alanchow
-
Posts
4,295 -
Joined
-
Last visited
-
Days Won
216
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Events
Posts posted by alanchow
-
-
11 hours ago, tonysss13 said:
thanks for clarifying Alan
On the top of the driver there is a "use temperature sensor" option however it's greyed out. is there any way of enabling this as it would be handy to use my main room stats
You cannot feed data into sensibo. The driver will however pick up data from senisibos own room sensors. So if you have one set up then the driver will automatically pull the data in. No setup required on control,4.
-
Overview
Chowmain releases Auslock driver for Control4. Auslock is a cutting-edge smart home device designed to enhance security and convenience.
Developed by an innovative company, Auslock provides keyless entry to homes, allowing users to lock and unlock their doors using their smartphones or other connected devices. The lock integrates seamlessly with existing door hardware and can be easily installed without the need for extensive modifications.
Auslock offers features like remote access, temporary access codes, activity logs, and integration with voice assistants and other smart home systems.
With its advanced technology and user-friendly interface, Auslock provides homeowners with a secure and convenient way to control and monitor access to their homes.
Driver Features
- Lock
- Unlock
- Set the Auto Lock Time
- Add, Modify and Remove Users using the Control4 UI
- View the lock's history
-
Available Variables
- Battery level as percentage (which you can use with our Battery Indicator driver)
- Last user as advertised by the lock (including changes outside of Control4)
-
Programming Actions
- Set lock state to Lock, Unlock or Toggle
- Disable Auto Lock
- Set Auto Lock Time
-
Device Specific Events
- unlock by app
- unlock by passcode
- Rise the lock (for parking lock)
- unlock by IC card
- unlock by fingerprint
- unlock by wrist strap
- unlock by Mechanical key
- unlock by gateway
- apply some force on the Lock
- unlock by unlock key
- unlock by hotel card
- Unlocked due to the high temperature
- Unlock with key fob
- Unlock with QR code success
- Cancel double lock
- Lock with QR code failed, the lock is double locked
- Auto unlock at passage mode
- Door unclosed alarm
- Failed to lock
- Face unlock success
- Face unlock failed - door locked from inside
- Face unlock failed - expired or ineffective
- Unlocked by App granting
- Unlocked by remote granting
- Authenticated with App
- Authenticated with passcode
- Authenticated with fingerprint
- Authenticated with card
- Lower the lock (for parking lock)
- lock by app
- open from inside
- Door sensor closed
- Door sensor open
- lock by fingerprint
- lock by passcode
- lock by IC card
- lock by Mechanical key
- Auto Lock
- lock by lock key
- System locked
- Try to unlock with a deleted card
- Dead lock with APP
- Dead lock with passcode
- The car left (for parking lock)
- Unlock with QR code failed, it's expired
- Double locked
- Lock with QR code success
- Failed to unlock
- Lock with face
- Tamper alert
- Remote Control
- received new local mail
- received new other cities' mail
FAQ
Where can i find out more about Auslock?
You can find out more about Auslock including distribution and purchase via the links below.
What are the Requirements for this driver?
- Control4 OS 3.3.2
- Control4 HC Series controllers are not supported. EA and Core controllers are only supported.
- Auslock compatible lock
- Auslock compatible gateway / hub
Why is this product so exciting?
Integration provides the ability to lock, unlock, add/modify/delete users and get feedback on lock state along with events.
Note that a gateway / hub is required for communication to the cloud. Please ensure that you purchase an Auslock gateway / hub and test remotely via their app prior to integration.
What types of locks are compatible?
All of Auslock locks are compatible with our driver. Note you will also need their gateway.
How can we manage access?
The driver will allow you to add / modify / delete users via Control4's navigator interface for PIN codes only. It does not support RFID, fingerprint or other forms of management. You will have to use the official Auslock app if you want to manage non PIN based permissions. The driver will still obtain events from access via these non PIN based access.
Can I manage the Bluetooth, finger print and RFID access via Control4?
No. You will have to use the official Auslock app if you want to manage non PIN based permissions. The driver will still obtain events from access via these non PIN based access.
