Dueport

1 hour ago, SpencerT said:

Yes, it disables auto unlock. The Yale app can no longer communicate with the lock. You would have to put together a geo solution for c4. 

I can’t speak to other models that use the Yale Access app, but I can report definitively that, with the Assure 2 locks with C4 zigbee module installed, the app can continue communicating with the lock (you can setup and manage auto lock from the app in this way - as well as a number of settings, lock firmware upgrade, etc) as long as it is in Bluetooth range of the lock.  I believe the Assure 2 has a built in Bluetooth radio which does not deactivate when the C4 module is in there and in this way allows advanced features and lock control through the app. Really like the Yale Assure 2 and C4 module combo - C4 integration remains perfect totally reliable, user management and all C4 features work great!

1 hour ago, Cinegration said:

The driver update is now complete: https://drivercentral.io/platforms/control4-drivers/security-systems/unifi-protect/

 

Note: Turn OFF Medium RTSP stream and Turn ON Low and High streams in UniFi.  There's something wrong with this specific stream resolution where the framerate is coming in wonky... Thus C4 can't view the medium livestream.  

 

• 20230118
  • Update to use new camera_v2 proxy commands (Control4 OS3.3.2+)
  • Added dynamic snapshots
  • Added liveview (iPhone)
  • Added support for different resolutions
  • Added line cross detection events
  • Added Package detection events
  • Added motion detection to Protect Light driver
  • Fixed issue with Protect light not toggling

UniFi Protect Control4 drivers (20230118).zip 1.91 MB · 0 downloads

Wow - that's a great update - thank you!

45 minutes ago, RAV said:

Confirming these are the locks that are compatible with the current Control4 Zigbee module and existing Control4 Driver?
(Rep nor tech support could confirm, and both said didn't think so, that's why I'm tripple checking.)
Thanks.

Those are they - I have the same model but without key

7 hours ago, ejn1 said:

Thanks,  when you say "new card",  do you know when this card was released?  I got a card about a year ago for the last Yale lock which was a different zigbee card than the first gen Yale locks.   Are they on the 3rd revision of that card now for Yale?  Thx

I got mine from @chopedogg88 if you need them - they work perfectly with the new yale assure 2 locks.  They're the red ones and say "AYR202-ZB-C4 V. 5.0" on them.  I believe "V. 5.0" is a reference to the firmware on the module.  To work properly both the lock itself and the module must be running the latest firmware.  I say this because at first the Assure 2 would join but was unreliable and couldn't be managed in the UI - but once I updated the firmware both the lock and the module (the module firmware is updated through Composer) then - presto - worked perfectly!  I have 3 of the Assure 2s and 1 of the older YRD226L locks and they all work perfectly and are rock solid - a HUGE improvement over the old Vera Z-Wave integration in terms of reliability and quieter operation and features (and aesthetics) - highly recommend the upgrade.

1 hour ago, zaphod said:

I didn't know Govee made appliances!  Interesting to see that they have a smart ice maker.  I didn't know the world needed a smart ice maker.

The world didn't really need this smart kettle either but now that we have one it is kinda handy

I've had similar reliability issues trying to do something similar to you (display camera on multiple TSs at the same time - in my case between 5-7 TSs both wireless and wired) based on vehicle detection trigger.  The trigger works perfectly but sometimes the camera image displays on all and sometimes some and sometimes none.  I'm still trying to determine if this has to do with the camera driver or the agent so haven't isolated the problem myself......hoping this camera agent is improved in the next update to include snapshots from a different location so the unifi camera drivers can support that directly in the future - and address bugs (if this is a bug)

On 12/27/2022 at 7:10 AM, alanchow said:

The driver was only written for lighting devices and smart sockets.

We have not tested it with other devices.  It may work or it may not.

The API documentation list devices that work via their API.

https://govee-public.s3.amazonaws.com/developer-docs/GoveeDeveloperAPIReference.pdf

I am concerned that the appliance rate limit is 100 per day versus lighting which is 10,000 per day.

What this means is that including both polling and control we can only talk to Govee appliances 100 times a day.  This would make timelyness on feedback impossible.

