South Africa C4 user

Now this is an interesting question. I have the same issue at one of my residences where one device mysteriously becomes “local host” and 1 or 2 devices that I have deleted still appear in the setup area for notifications (in my.control4.com)…

Hmmm… interesting. My OSDs are taking much longer to load (after refreshing navigators) on OS3.4.1 May well be related. T4s - 40 seconds (OK but was under 30 seconds on OS3.4.0) EA1s - 2 - 5 minutes (compared to under 1 minute on OS3.4.0) EA5 and core 5 - haven’t tested yet but will.

Hmmm - I have a Neeo where the back box has broken (very annoying as I like the Neeo - despite the shortcomings)… I was keen to replace it with a Halo Touch but this doesn’t sound great.

@Andrew luecke

While we are talking about little bugs on the iOS app, let me add one more that arrived recently. The presets (PTZ set-points) for camera viewing have disappeared on the iPad app. If you know where the buttons are, you can still press them but the buttons and text have vanished! As far as I recall this is an iPad issue only (ie iPhone and touchscreens work fine). Sorry for hijacking the thread

Can’t wait!

There are ways to get intercom working on most of these tablets but it is a schlep

I am a big fan of a CA10 so would always recommend this… But, I do think something else is going on here. Zigbee working fine to turn the backlights green but not so fine when turning them white does not make (any) sense (to me) unless something else is clogging things up.

loads of laughs - I know many people will prefer this… but I like(d) the big red 4… I always told people to use this to get started… I have now put a “watch” button on the lighting keypad at my cinema door and tell them to press this and then follow the menus…

Another funny that I’ve had recently when flipping between residences is that my favourite rooms disappear (sometimes)…

Yes, this is pretty easy to do as long as the security syste, has a decent control4 driver.

Weird. I’m not sure if HE is working yet so I haven’t tried logging in to Composer. But I do have a USB on my system which is still working after OS3.4.1. So I assume it is visible I use it for screensaver photos not music, so a bit of a different use case but still a USB.

I haven’t tried it myself but I’ve heard good things about these: https://drivercentral.io/platforms/control4-drivers/utility/axion-lighting-5.5-and-8-android-touch-panels/

Sounds like something else is hanging your system when you close the garage door. Maybe have your dealer check CPU usage when the garage door closes.

I do miss the “4” button on the newer remotes!

I’ve also had an issue recently (4 or 5 times) but only when switching from one property to the other. Closing the app and re-opening it has fixed the problem for me each time.

Sounds like you have night mode (think that is what it is called) enabled. If so, you can disable this in the settings on the Touchscreen itself.

O no! Hopefully there will be a quick fix!

Have you tried a hard reboot of the Director?

The improvement seemed to be there with just the app update although I only used the app once or twice before I had the OS update also.

Interestingly my iPad app is much quicker following the app update. My iPhone app is slower than the iPad (which is strange as my iPad is older and slower generally).

I understand that OS3.4.1 is out. My dealer is updating over night. Anyone know what is new?

The drivers are in the Modbus Suite of drivers if your dealer downloads this from Driver Central. While the main Modbus driver itself is a paid (licenced) driver, the other drivers in this download are free (extra) drivers and that includes the single setpoint thermostat driver.

This will work. I would use (and do use for similar things) a Yatun Single setpoint thermostat driver (this is now a HopSoft driver) and connect it to the Z2IO this gives you normal thermostat control and you can choose your hysteresis in the driver. I think you need a connector driver between the Yatun and the Z2IO. All these drivers are free.

As @C4 User says, most of this is possible (and there are usually various ways of doing it). Grouping sensors - some security system drivers do this for you. Failing this, use the Domosapiens security enhancements driver which allows you to create something like 20 (may even be more) different sensor groups. Timers - what you describe can be done with simple programming or use the Domosapiens Advanced Lighting Timer driver. I have never used the latter (as I set up my own programming before this driver existed) but people rave about it and I have been meaning to try it out for ages. Screens - you will need a separate motion sensor to accomplish what you want. You can then program the screen to jump to a given camera when motion is sensed.