msgreenf

Correct to go straight you have to be on at least 3.3.1. you will need to use the device image updater to update that touch screen first

No. They have gotten pretty strict now. 

I have an extra new version of the 700 if you are looking for a replacement deal 

14 minutes ago, Topfox said:

So looks like Director Restart is what is going on.  Any suggestions on where I go from here?

Need to look at director log at time right before restart and figure out what driver is causing it 

3 minutes ago, Topfox said:

Where is that exposed being able to trigger off the director reboot?

The top of the programming tree. When project loads 

make me an offer!

Make me an offer!

bump

bump

I recommend reaching out to c4 customer advocacy 

Glad it’s GA!  This has been a great release

Highly recommend working with @chopedogg88

What security system? Cuz different security systems support different sensors

They aren't so there must be something else at play here. You need the controller to be re-registered after using device image updater and reloading the project

How did you try the update and not your dealer? I would use device image updater to reimagine the controller then reload project. 

Any dns sinkholijg or web filtering? I bet you are blocking the update servers and the error message just isn't great 

Is your app updated? This was supposed to be fixed

@ChrisHenderson

Android or ios?

Use the taps vs the light turning. This is native control4 capabilities 

1 minute ago, House72 said:

I thought this driver is blocked.

It is

Good! Updating the OS is important. I would update to 3.4.2 now

Yes. A aux and keypad are theoretically the same but with a few major differences the biggest that with a aux if your system goes down it still works. With a keypad on the far end your system needs to be up to work 

1 hour ago, IBZICON said:

Can the C4-KD120 act as a on/off switch instead of dimmer?  I currently have a three-way wire for my garage overhead lights.  I believe that the switch in the garage is a C4-FPD120 which I am considering changing to a C4-KD120.  The 2nd switch for the three-way wiring is a C4-KA.  For this wiring situation can the C4-KA be changed with to C4-KC120277.

In summary current three way is controlled C4-FPD120 and C4-KA, with my thought to install a C4-KD120 and C4-KC120277?  Would this work?  As I can repurpose/reprogram the C4-FPD120 and C4-KA in my project. 

 

Technically no. A dimmer can actually like a switch almost but not fully. 

3 hours ago, molmi said:

Perfect 

 

one question Roku Support mini app settings in c 4?

Yes

4 dimmers and 2 aux left 

31 minutes ago, Double D said:

Stupid question here, but I cannot find the Zigbee ID procedure for the Yale Assure 2 lock that uses the Yale app.  I thought I remember that there is a setting in the app.  Does anyone know what to do on the lock while you have the Zigbee ID window open in composer?

Did you go through the Yale app and set the lock in automation mode so it recognizes the zigbee module?