 

Thank you - looking at the documentation, it looks like this Kettle (Govee Product Model H7170) is an appliance but not a supported device in the current version of the API.  Very frustrating on the part of Govee and explains why this isn't working.  Appreciate your help @Andrew luecke and @alanchow

On 12/27/2022 at 2:31 AM, Andrew luecke said:

If you PM me your API key, I'll take a look  when I return to work . Some devices, irrespective of anything else don't seem to be accessible by us (like the Double GPO). However, this might be considered an appliance (which we don't currently support, however, I would want to confirm it is one, as we haven't come across anything in the field which is announced using the appliance API actually). 

 

Andy    

Thank you - will do - appreciate your help!

I'm trying to add a Govee Smart Kettle to C4 for a morning wake up routine.  We've added the Chowmain Govee driver ( @alanchow and @Andrew luecke ) and I've activated the API key but it isn't importing any Govee devices - debugging appears to indicate it is only looking for lights.  Is this driver limited to lights only?

Anyone know if there are drivers for these? Looking at some new lamps for the office. Momax looks like it may use Tuya so a shame about the that driver can’t tell about Meross

Is this the regular my music or dlna? We have a big library probably that size and the dlna driver with Synology server is stable for us

7 hours ago, saneemperor said:

I'm trying to get a Twonky DLNA server integrated and the C4 My Music(DLNA) app version 146 doesn't seem to recognize the server. 

I've tried the following with no success:

1. Power cycled NAS with Twonky as well as EA1 and HC800
2. Remove the regular my music driver in project (a thread I came across on the web suggested having both could be an issue
3. Rediscovered servers (many times)
4. Refreshed navigators
5. The rokus CAN access the twonky server
6. Deleted and added the driver a number of times with not luck

The DLNA server selector drop down list is empty and has been every time.  

It seems the twonky server is the best one from what posts on the internet say, so it seems like this should be able to work.  Any feedback is appreciated.

I had the exact same trouble with Twonky several months ago when I tried it and couldn’t get it working either. I also tried Plex but it was unstable in discover for me and ultimately settled on Synology’s DLNA server.  It was frustrating because I wanted to use Twonky too since it supports search.  I’m sorry I don’t have any good suggestions to fix and wonder if the my music dlna driver in C4 is outdated 

21 minutes ago, Cyknight said:

Either would work - all you need is to send power over a two conductor.

thank you @Cyknight!

3 minutes ago, mkhess2012 said:

Can anyone tell me if this doorlock works with control4 or if we need anything special to make it work?

 

I just posted in another forum re another yale real living lock - different model.  Based on my experience there I would say this should work as long as the lock firmware in this YRM276 model is version 2.7 (check the circuit board) or higher and you're using a current c4 zigbee module. the driver requires firmware 2.7+ on the lock itself and a current module.

Wanted to post a quick note for anyone in the future that may be trying to add this lock to their project.   tl;dr - it is too old and won't work properly with C4.

The lock came out a while ago, I bought new (according to amazon) this month (went with this because the color (polished brass) matches our current hardware and newer models don't come in this color).  We got it added to the project (using the red c4 yale zigbee module) and it appeared to work correctly - would lock and unlock but other functions didn't work (wouldn't update status and lock management kept failing when trying to add codes through c4 app).  Noticed in driver the model number (default) and hardware version (0) didn't change too.  Some forum posts alluded to similar issues. 

Noticed the driver documentation says it requires a c4 zigbee module firmware of "at least version 4" (check - mine was version 5) and "version 2.7 lock firmware" (fail - mine was 2.2).  So this last thing was the issue and it isn't easy to find the firmware version - you have to open up the lock and look at the board where (in my case it said "SW2.2-1504-00354"). 

When we replaced this lock with a newer one (a YRL226 using the same c4 zigbee module) running "SW2.8" everything worked perfectly.  So the issue appears to have been the firmware version being outdated.  Just wanted to flag this for anyone that may be searching the forums in the future since the reference to the firmware version issue is in the driver doc and the lock's firmware is different from the module's and not easy to find....