Do you offer showroom discounts?
We offer dealers a free showroom licence for demonstration and educational purposes. See link below for T&C's and signup procedure.
I want to try this driver out before buying it?
All Chowmain drivers for Control4 come with a 90 day trial.
How do I find out more information about the driver?
Please see the links below for more information about the driver.
-
7 hours ago, tonysss13 said:
Have been using this driver for my LG units. Works really well however for some reason some fan speeds are missing on the C4 app that are showing on the Sensibo App
Also the text is a bit poorly formatted on the C4 app
One thing that would be really handy for those of us with the LG units in the bedroom is to have the light on / off function accessible from C4, as there is no way to permanently switch it off and iluminates the room
works great though will be buying more sensibos for my other units
We automatically import in the HVAC and FAN modes into Control4. Control4 by default has known HVAC and FAN modes. When we issue a known mode it will automatically format it and sometimes applies icons to them as well hence why LOW and AUTO convert to Low and Auto.
In regards to light on / off functions this is not part of the API so we have no control over it.
-
Overview
Chowmain releases Rako driver for Control4. Rako Controls is a leading provider of innovative lighting control solutions. With over 40 years of experience, Rako specializes in creating intelligent systems that allow users to easily manage and personalize their lighting environments.
Their range of products includes wireless dimmers, keypads, and sensors, all designed to seamlessly integrate with existing lighting infrastructure. Rako's systems offer advanced features like scene-setting, scheduling, and remote control via mobile devices, providing users with convenience and energy efficiency.
Whether for residential or commercial applications, Rako Controls' solutions offer flexibility, reliability, and customization, empowering individuals and businesses to create the perfect lighting ambiance while enhancing comfort and reducing energy consumption.
Driver Features
- Automatic discovery of Rako Hubs
- Self healing. (With Auto Discovery, IP Address changes are detected by the driver)
- Auto Setup. (Discover, add, and bind supported device drivers automatically)
- Dynamic Room scenes and scene names. Enables triggering of Rako Scenes with button link bindings or programming and fires Control4 events when scene is triggered allowing for Rako buttons to execute Control4 programming.
-
Control and feedback for
- Room Scenes (this is useful for programming Rako scenes to execute • Control4 Programming)
- Light Rooms and Channels
- Switch Rooms and Channels
- Blind/Curtain Rooms and Channels
- PLM Blind/Curtain Rooms
- RGB Lighting
- Color Temperature Lighting
FAQ
What are the Requirements for this driver?
This driver is designed for IP control over the RK-Hub and WK-Hub and requires firmware version 3.7.0+ installed to be compatible with the driver. Please make sure that the firmware is up to date and the Rako system is setup prior to installation of the driver.
What hardware will this work on?
The RK-Hub or the WK-Hub
Why is this driver exciting?
- One click auto-setup. Discover, add, bind, rename drivers automatically.
- RGB and CT lighting support.
- 2-way feedback for Rako Room Scenes. Trigger scenes via Control4 or have Rako trigger Control4 automation through programming.
What's the difference between this driver and the ones found on the Control4 online driver database?
- Quick commissioning into Control4 with Auto discovery and Auto Setup.
- Consolidation of drivers which support rooms and channels. Rako room scenes are also brought in.(Hub, Blinds, Lights, Switch, RGB, and Color Temperature)
- RGB and Color Temperature support with OS3.3+.
Want to know more about Rako Controls?
Find out more about Rako Controls here: https://rakocontrols.com/
I want to try this driver out before buying it?
All Chowmain drivers for Control4 come with a 90 day trial.
How do I find out more information about the driver?
Please see the links below for more information about the driver.
-
On 6/23/2023 at 1:38 AM, GLOBATEK said:
Hi,
Do you know if the Daikin WiFi Split driver work with the new Daikin CIRRA series(CTX12AXVJU) with the optional WiFi dongle (AZAI6WSCDKB S21 adaptor)?
