ejn1

Nope, it has just came back to normal operation on its own. It was in this red blinking light stage for about 1.5 days...

That's what i figured

Thx, Load has been dimmable for a while.... Just all of a sudden this happened.

$79 Unifi Flex G3 Camera. Impressive little camera for the money and works with the generic IP driver for C4.

HI all, anyone see this occur ? I have a blinking red light on one of my dimmer's and it states Mosfet Failure in status. The light does not turn on and off at the switch as well (staying on). Any thoughts? Thx in advance

Many thanks!!!!

Yes

Just checked and my driver is set to auto update but apparently it is not auto updating (??) My driver version is 1.7.167. Any idea why it's not auto updating? I also have your LINK driver in my project. Thanks!

I will check it later when home. Thanks. Have you seen this issue lately?

Yes

I've been having a problem lately with IP wake up with the annex driver and latest OPPO firmware. Was working for over a year flawlessand now not waking up. I checked the settings and appears to be OK. Any thoughts or others ha ING similar issue?

I use jriver for my high end audio player needs but not sure i ever had the need for c4 integration. Maybe video is the linkage.

Is that screenshot from the DSC remote software? I loaded all of my settings via the panel touchpad and followed the C4 instructions step by step.

I'm controlling my system via IP. Works great with my C4 system. I'm not using the Neo Go app...

I've used both and they both appear almost identical aside from one being free

Good to know... I dont see the min RSSI setting only the ability to adjust power levels on the custom power settings...

Thanks Rolldog. You and I have a very similar system and approach. I have setup my my AP's with wifi analyzer and have used many of the tactics and features you mention and I have been using their APs also for a couple of years. Maybe the only difference with my system and yours is that I like to setup a dedicated 2.4 SSID and a dedicated 5GHz SSID rather than use band steering etc. This way i can guarantee getting off of the congested 2.4Ghz freq for equipment that can do it. On my T3, I think the issue was probably my error that I mentioned above. I had added another AP to a far corner of the house and it was on the 5Ghz SSID but i had forgot to disable the 2.4 band on just that one AP. So the T3 was connected back and forth to it and the SSID for the 2.4 and I was wrongly thinking the T3 was 5Ghz capable since it connected. I haven't had a drop yet now that i fixed that AP but if I do then the next thing I will do is fix the T3 to one particular AP versus letting it roam. I do think however that the T3 has jumped around more than my ipads and other devices and you have seen others mention that 2.10 improved T3 wifi which indicates to me that something warranted improvement . I will keep watch on the T3 and see how it does but so far its ok since i fixed that AP. Also, is the default power High? Mine are all on "Auto" setting and I thought that was default but not sure.

Good to know. Thanks Matt

agree. i'm hoping this will improve its performance.

a lot of times im sure. In this case, you would think the T3 just sees 2 SSID's one with a stronger signal. Not sure even in my example above why that should cause several drop outs on the T3.

i have a ubiquiti home network with WAPs across the house. Your comment about 5G sparked a thought to check something as i have a dedicated 5G SSID that this touchscreen was connecting to periodically albeit with weak signal and then it would revert back to 2G. I noticed that on a far room WAP that I added after the fact that on that WAP I did not exclude the 2G bands on the 5G SSID So I fixed that and now it wont at least try to flip to the 5G network which was really a far away WAP with 2G on it. I dont know if that is the issue in the end but I will watch it and report back. As the guy above posted, some T3's in his system are stable and some not so not sure. Thanks for triggering the check as i thought the T3 was 5G capable since it was connecting to my 5G network (i thought).

0 My exact experience

Hi, I have a T3 in my system that unfortunately has not ethernet connection so I have to go wifi. I have had fairly consistent reboots and losing wifi issues with it from the start. I have a fairly robust wifi network and have tried 2.4 and 5Ghz connections and the T3 reacts pretty much the same with either. Are there any tricks that i'm missing to get more stability out of this connection? Thanks in advance!!!

What do you Guys mean by volume feedback?

I have tons of Unifi gear but still a big mystery as to what this driver will actually do... Look forward to hearing about it.