Topfox

3 hours ago, jebt2921 said:

Could anyone provide help as to why viewing our cameras through this driver and in C4 app are extremely pixelated but in the Hik-Connect app everything is great.

Anything I can look at tweaking in Composer HE to fix?


Sent from my iPhone using Tapatalk

Although shouldn’t be pixelated bad, but C4 doesn’t have limitations on quality it can support. So your Hik vision app is always going to give you the best quality your camera can provide. 

Does Multidisplay driver only allow you to have more than one audio?  Trying to remember. I’ve tried playing with it in my setup a few times and always end up going back to separate rooms for my wall of TVs. I always forget the reasons why I abandon it. 

Personally after playing with both a Touch and a Non Touch I think I like the non touch better. I was a huge fan of the SR260s, so maybe that’s why, but notice some of what others have mentioned when trying a touch. Response time seems slower after selecting things, have to push the buttons harder for it to recognize a button press. We will see how it goes after some firmware updates though. 

Have some custom drivers that I decided to change icons on.  Went through a few iterations yesterday before I landed on one I was happy with.  Everywhere I look (Composer, iPhone, OSG) has the latest icon but the Halo remotes have a version of the icon I tried before deciding on my latest one.  Ive validated all the icon experience images are the same in the driver.  Tried multiple Navigator refreshes, and rebooting the controller, but no resolution.  Does anyone have any thoughts?

1 minute ago, msgreenf said:

Delete. Factory reset remote. And ftus again. 

Thanks. That was my assumption but figured I’d ask. 

How do you switch the default room after the original install. Doesn’t appear to be as easy as directly moving the driver into the new room. It just reverts itself back to the old room. 

I use it and also have 2 Xbox series X. Haven’t had any issues. Is there a reflection that maybe the IR is bouncing off of?  Maybe try some tape over the ir. 
 

Between my 2 Xboxes, though what I do find interesting is that while my IR is in the same general area the IR bud does not work on both if I have them both in the exact same spot in the Xbox. 

3 minutes ago, Topfox said:

@msgreenf Messing around with my system today it looks like Im in the same state.  I have the 4232 driver that is working fine.  I can arm, disarm, see all my zone states in the app and in history, but am unable to program it seems off those zones.  Which drivers are supposed to be added additionally for the alarm to be able to program off the zone states.  Didn't see any mention in the 4232 driver doc, and not seeing anything screaming at me when searching driver database.

Nevermind, I think Ive got it now...I knew I would possibly figure it out right after I ask

@msgreenf Messing around with my system today it looks like Im in the same state.  I have the 4232 driver that is working fine.  I can arm, disarm, see all my zone states in the app and in history, but am unable to program it seems off those zones.  Which drivers are supposed to be added additionally for the alarm to be able to program off the zone states.  Didn't see any mention in the 4232 driver doc, and not seeing anything screaming at me when searching driver database.

I use both Apple Music and (free) Pandora with C4. As some others have stated the Apple Music integration with CarPlay just makes it easy, and then the family plan basically costs nothing. So my wife, kid and I all get unlimited music for less than $20. With that said when it comes to C4 I find myself using my free Pandora account. Just super easy to hit pandora icon and select a genre like Todays hits. 

I use both Apple Music and (free) Pandora with C4. As some others have stated the Apple Music integration with CarPlay just makes it easy, and then the family plan basically costs nothing. So my wife, kid and I all get unlimited music for less than $20. With that said when it comes to C4 I find myself using my free Pandora account. Just super easy to hit pandora icon and select a genre like Todays hits. 

I use both Apple Music and (free) Pandora with C4. As some others have stated the Apple Music integration with CarPlay just makes it easy, and then the family plan basically costs nothing. So my wife, kid and I all get unlimited music for less than $20. With that said when it comes to C4 I find myself using my free Pandora account. Just super easy to hit pandora icon and select a genre like Todays hits. 

I have the triad garden array (8 gsats and 1 in ground sub) being driven by a Crown CDI 2|600. The CDI signal is being fed from an AMS16. Those go around my pool deck, but at one end of the pool I have a pavilion with 6 in ceiling triad speakers. Those speakers are being driver by a Sony AVR, with the input signal also coming from the AMS16. Everything is in sync. Only thing I notice is I have to turn the volume up higher on the AVR than I do on the 70v. 

On 7/4/2023 at 1:59 PM, WhyPhy said:

I think the Furrion TVs are the way to go. They are fairly reasonably priced as outdoor TVs go. More importantly, they have impact-resistant tempered glass screens. And 4-year extended “accident coverage” from Amazon is about $200, which for me is worth the cost if it actually pays out when something breaks. 

Any idea if there is a C4 Driver for these?

If you look at their materials for their 2023 version it says they support Control4, but I haven’t personally looked to see if there is a driver. 

I haven’t seen this specific issue, but I have been having issues with app lag/tracking after it’s been running in the background. When I bring the app back up it will show me one screen and when I go to click on something it will refresh quickly to a different screen which results in my clicking something I didn’t want. Like a new source when I thought I was going to change the volume.  Gets really annoying. 

Not that it bothers me at all, but I have also noticed there seems to be more.
 

Example. If I click on something from the All Activity feed it takes me to a full page ad that I have to close before I’m taken to the post. 

16 hours ago, FlyingDiver said:

One Bond Pro covers the whole house?  Or do you have multiple units?

I have a non-Pro unit which works OK, but doesn't have anywhere near the range to cover the house.

I have it semi centrally located, but yeah it’s covering the whole house end to end 

I have a bond pro. My house is about 7k sq ft and it currently adds automation to about 11 ceiling fans with lights I have inside the house. I don’t really do anything else with it, but overall it has been pretty rock solid. Definitely happy I learned about it so I don’t have dumb fans or didn’t have to replace my fans. 

10 hours ago, dinom said:

And I have Unifi access points and never had and issue with my older NEEO or the new Halo. So I guess it’s really setup dependent. 

Same. I’m all UniFi and although I never had a Neeo, I’ve had zero issues with my Halo.

Sold

Still available. 

Still available

And of course after all my complaining, I go downstairs to try to figure it out some more and now it is showing up..lol.

I think what my issue was is that my PC was showing up twice in my list of Amazon Devices.  I de-registered the older record, and now it shows.  Although before I did that, I was able to see other apps in the Amazon App Store, so still a little weird but hey it is working now.

With that said I still can't get opening cameras beyond the thumbnail view to work.

7 minutes ago, Andrew luecke said:

You need to use the Amazon AppStore, NOT the Microsoft one.. also, guessing you need to install the Android subsystem too? Generally here in Australia though, we're the last ones to get these things 

Yep. Using the Amazon App Store and Android subsystem. Since it wasn’t showing when I search for it, I eventually just downloaded the apk from another site so I do have it running at the moment. It’s just super weird that it isn’t coming up. I do see it if I search for it in the Web version of the Amazon App Store, and it lists my windows device as a compatible device in that experience so yeah totally beats me at the moment. 

7 hours ago, Andrew luecke said:

Looks like its live in Australian Amazon Appstore.. Good riddance to bluestacks.. Really fast too.. Great work guys (this should save some time during development)

Sweet. Ok this is going to drive me nuts on why it doesn’t show up when I search the AppStore. Lol