Thanks,
Nicholas Gauthier
This will not work. Given it has a S21 port i would recommend installing either an IntesisBox (model below) or a Daikin BRPxxxAxx / BRPxxxBxx model adapter. Recent C model adapters are cloud only which our driver does not work with.
On 6/24/2023 at 5:14 AM, YseanY said:Alan, any chance something is in the works for Samsung split units with wifi modules (remotely controllable in Smartthings)?
This is not in development. Also note that we usually do not pre-announce what we are doing as we don't want people to commit to hardware choices before we finish a driver (sometimes driver projects get abandoned due to circumstances).
48 minutes ago, DLite said:Our HVAC guys apparently prefer to install a Mitsubishi Electric mini split. The model number they proposed is compatible with the Intesis module linked to above. I see Intesis has a "universal" module and a "brand-specific" module. Am I correct that the universal module is the only option of that two that allows me to use either the Mitsubishi's factory remote or Control4, where there is feedback to Control4 even from the factory remote?
There are multiple IntesisBox models. You need to make sure it is compatible with home automation protocol (this is their local protocol) and not their AC or ST Cloud integrations.
Basically if you can control it without a control system (ie via an app on your mobile device directly) then it is AC or ST Cloud and cannot be integrated into Control4.
Compatible models listed below.
https://www.intesis.com/products/ac-interfaces/wifi-gateways
-
8 minutes ago, rjrjrj said:
Thanks for that, we're not officially a dealer as far as I know (we have had a fair bit of contact with someone at C4 regarding our project though).
AddDevice works for me for everything I have, it just doesn't work on this Core5 with perhaps a specific hierarchy that I haven't seen - which isn't particularly surprising - we're dipping our toes in.
I know there are separate versions of the call if the device is going into a Room. There isn't a lot of guidance in the driverworks doc for why it might fail.
I assume you've signed up as a Control4 SDK Licence agreement?
The licence agreement gives you access to all the driver development resources we (and other developers have) including official developers support.
Snippet from https://github.com/snap-one/docs-driverworks below
QuoteThe above components play an important role in ensuring that your driver has complete integration within the Control4 O.S. Use of them requires signing Control4's SDK License Agreement. For more information regarding the licensing agreement, please contact us at: busdev@control4.com.
-
Major Update
New Devices include
Switchbot Indoor/Outdoor Thermo-Hygrometer
- Used with the Control4 temperature display driver to show temperature/humidity updates.
- Program events based on temperature/humidity changes.
- Used with the Control4 temperature display driver to show temperature/humidity updates.
- Program events based on temperature/humidity changes.
- Ambient Light level changes.
- Configurable thresholds of Bright, Dim, and Dark zones.
- Programmable events based on configured zones. (Bright, Dim, and Dark)
- On/Off control.
- Programmable variables of voltage, current, power consumption, and electricity used in the day.
Switchbot Contact Sensor (REQUIRES WEBHOOK setup on Agent) (Requires port-forwarding)
- Generic contact sensor binding for open/close state.
- Programmable light level changes. (Bright and Dim)
- Programmable Contact Opened/Closed/Left Open events.
- Programmable Entering/Exiting events.
Switchbot Motion Sensor (REQUIRES WEBHOOK setup on Agent) (Requires port-forwarding)
- Programmable light level changes. (Bright and Dim)
- Motion events.
Version 20230622 - 22-JUN-2023
- Add ability to change blind tilt and curtain toggle behaviour.
- Add support for Switchbot Hub 2, Indoor/Outdoor Thermo-Hygrometer, Plug mini(US) devices.
- Add support for Switchbot Contact and Motion sensor devices. (REQUIRES WEBHOOK setup on Agent) (Requires port-forwarding)
- Add Webhook support for Hub 2, Meter/MeterPlus, Lock, Bot, Plug devices.
- Add Temperature and Humidity variables to Meter driver.
- Add 'Last Message' property to all drivers to show any possible errors.
- Add Auto Rename capability.
- Improve command processing in Switchbot Agent.
-
-
3 hours ago, Kaas Mayer said:
same question here. found a free driver for german sky q but i would prefer the chowmain one with Channel lists. Checked the UK driver but i only receive uk channels.
