ADITYA DESIRAJU Posted March 31, 2018 Share Posted March 31, 2018 EA1, EA3 AND EA5 DRIVERS REQUIRED Link to comment Share on other sites More sharing options...
SY3 Posted April 2, 2018 Share Posted April 2, 2018 1 hour ago, ADITYA DESIRAJU said: this is just private se for myself for my new residence where all my lighting is run on control 4 relays and dimmers and 7" screen not for any commercial activity.As I mentioned earlier I am not a dealer, this my passion after work hours. You need to work with a dealer. Doesn't matter how much training you received. What you're asking for is very basic stuff that a dealer can help you get started. If you don't want to work with a dealer, you're not going to find what you're looking for here. Link to comment Share on other sites More sharing options...
3D - Benn Posted February 4, 2019 Share Posted February 4, 2019 Funny how you know the exact contents of a entire thread and predict it to a T just after having reading the title. Link to comment Share on other sites More sharing options...
mindedc1 Posted February 4, 2019 Share Posted February 4, 2019 You don't know what you don't know. There are dozens, if not hundreds, of "little things" that you would need to know to make C4 work well. Many of those things are taught in C4 training, many are school of hard knocks. C4 is a super flexible system so you can either make it do a million things right or screw it up a million ways. If you don't know that the EA driver are part of composer, you don't even know where to start. Just like everyone above me said, call a dealer. There are some on this forum that will work with you in a remote fashion (I AM NOT ONE) to help you as a tech savvy homeowner in the most cost effective/flexible way possible. If you are super cost conscious or you want a high degree of control this is a good way to go. You should also consider that you will need some education on how to use composer HE after the dealer finishes his work. I would pay for that time and consider it a training class. There are also a lot of dealers that don't want to get involved in a potential mess with a customer that won't take the dealer's advise. You could be either category of customer, you need to decide which one you want to be. Link to comment Share on other sites More sharing options...
Engineerisaac Posted April 6, 2018 Share Posted April 6, 2018 Sorry Bro. None of us are willing to risk our dealer status and our livelihood in helping, As kind as it may be. We just simply cannot get you access unless you have a dealer account or you work as a Tech under a dealer. Your best bet is to find your friend who is a dealer and ask him. Link to comment Share on other sites More sharing options...
neil12011 Posted April 4, 2018 Share Posted April 4, 2018 Laffs. Link to comment Share on other sites More sharing options...
BuffaloC4 Posted April 3, 2018 Share Posted April 3, 2018 Just keep trying. If you have access to the software you'll eventually figure everything out, except for advanced programming (that's another beast) Link to comment Share on other sites More sharing options...
blub Posted April 2, 2018 Share Posted April 2, 2018 8 hours ago, ADITYA DESIRAJU said: this is just private se for myself for my new residence where all my lighting is run on control 4 relays and dimmers and 7" screen not for any commercial activity.As I mentioned earlier I am not a dealer, this my passion after work hours. And you can do the passion with physically install it on yourself and then call a dealer to set it up via composer and then you can go to composer HE and play with the programming But there is one thing you can't do: Add devices into the control4 system by yourself - you need a dealer for that Link to comment Share on other sites More sharing options...
lippavisual Posted April 2, 2018 Share Posted April 2, 2018 Well your passion will require to call a dealer to add in your equipment, make bindings and config. Link to comment Share on other sites More sharing options...
blub Posted April 2, 2018 Share Posted April 2, 2018 1 hour ago, ADITYA DESIRAJU said: this is just private se for myself for my new residence where all my lighting is run on control 4 relays and dimmers and 7" screen not for any commercial activity.As I mentioned earlier I am not a dealer, this my passion after work hours. To put it simple: Control4 is dealer based, meaning you need a dealer to set up all devices for your project. When done you can program whatever you want via Composer HE Link to comment Share on other sites More sharing options...
msgreenf Posted April 2, 2018 Share Posted April 2, 2018 13 minutes ago, ADITYA DESIRAJU said: this is just private se for myself for my new residence where all my lighting is run on control 4 relays and dimmers and 7" screen not for any commercial activity.As I mentioned earlier I am not a dealer, this my passion after work hours. don't matter Link to comment Share on other sites More sharing options...
ADITYA DESIRAJU Posted April 2, 2018 Author Share Posted April 2, 2018 this is just private se for myself for my new residence where all my lighting is run on control 4 relays and dimmers and 7" screen not for any commercial activity.As I mentioned earlier I am not a dealer, this my passion after work hours. Link to comment Share on other sites More sharing options...
knowitall Posted April 2, 2018 Share Posted April 2, 2018 oh your buddy certified you. Cool. Why does this read like OP is gonna be aaking for bank accounts and SSNs soon Link to comment Share on other sites More sharing options...
South Africa C4 user Posted April 2, 2018 Share Posted April 2, 2018 2 hours ago, ADITYA DESIRAJU said: Correct I had tem earlier, but due to HDD issues , everything got wiped out, so that why I am requesting.I am a trained programmer through another friend who was a control dealer a long while ago, learned some installation but havent kept abreast till now.catching up as I have new system at home and plan to inst all and configure myself, i guess this not wrong The drivers are available in Composer Pro and unless you are a dealer, you are not allowed acces to Composer Pro so would need to find a dealer. QED Link to comment Share on other sites More sharing options...
ADITYA DESIRAJU Posted April 2, 2018 Author Share Posted April 2, 2018 Correct I had tem earlier, but due to HDD issues , everything got wiped out, so that why I am requesting.I am a trained programmer through another friend who was a control dealer a long while ago, learned some installation but havent kept abreast till now.catching up as I have new system at home and plan to inst all and configure myself, i guess this not wrong Link to comment Share on other sites More sharing options...
RyanE Posted March 31, 2018 Share Posted March 31, 2018 6 hours ago, ADITYA DESIRAJU said: EA1, EA3 AND EA5 DRIVERS REQUIRED Yes, they are required when you have an EA-1, EA-3, or EA-5 in your system. They are available to installers as part of the Control4 ComposerPro software of the appropriate version (2.9+, I believe). RyanE Link to comment Share on other sites More sharing options...
msgreenf Posted March 31, 2018 Share Posted March 31, 2018 EA1, EA3 AND EA5 DRIVERS REQUIREDLike for the controllers? They are right there. Clearly you didn't pay attention in training or you have hacked composer proSent from my Pixel 2 XL using Tapatalk Link to comment Share on other sites More sharing options...
Question
ADITYA DESIRAJU
EA1, EA3 AND EA5 DRIVERS REQUIRED
Link to comment
Share on other sites
16 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.