AshMania

Is there feedback from the fan via this driver?

About a year ago, I had contacted Foxun about this exact model (SX-MX12B) and they had mentioned that they have Control4 drivers for it - IP based as well as serial based. Is that not the case? And how is it working for you?

I tried this and it didn't work - same driver as the one online...

Hi there - can you post the link the driver? Having the same issue. Thanks

Hi all I am installing a Zigbee 2 IO module (C4-Z2IO) to sense the temperature within a cabinet and based on the temperature, I want to control a 240V Control4 Wireless Puck Switch (C4-SM201-Z) on/off to essentially control a vent. I know that the Z2IO has a relay built-in that could potentially control the 240V vent directly, but the vent is already on the C4 switch. I would also like the current temperature to be displayed at all times. What's the best set of drivers to be able to do this? Would I be able to set the on/off temperature via the touchscreen or would that have to be done via programming? Thanks

Would the Bitbucket IP driver work with an old Panasonic plasma model TC-P50GT25? Thanks

I have one - PM me your offer

Does the fan speed vary according to the dimmer or are there preset speeds that you can program (off, low, med, high, etc.)?

Hi all I know there are Zigbee based temperature sensors (like Z2IO, etc.) that integrate with Contol4... But I am looking for a WiFi based temperature sensor that could be integrated into Control4 for sensing the temperature and turning a fan/off via a relay. Again Zigbee is not an option as the location is too far from the EA5 and there are no other Zigbee devices in the system - so I don't want to start adding repeaters just for this one device. Any suggestions? Thanks

I have no experience with a VOIP PBX. I have no influence with other tenants - so, that doesn't seem like a feasible route. I guess I will leave the security desk as a separate phone line/system for now.. Thanks all...

Hi guys I have a DS2 door station (no keypad) and a dedicated Yale deadbolt. When the door bell is pressed and the video shows up on the T3 intercom screen, is there a button or something that can be enabled to potentially unlock the Yale deadbolt? Thanks

That is the fallback - would love to not have more equipment on the wall or a table. Not just aesthetically but also won't confuse folks trying to answer the security phone vs the landline. I am intrigued by the SIP integration "experiment"...

Sorry, but that is not possible - are there any other options?

Hi all I have a weird question - tried searching the forum but couldn't find anything close to my issue - so here goes... I have a C4 installation in a condo in a larger apartment complex. There is a security desk downstairs that has the ability to call each individual condo via a phone line (or so it seems - don't know how its done as there is no dedicated phone number for each location). The easy option for me is to get a 2-line phone system (1 for the landline and 1 for this intercom to the security desk). But I'd rather have the security desk integrated into my C4 system as an intercom - I would like to make audio-only intercom calls from the C4 touchscreen / mobile app to the security desk and vice-versa. Is that possible? If so, do i need special hardware? Thanks

I am in the same boat with 2 dead WB-600 units - willing to offer some incentive if some dealer wants to help be the liaison with SnapAV. Thanks

Hi Do you know if this driver will work for Vizio M75-C1 TV? Thanks

Hi - I am also considering the same screen with dual motors - one for the screen and one for the masking panels. Do you have the specific model numbers for the parts that are needed? Thanks

I am using Hikvision DS-2CD2432F-IW for my baby cams and they are integrated into C4 as well as my Lilin NVR...