@alanchow can we help to accomplish this to the german channels aswell?
There is no API data source we could grab the channels from
-
10 hours ago, SMHarman said:
Hi Alan,
I'll ask here as others may benefit from the answer.
So I have two heat solutions in my home and while I was using IFTT for the switch over that is now paid so I am looking for a C4 integrated soluition.
Backup heat (and hot water) is Oil controlled by ecobees (2 one per floor) and that is nicely integrated to C4
Primary Heat/Cool is a Mitsubishi Minisplit system with Kumo Cloud (no integration to C4 at present)
This is a second home that is also rented to weekly tenants during parts of the summer so needs to be simple / room control level control for the cool during that time.
So what would be the best / the option of the ones you propose above as part of making all that work inside C4 and probably keeping the IR remotes so the rental residents have a stick to point at the device just like they are used to and not needing me to install lots of touch screens or something to replace them (have guests break etc).
Thanks,
We don't have a driver for Kumo cloud. At this stage we recommend replacing the module with an Intesis.
Having said that we would love to give Kumo cloud a shot to see if we can integrate it. We would need remote access to your Control4 system and need your Kumo Cloud username and password as well to do the development.
No promises on if we can actually achieve it or not.
-
We have several drivers that control split systems.
- Daikin (with certain wifi BRP modules) works out of box with this driver - https://chowmain.software/drivers/control4-daikin-wifi
- Sensibo is a universal IR based controller - https://chowmain.software/drivers/control4-sensibo
- Tado is a universal IR based controller (they also have TRV controllers too) - https://chowmain.software/drivers/control4-tado
-
Intesis has both universal IR controllers and brand specific bi-directional controllers - https://chowmain.software/drivers/control4-intesisbox
- Daikin Split Controller - https://www.intesis.com/products/ac-interfaces/wifi-gateways/daikin-ascii-wifi-ac-dk-ac-wmp-1?ordercode=INWMPDAI001I000
- Fujitsu Split Controller - https://www.intesis.com/products/ac-interfaces/wifi-gateways/fujitsu-ascii-wifi-fj-ac-wmp-1?ordercode=INWMPFGL001I000
- Mitsubishi Electric Mr Slim / City Controller - https://www.intesis.com/products/ac-interfaces/wifi-gateways/mitsubishi-electric-ascii-wifi-ac-me-ac-wmp-1?ordercode=INWMPMIT001I000
- Mitsubishi Heavy Industries Controller - https://www.intesis.com/products/ac-interfaces/wifi-gateways/mitsubishi-heavy-ascii-wifi-ac-mh-ac-wmp-1?ordercode=INWMPMHI001I000
- Panasonic Etherea Controller - https://www.intesis.com/products/ac-interfaces/wifi-gateways/panasonic-ascii-wifi-ac-pa-ac-wmp-1?ordercode=INWMPPAN001I000
- Universal IR Controller - https://www.intesis.com/products/ac-interfaces/wifi-gateways/universal-ascii-wifi-ac-is-ir-wmp-1?ordercode=INWMPUNI001I000
-
23 hours ago, Technomage said:
@alanchow Will the driver work with the new Ultion Nuki Plus (with built-in WiFi and bridge), or do I still need to purchase the additional bridge?
Please reach out to brisant secure about the ultion products. They will be able to advise.
-
Overview
Chowmain releases Axis IP camera driver for Control4. Axis enables a smarter and safer world by creating solutions for improving security and business performance. As a network technology company and industry leader, Axis offers solutions in video surveillance, access control, intercom, and audio systems. They are enhanced by intelligent analytics applications and supported by high-quality training.
