Christian87n

Hi everyone,
We have now released the new Big Ass Fans driver for Control4 which supports the new Big Ass Fans API.  Developed from the ground up by our very talented @Andrew luecke this driver supports all IP controlled fans including Haiku (firmware version 3+), ES6 and i6 fans with the following functionality.
Fan Speed Control Preset Speed (On speed when toggled) Whoosh, Fan Direction Light Dimming Light Color Temperature Adjustment. Temperature & Humidity Feedback Occupancy Sensor Support + more Existing Big Ass Fans Haiku Control4 driver customers can install this driver at no additional charge. Note customers must upgrade to the latest version of the firmware for this new driver to operate.
Big thank you to Big Ass Fans for their support on this project.
For more information please see link below.
https://chowmain.software/drivers/control4-big-ass-fans-haiku

You'll need to submit a helpdesk ticket for us to troubleshoot further with logs and probably remote access details to your system.
https://www.chowmainsoft.com/support
We don't have sleep mode implemented (or know how to do it).  The API for lights only give us the details on how to set the value.  As such you will have to do your own programming to do raising and lowering.

Sold to a super nice forum member!

Just programmed all the TVs I want to on doorbell press snapshot room, pause room, if dark turn on certain lights, show front door camera for 20 seconds, then snapshot back to how it was. Also if nest CO or Smokes go off to open all shades, (for CO to open garages and turn on bathroom fan vents), unlock doors, turn off hvac, turn on lights inside, flash outside, and if CO not cancelled by triple tapping top button on a keypad after 5 min will call FD through alarm system. I'll probably create a custom button to disable this as well. I have 4 alarm company detectors then nest protects in all bedrooms, alarm system fire are already tied into alarm so I didn't program fire to call FD. Oh and all TVs come on w all cameras showing. 

Just so that you know - you can use a remote dealer anytime you like.  For a problem like this it will take a few minutes, that's all.  Your current dealer doesn't even have to know, if you still need him to finish up other work and are worried about upsetting him.
Personally, I'd cut your losses and move to a remote dealer for everything.  You will be impressed how much you can squeeze out of this hardware with the correct programming, especially if you want to learn how to do some of this via HE.

You need a new dealer, this is programming 101.  There are plenty of guys that could help you on here.  And yes this can be done via HE.
When button is pressed
   -> Arm alarm
   -> Close garage door
   -> Lock locks

The reason it is cycling is because that is what garage door openers do.  By itself, the clicker doesn't know the state of the door.
If the answer above doesn't work then programming needs to use a conditional from the garage door sensor...
When button is pressed
-> If Garage Door State is = Open
-> close (or toggle) Garage Door
He may be having a problem because of the driver he is using.  Should use Relay garage Door Controller (OS 2.9+)
Seriously - if your dealer can't manage this, it's time to find a new one.

Conduit is the most future proofed addition!!!

You need the matrix.  It's where all the control for the volume comes from.  You could use a surround sound (main zone) receiver with Zone2 (outside).

motion sensor in the front yard for feral and bad neighbors relieving their animals in my front lawn. The sprinklers always seem to come on at the worst of times.
 
Whistle on the yard speakers if the dogs are barking too much will spook them and shut them up promptly.
 

I don't have anything "configured" -- so I guess full access. The default settings for everything. I do have wireless channels deconflicted with the neighbors now that I live in a neighborhood instead of the country.