sweekley Posted May 31, 2019 Share Posted May 31, 2019 Can someone help me with the replacement driver for the Honeywell Vista 128 BPT Houselogix Driver. This will not work for 3.0 and I have 5-6 locations using this panel and driver. Thanks, Quote Link to comment Share on other sites More sharing options...
chopedogg88 Posted June 1, 2019 Share Posted June 1, 2019 How about the Honeywell 4232CBM driver? that should work as long as you have the 4232 module. Quote Link to comment Share on other sites More sharing options...
sweekley Posted June 1, 2019 Author Share Posted June 1, 2019 Do you know if it works with the Vista 128 BPT? I read that it doesn’t work well with this panel only the BP as the BPT is more of a commercial panel. Thanks for reply. Quote Link to comment Share on other sites More sharing options...
HRT Posted June 1, 2019 Share Posted June 1, 2019 1 hour ago, chopedogg88 said: How about the Honeywell 4232CBM driver? that should work as long as you have the 4232 module. If I remember correctly using this driver shows proper state, but doesn't arm/disarm properly using the c4 interface. Quote Link to comment Share on other sites More sharing options...
msgreenf Posted June 1, 2019 Share Posted June 1, 2019 If I remember correctly using this driver shows proper state, but doesn't arm/disarm properly using the c4 interface.Works perfectly in my houseSent from my Pixel 3 using Tapatalk Quote Link to comment Share on other sites More sharing options...
HRT Posted June 1, 2019 Share Posted June 1, 2019 1 minute ago, msgreenf said: Works perfectly in my house Sent from my Pixel 3 using Tapatalk what model vista do you have? Quote Link to comment Share on other sites More sharing options...
msgreenf Posted June 1, 2019 Share Posted June 1, 2019 21pSent from my Pixel 3 using Tapatalk Quote Link to comment Share on other sites More sharing options...
HRT Posted June 1, 2019 Share Posted June 1, 2019 Just now, msgreenf said: 21p Sent from my Pixel 3 using Tapatalk that one is designed for the 4232cbm. Its been a while but If i remember the 128bpt has a direct rs232 connection and you can also try to hook up the 4232cbm and it almost works with the driver. The job I tried it on last year, waited for another button push after arming/disarming and I think you could work around it by jumping back a page and hitting the enter, but for the homeowner it wasn't smooth. The old ademco driver works, but you don't get the new gui and now 3.0 Quote Link to comment Share on other sites More sharing options...
sweekley Posted June 1, 2019 Author Share Posted June 1, 2019 Yes the 128 BPT has a direct connect 232. That is how we currently have it using the houselogix driver and all functions and status work great. Just not sure what option is best to switch these 5/6 customers to do they have the same functions and status as they do now. Thanks for the reply’s. Quote Link to comment Share on other sites More sharing options...
PKGarcia Posted August 5, 2019 Share Posted August 5, 2019 I am having the same issue here! The Houselogix driver will not work with OS3.0 and they said they will not update it. They are now AVSnap and after I contacted them they said they are interested in updating the driver. So I am trying now with the CBM4232 module. I do have a Vista 128BPT. The issues I am getting up to now: 1. Limited for 3 partitions. Houselogix was up to 8! I have 4 partitions... 2. The variables are most of the time blank, with no information in them. Don't know what is wrong... I am trying to identify if the system was armed STAY or AWAY but the variable is most of the time BLANK. So I cannot trust it! 3. The really bad thing is that I can only get alarm information from the partition the driver is logged-in. Once I log into partition 1, if partition 2 has na alarm the driver does not say! I am trying a lot of diferent configurations but it is quite hard. Anyone can help?? Thanks a lot. Quote Link to comment Share on other sites More sharing options...
msgreenf Posted August 5, 2019 Share Posted August 5, 2019 2. Variables work fine. I use them. Sent from my Pixel 3 using Tapatalk Quote Link to comment Share on other sites More sharing options...
PKGarcia Posted August 5, 2019 Share Posted August 5, 2019 You have mentioned that variables work fine for you. Perhaps you could help me a bit! Which system configuration you use? Panel? Partitions? I am having quite some trouble to make the variables work and to get alarms from partitions that are not logged in. Thanks for all help! Quote Link to comment Share on other sites More sharing options...