The driver offers live streams on navigator along with PTZ functionality. On top of this the driver provides the ability to attach snapshots to Control4 Push Notifications (4sight required). Tie this in with the camera's motion events and your customer can get notified (with an image) if the camera detections motion
This camera also provides live feedback of events which is useful if you want to tie in lighting to motion and other events
Driver Features
- Integrate Axis cameras into Control4
- Supports PTZ & Non PTZ Cameras
- View live camera stream on Control4 interface
- PTZ control (Up, Down, Left, Right, Zoom)
- If an IP camera contains multiple image sensors, you can specify the sensor you want the driver to access
- You can specify the resolution you want the driver to provide to Control4's UIs
- The driver can receive events preconfigured in the camera like motion events which you can program against
- Control4 Push Notification Snapshot Support (push notification photos to mobile phones)
FAQ
Where can i find out more about this product?
You can find out more about the Axis IP Cameras through the Axis website.
What products will this work for?
This will work with Axis Communications range of IP cameras that support the Vapix version 3. Usually firmware version 5.40 onwards support. Please test prior to licence purchase.
What cool functions can we do with this driver?
- This driver provides the ability to attach snapshots to Control4 Push Notifications (4sight required). Tie this in with the camera's motion events and your customer can get notified (with an image) if the camera detections motion
- This camera provides live feedback of events which is useful if you want to tie in lighting to motion and other events
Can I access cameras physically connected to an appliance, such as the S20 series?
No. Unfortunately, the ports on the back of an appliance are not reachable via the rest of the network.
I want to try this driver out before buying it?
All Chowmain drivers for Control4 come with a 90 day trial.
How do I find out more information about the driver?
Please see the links below for more information about the driver.
-
Overview
Chowmain releases Sensibo Elements integration for Control4. The Elements device is a temp/humidity monitor and air quality meter featuring a CO2 sensor, PM2.5 monitor, dust particle detector, and pollution indicator that analyzes pollutants in the air you and your family breathe. Equipped with a smart LED light, the Elements air quality monitor will change from green to orange to red, indicating how clean the air is.
Our homes are filled with millions of invisible particles. While most are harmless, some can cause recurring headaches, allergies, or even illness. Automate any Control4 integrated HVAC system, air filtration system or ventilation to help manage and improve on the air quality in the home.
Integration of the Sensibo Elements device to Control4 will help monitor, notify and manage based on TVOC, CO2, PM2.5 Ethanol, Temperature and Humidity values.
Haven't used Sensibo before? Our Sensibo integration also includes integration to Sensibo Air, Sensibo Sky and Sensibo Pure.
The Sensibo Air & Sensibo Sky makes your existing air conditioner smart and connected! Sensibo is an external device that you pair your remote controlled air conditioner with. Sensibo will work with the majority of infra-red based HVAC systems whether it is a mini split, window AC, ductless, portable, heat pump and even central air conditioners
The Sensibo Pure is the world's most advanced smart air purifier that will keep you healthy and energized. Sensibo Pure has a built in sensor measuring your indoor air quality providing feedback on good, modern or unhealthy air. It is equipped with specially designed strong HEPA & Carbon filters, removes particles as small as 0.1um and protects against viruses, bacteria, dust, smoke, bad odors.
Driver Features
- Webview driver to show the Overview and Historical data of the different elements. (Air quality, tvoc, co2, pm 2.5, ethanol, or humidity)
- Dynamic Icon display of monitored element's state (Good, Moderate, Poor). Choice of 2 different icon styles.
- Ability to choose which element the icon's state represents.
- Programmable Events for the different thresholds of the elements. (e.g. Good, Moderate, Unhealthy Air Quality etc) (Thresholds taken from Sensibo App)
- Automatic Email and Push notifications on all events (NOTE: Requires 4sight subscription) (Easy setup from driver properties)
- Programmable variables that track the exact readings.
FAQ
Where can i find out more about this product?
You can find out more about the Sensibo Elements product through their product page.
https://sensibo.com/pages/sensibo-elements
Why is this exciting?
Sensibo Elements Indoor air pollution has been linked to reduced energy levels and focus. Energize your life by unlocking the power of cleaner air with Sensibo Elements.
An easy to setup device that monitors the individual elements that make up the overall indoor air quality in a room. Detect harmful airborne contaminants in your air and protect your family from the effects of breathing dangerous gasses, dust, wildfire smoke and allergrns. Get detailed readings from elements in the air like TVOC, Co2, PM 2.5, Ethanol, temperature, and humidity.
