Carter Hobson Posted March 20 Share Posted March 20 Does anyone know the reason for the official MyQ driver to be disabled currently? I was looking at options for garage doors and came across the Intrinsic Dev official driver for MyQ, however, it seems to be discontinued/disabled for now. https://www.intrinsicdev.com/downloads/official-myq-driver-for-control4/ Quote Link to comment Share on other sites More sharing options...
Topfox Posted March 20 Share Posted March 20 There is another thread on this one. Think we are all waiting to find out what exactly the issue was. There is someone posting in the other thread from the company and mentioned their legal is talking to C4. With that said in the other thread someone modified the driver so it will allow you to install it, and as you can see on the companies website you can still buy a license from them, but it’s definitely at your own risk. While the above works there is no guarantee C4 won’t attempt to do more than they have already tried to prevent its usage. Quote Link to comment Share on other sites More sharing options...
eggzlot Posted March 20 Share Posted March 20 8 hours ago, Carter Hobson said: Does anyone know the reason for the official MyQ driver to be disabled currently? I was looking at options for garage doors and came across the Intrinsic Dev official driver for MyQ, however, it seems to be discontinued/disabled for now. https://www.intrinsicdev.com/downloads/official-myq-driver-for-control4/ Quote Link to comment Share on other sites More sharing options...
BraydonH Posted March 20 Share Posted March 20 Best way we have found to do it is with a Garadget adapter then a relay and contact hardwired into Control4 or a Z2IO https://www.garadget.com/product/security-2-0-dry-contact-adapter/ MyQ drivers have been breaking for year from various developers. Just use a relay and contact. Quote Link to comment Share on other sites More sharing options...
Matt Lowe Posted March 20 Share Posted March 20 We just installed two Ratgdo controllers yesterday. It was fairly painless but you need to have a computer with good USB drivers. a cheap Windows 11 laptop yesterday could not properly connect to them. My more expensive feature-rich model could for whatever reason without having to do anything extra. Driver by Chowmain is fantastic too allow you to setup a lot of features with out any programming needed to be done at all. alanchow and neil12011 2 Quote Link to comment Share on other sites More sharing options...
cnicholson Posted March 21 Share Posted March 21 We all need to Rage Against The Garage Door Opener (company): RATGDO. They are awesome. As @Matt Lowe said, flashing the firmware can be a bit tricky based on what computer / OS you have, but not too bad and a 60 second process once you find machine with right serial driver (my Mac worked). I installed eight of them and so far, so good. Chowmain driver even exposes your garage door’s motion sensor, light and IR beam sensors in C4 as a neat bonus. Highly highly recommend. They are about $45/each (you need one per door opener), plus the driver. Install on opener is pretty fast: insert three wires into your motor unit’s wiring spring-clamps. Works over local WiFi— no cloud component at all. Do it! neil12011, alanchow and Andrew luecke 2 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.