Nehsmit Posted August 13, 2019 Share Posted August 13, 2019 I have vista 20p and was working fine but lately not working at all. Upgraded to OS 3. Which driver do I need? Thank you. Quote Link to comment Share on other sites More sharing options...
DLite Posted August 13, 2019 Share Posted August 13, 2019 I am in the same boat -- Honeywell Vista 128BPT plus the same HouseLogix driver as OP; I have delayed upgrading to OS3 because of it. If we got an HSIM unit from SnapAV and used their corresponding Honeywell HSIM driver, would that setup work with OS3? The SnapAV listing still shows the HSIM as compatible with the 128BPT panel, but is it also compatible with OS3? Quote Link to comment Share on other sites More sharing options...
Jeffrey Posted August 13, 2019 Share Posted August 13, 2019 12 hours ago, Nehsmit said: I have vista 20p and was working fine but lately not working at all. Upgraded to OS 3. Which driver do I need? Thank you. Did it ever work for you in OS3? I am delaying upgrading till I know it works. Quote Link to comment Share on other sites More sharing options...
Nehsmit Posted August 13, 2019 Share Posted August 13, 2019 2 hours ago, Jeffrey said: Did it ever work for you in OS3? I am delaying upgrading till I know it works. Still waiting to hear on which driver I need Quote Link to comment Share on other sites More sharing options...
Nehsmit Posted August 13, 2019 Share Posted August 13, 2019 This is the Honeywell module I have from 2012. Added the C4 driver this evening but still no luck. Any other thoughts would be appreciated. Quote Link to comment Share on other sites More sharing options...
Jeffrey Posted August 13, 2019 Share Posted August 13, 2019 Others say it is working no problem with OS3. Although not sure if they have Vista 20 panel. Any thing else change like moving any cables, changing out something, etc?Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Nehsmit Posted August 13, 2019 Share Posted August 13, 2019 2 minutes ago, Jeffrey said: Others say it is working no problem with OS3. Although not sure if they have Vista 20 panel. Any thing else change like moving any cables, changing out something, etc? Sent from my iPhone using Tapatalk Nothing changed. It was recently giving problems with my 800 where if power went out and 800 restarted, it wouldn't reconnect for days. Now on EA-5 Not recognizing at all. Quote Link to comment Share on other sites More sharing options...
msgreenf Posted August 14, 2019 Share Posted August 14, 2019 You can't use the Control4 driver e the houselogix module. You need to use the cbm module from Honeywell with the control4 driverSent from my Pixel 3 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Jeffrey Posted August 14, 2019 Share Posted August 14, 2019 You can't use the Control4 driver e the houselogix module. You need to use the cbm module from Honeywell with the control4 driverSent from my Pixel 3 using TapatalkSo does that mean the houselogix module is dead moving forward? Or can the houselogix module be used with another driver? If this is true, then that’s sad because it works great for me on 2.10. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
msgreenf Posted August 14, 2019 Share Posted August 14, 2019 The houselogix module can only be used w the houselogix driver. As for the future of it I can't comment. You would need to contact snapSent from my Pixel 3 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Nehsmit Posted August 14, 2019 Share Posted August 14, 2019 7 minutes ago, msgreenf said: The houselogix module can only be used w the houselogix driver. As for the future of it I can't comment. You would need to contact snap Sent from my Pixel 3 using Tapatalk So I had the houselogix module and driver and it wasn't working with 3.0. Does that mean I need to now buy the CBM module? Quote Link to comment Share on other sites More sharing options...
Jeffrey Posted August 14, 2019 Share Posted August 14, 2019 I think he’s saying if snap doesn’t update the old houselogix driver you and I are out of luck. Snap doesn’t seem to care about it. Snap bought houselogix and shut it down for the most part even though they said they were still going to sell the HSIM module. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
msgreenf Posted August 14, 2019 Share Posted August 14, 2019 And snap bought c4 so it's a little unclear what they plan to do w this module. I can say that the cbm works perfectly w the free driver and os 3Sent from my Pixel 3 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.