Does anyone know what wiring needs to be in place for the Axxess Motion Sensor 360°?  It says low voltage but I don't know if that needs a cat 6 run or a 22 gauge security/control wire.....

like prior post, we had a blackbird when we first switched to C4 (not this particular model but same idea) it worked fine on its own but there were no drivers that worked with it and the lack of any control at all for integration was a deal breaker.  I sold it and replaced it with a C4 video matrix and it was one of the best upgrades we've made.

43 minutes ago, Leighm0 said:

It's public on YouTube here https://www.youtube.com/watch?v=_vTav930ARs

Oh awesome!  Thank you for posting!  I couldn't find a link anywhere and had given up - excited to watch this!

2 hours ago, dinom said:

I signed up for the SNAP One Premiere event that’s happening tomorrow. Looking forward to the new remote controls. I’m sure if these look good and perform well, they’ll be quite a few gently used NEEOs for sale at a good price, including mine

Is there a stream of the presentation we can sign up for to watch or is it limited to CEDIA attendees?

21 minutes ago, msgreenf said:

Happy to work with you! Message me!

 

Mitch

@One True Mitch is fantastic - I’ve worked with him for a couple years now and can’t recommend him enough. I’m very hands on with our system like you and with Mitch’s help we have a system our entire family loves and I’m proud of - wouldn’t have been possible without Mitch!

7 hours ago, South Africa C4 user said:

You hit the settings button and from there it is one click to choose the other house.  The app automatically opens in the house you were lin last time you used the app.

So multiple homes are each a separate project in composer? When you buy a driver does that work for all projects/homes or do you have to buy the same driver multiple times for each home?

5 hours ago, mstafford388 said:

Weird request but does anyone have a copy of the Annex4 hydrawise driver?  I just took over a customer that has that driver and it works, we just need to add a few more sprinkler zones.  I see it on their website but it won't let me download it until they approve my account and I'm pretty sure they are gone right?

Wait they’re gone?  Is this driver abandoned?  I thought it was the official driver? We’re adding irrigation next year and the irrigation company prefers hydrawise for their troubleshooting so, for that reason, was going to go with that over rachio but if this integration is gone I may change gears and go with rachio…..

On 8/4/2022 at 4:27 AM, booch said:

Experimenting with a 'key code entry' UI button tonight and remembered this thread so figured I'd share.

Built the below (video) which cycles through the state of all 'numbers' on the virtual pad in navigator.

• Enter code correctly (1-3-5 in this case) and it 'unlocks' (enabling functionality)
• Enter incorrectly, e.g., out of order, wrong length, etc., goes to off
• Select while 'unlocked' and it goes to off/'locked' 

Could of course tweak the concept, e.g., # of buttons, visual style, etc. If anyone's interested, happy to send.

 

 

Very cool!

We just discovered tonight that all this seems to be fixed!  I've used keypads, app, and TSs and verified that Coffee House and Symphony Hall are both working for us again.  Also checked the other channels others have mentioned: Seriously Sinatra; Lithium; BPM; and Watercolors.  Can others verify things are working again for you?

So it looks like they might have fixed this?!  That's amazing - huge thanks to @Jonathan, C4 Engineer and @Darin, C4 PM UI for your help getting this resolved so quickly!

Thank you @Jonathan, C4 Engineer for looking into this!! 

Interface: iOS (iPhone 13 Pro Max) running 15.5;

Interface: T3s (all including table and wall);

Interface: MacOS (Mac Studio) running iPad app

Interface: keypads (wireless keypads and keypad dimmers) with buttons programmed to cycle room presets in room control driver where those presets are these channels (so for example: click button once room should play coffee house but doesn't; click again, should play symphony hall (preset 2) but doesn't; click again, plays 80son8 (preset 3) properly, etc.  Before yesterday morning (when first noticed this issue) everything had been working perfectly and these are used multiple times a day throughout the house.

Director: 3.3.0.628678 running on EA-5

Mobile App Version: 322.23.0.1601

Like @Jeff W, the issue occurs on all interfaces; I'm also happy to send logs if helpful; and I can confirm the issue is with those same channels (Symphony Hall; Coffee House; BPM; and Lithium) at least (haven't checked every channel).  I confirmed the stations work on the Sirius app directly and on vehicles with sirius radios.