LollerAgent

Yeah - it's pretty stupid.

How are you implementing the ‘hold for 3 seconds?’

Check out Modern Fan Company. They have nice looking AC fans that will work with the C4/Lutron fan controllers. When you order them, just get the most basic fan controller.

Yeah - I'm just trying to figure out how to use it.

@msgreenf Did you ever end up getting anything? Looking to retrofit a couple of blinds as well.

Do you know if the "no shuffle with Pandora" was ever fixed? I'm just now playing with the driver in 2.10.6 and I don't see a way to shuffle either.. which is sort of a showstopper for me.

So - to follow up here about Spotify: It seems as if you need to create a preset for a playlist in EACH room. So, I have to crete a preset for "My Playlist" in kitchen, master bedroom, etc. This seems weird to me, but once they are created in all rooms, you can select the preset/playlist in the Room Control driver.

Thanks - seems like yet an other limitation of Spotify. Quite frustrating. Were you able to program LED's for each preset as well on your keypad?

Quick semi-unrelated question(s). When I choose Spotify as a preset, I don't get the option to select a playlist (which I have marked as a favorite). Is this expected? If so, Spotify seems sort of useless here. Secondly - how do I connect a keypad button to the actual room control driver after configuring my presets? Does my dealer have to do this, or can I use HE?

Yeah - I read the same article and can't wait until that is available. We are coming from Dish Network, so it's taking a bit of getting used to as well. The ability to use traditional channel/up buttons and have a real guide will be very helpful.

Yeah - it's sort of janky. I'm trying to make it work, but it's hit or miss. I really wish Hulu supported this.

Contra?

I use Hulu Live with a Roku Ultra. Is there anyway to program the Roku to turn on, select Live TV and then select a specific channel? I'm trying to tune to a specific channel as part of my "Good morning" routine.

Got the Phoenix plugs, now I just need rack-ears. Any suggestions?

Sorry - but I only have access to HE. My dealer setup the bindings/connections.

I have a PAMP4 that is missing the rack ears and zone output speaker plugs. Does anyone know where I can get them?

Welp - I didn't realize the AVR had a discrete volume control for ZONE3, so I cranked that up, and the results are much better now, but still lower than I would like.

I'm having the same issue. I have a local 5.1 zone (Denon AVRX4300H) with a turntable. I'm trying to connect the ZONE3 pre-outs on the AVR into an input on my Triad AMS24 so I can listen to the turntable over my WHA matrix.. but the levels are super low. Is there any viable solution for this?

*facepalm* - it was a crossed cable.

I'm looking for the best way program a single "music" button on a keypad. My requirements: I want to be able to launch Spotify in the zone and play a specified playlist with shuffle/random enabled. I want to be able to play DLNA music (random, certain playlist, etc). I want to be able to launch a Pandora station. I want to be able to adjust the volume (up/down buttons). I want to be able to skip the current song (up/down buttons?). If the sound is not currently playing in the keypad's zone, but it is playing in a nearby zone, I want to "join" that zone and start playing/streaming the same source. Given these requirements, how would you program the keypad? Am I missing any obvious requirements? My initial thoughts are to do: Single tap: Spotify playlist Double tap: DLNA Triple tap: Pandora Up/down button press: adjust volume Up/down button hold: skip track I'm unclear on how to handle the "join" situation. Would it be possible to do something like "if no music is playing in zone, hold the Music button for 2 seconds to join nearby zone"? Any suggestions and or tips? Should I be using the room control driver for any of this?

My goal here is to utilize a local Denon AVR zone for WHA. I have a cable connected (using CAT6 and a balun - tested balun is working correctly) from an output on my AMS24 to an input on the AVR. When I choose the room for playback in C4, I can BARELY hear the source coming through my AVR. The input is assigned correctly, etc, but the volume is SUPER low and barely audible. What am I missing here? For testing purposes, I disconnected the output from my matrix and hooked it directly into an iPhone and the audio on the Denon side was fine.

How did this end up for you? I want to use the DLNA driver to access the DLNA server running on my NAS which contains large library of FLAC/MP3. Couple questions for anyone who knows more than I do: Is music served via DLNA available in the "My Music" interface? Is it easy to program a keypad button to start playing music from DLNA in random order? Is it simple to also have a button that skips songs? Can you create custom playlists from music available via DLNA?

You're making assumptions.. and you know what they say about that.

Sure - I'm speculating. But, in my experience, like I said, Snap has been a good partner and I'm hoping they realize this is a big deal for C4 customers and dealers and thus make it a pleasant transition (if it even happens).

Why would it be? The SnapAV stuff has obviously been in the works for a while now, just as the Neeo acquisition (and 3.0) has been.