not sure the last time you looked at using your own hardware with FIOS, but you may want to try it again if you are still interested. I do this today with a Ubiquiti USG. On Demand, FIOS Apps, DVR, everything still works. I had to setup some port forwarding rules, but other than that there wasn’t any major work that needed to be done.

Ok. Next question anyone willing to download the latest version and share it with me?

Can anyone tell me what the latest firmware is for this camera? I’m currently running The following version, but it seems only dealers can get to the firmware updates website for PackEdge. 5.2.92.6754

Mine is up against a wall and I left a service loop in all my wiring. This way if I need to redo a connector or something I can cut and go. Also my rack is on wheels, and having this service loop allows me to pull it away from the wall and turn it if I need to get into the back of the setup. Works out pretty good for me.

Thanks. All the IRs being controlled with custom cables are just for TVs. All Input sources are centrally located in the cabinet have non custom IR cables.

All, Cant remember if I have asked this before, but is there a downside to using the LU1E for getting IR to remote locations vs a direct line from an EA-3 or Extender? I have a 8x8 Matrix, and my installer ran separate CAT5 runs for the IR vs using the 6 - LU1Es that are in use. The way they did it is kind of messy in my cabinet, so if there is no real downside I may try to switch it up vs their custom IR cables that are part emitter part CAT5.

For what it’s worth, I have an 8x8 Matrix as well and I have 4 Fios quantum boxes (smaller ones) hooked up to mine and am not having any issues.

Hey everyone. Playing audio through my matrix over HDMI to none amplified speakers is horrible. FIOS TV box, Fire TV Box, I have to turn the volume all the way up unless the TV has a sound bar or is hooked to a receiver. Although even with those I noticeable have to change the volume level between those and say Airplay running from the EA3 to the RCAs of the Leaf Matrix. Am I missing something here? Is there a way to modify this volume control? Example I have a SunbriteTV and if I map my FIOS box or Fire Box to the TV, I can turn the volume to 100% on the TV and it still doesn’t sound loud. If I take a tv I have inside with a sound bar I can map the same sources and not have a volume problem.

I hope that’s not the case. A one button press to swap my center tv source with then tv on the left source or the tv on the right source is a lot better than swiping favorite rooms and having extra selections to remember which TV is currently on which cable box. I don’t want to have to think.

Definitely missing this driver being functional. Hopefully/Really hope....they are able to fix it in whenever there ends up being another update.

Hey everyone, Does anyone know what the image resolution settings are for the portrait mode version of images for Navigator UI? We saw that it says 1920x1080 16:9, but this is for landscape mode. In portrait is cuts the image vs resizing. Thanks

Hey everyone, Is there any way to re-apply an update to the controller, or is there any indication that a new update is coming sometime in the near future. Ive definitely feel like this latest update has introduced some gremlins into my setup. One of the more annoying ones is I have devices that timeout their connection to my system, then when I try to connect again it tells me I have to authenticate again and forces me back to the logon screen. Thanks

Thanks!

Does anyone know what the latest firmware is for the Leaf Matrix switches?

I have a different NVR than you do. I have a Lilin, so I probably wouldn’t be much help on an exact setting within the NVR.

For mine there ended up being another setting I needed to change in the NVR settings. In the end though I’m not recording on motion. I found the cameras no matter what sensitivity setting I set it to picked up motion basically all the time. So no I’m tagging motion events but recording 24/7. Think my NVR makes it 3 weeks in this mode before it starts erasing. Then I can just search on motion tags when I do playback. Because of the sensitivity, notifications also became pointless

Thanks M. What is the normal turn around from c4 on these things? Should I expect a new driver at some point, or maybe it will be fixed in the next os increment. I know it’s kind of a loaded question, so best guess on your years of experience.

Ok this driver not working is getting super annoying. Does anyone know if c4 is trying to fix it?

Thanks. Hope it gets fixed, or if maybe someone knows of a different driver that does the same thing let me know. The one button swapping was perfect for my setup.

Im convinced this driver just doesn't work anymore. Let me know if anyone else is using it with success. I went through the instructions multiple times and just can't figure out what Im missing with it.

Hey Everyone, Im using the video wall driver in my setup. Ever since going to v3+ the driver seems to have become extremely flakey. Sometimes it works sometimes it doesn’t. Right now it is completely not working. Is anyone else using this driver and having a similar experience on v3?

It was painful, but finally just deleted everything in Composer, and Alexa I’m relation to the driver/confit and redid it all. Luckily for me most of the stuff I never used anyways (could never remember what I named everything) so ended up being a forcing clean up function. But alas I’m up and running again.

My whole setup is a mess now. For the amazon stuff I loaded in the new driver and did the trigger discovery and it only found one. My multi screen driver is no longer doing screen swaps. And now FIOS gave me this TV One Minis that I can only get two devices to actually register. Wtf.