Integration into Control4 allows integrators to automate filtration, venting and air circulation based on various good, moderate or bad air quality values.
I want to try this driver out before buying it?
All Chowmain drivers for Control4 come with a 90 day trial.
How do I find out more information about the driver?
Please see the links below for more information about the driver.
- Andrew luecke and Amr
-
2
-
Overview
Chowmain releases FREE manufacturer sponsored BREL HOME driver for Control4. The BREL HOME Program brings the automatic power of window decoration and sun shading to your home.
BREL HOME has a comprehensive range of motors for a variety of window decoration and sun shading, including Roller Shades, Roman Shades, Honeycomb Shades, Cellular/Pleated Shades, Triangle Honeycomb, TDBU pleated, Awnings, Screens, Double rollers, Curtains, Roller shutters, Roof rollers, and many more which we can motorise.
One of the unique features of BREL HOME is the BJE24TR (made in collaboration with Benthin). This motor has been specially developed for angled windows (pictured), so that they can be fitted with pleated blinds. The Triangle motor ensures that the intermediate bar of the pleated blind first goes down until it is horizontal. Then the bottom bar will drop to the end position. This prevents the angled blind from getting stuck in the window.
The system also includes a Wi-Fi bridge, which enables mobile app control and doubles as a bridge for integration with third party control systems like Control4 for all our motors with up / down / stop, position and tilt based control.
Driver Features
- Automatic import of shades for the correct featureset
- Uni Directional Shade Driver (One Way Driver) - Up, Down, Stop
- Bi Directional Shade Driver (Two Way Driver) - Up, Down, Stop, Position
- Bi Directional Tilt Shade Driver (Two Way Driver) - Up, Down, Stop, Position, Tilt
- Bi Directional TDBU (Top Down, Bottom Up) Shade Driver (Two Way Driver) - Top Motor & Bottom Motor Up, Down, Stop, Position
- Bi Directional Triangular Shade Driver (Two Way Driver) - Up, Down, Stop, Position
- Battery mAh feedback for bi-directional motors with batteries installed.
- Ability to specify low battery mAh
- Event fire on low battery
- Automatic email notifcation on low battery (requires 4sight)
- Automatic push notification on low battery (requires 4sight)
FAQ
About Brel Home
Brel Home is a Dutch company specialized in drives and controls for both indoor and outdoor sun protection.
With more than 50 years of experience in the industry, founders Reinoud Arts and Erik Budding have set a goal with Brel Home to make home automation for sun blinds affordable and accessible to everyone.
You can find out more about Brel Home via their website
How much does this driver cost?
This is a manufacturer sponsored driver and is released for FREE
What does this work for?
This will work for all your Brel Home products. Note it is important to select the right WiFi Bridge model (see below).
What is the difference between the different bridge models?
The hub Hub-02 is for both mono and bi-directional motors. Hub-01 and Hub-03 is for bi-directional motors only.
Does this device provide two way control?
This driver will provide bi-directional control and feedback over blinds / curtains that have two-way feedback. If the motor is uni directional only the driver will assume the last state sent is the current state. Note that the USB hub Hub-01 and Hub-03 is for bi-directional motors only and will not work for uni directional motors.
How doe Uni Directional Drivers work?
Uni Directional Drivers have up, down and stop commands only. There is no feedback on the driver. Note uni directional motors are only supported by the WiFi Bridge DD-7002B model.
How does TDBU Drivers work?
TDBU drivers have two proxies associated. One for the top and one for the bottom. The top motor closes when it goes up and opens when it goes down. The bottom motor does the opposite and closes when it goes down and opens when it goes up. Also note that if the top motor goes below the bottom motor’s level it will force the bottom motor to move to the top motors desired level. This happens in reverse when the bottom motor goes above the top motor’s level as well.
How does Tilt Drivers works?
The Tilt driver has two proxies associated. One for the position and one for tilt. Note that on some motors tilt is driven by a single motor and as such tilting the louver will cause the main position to shift slightly between 95-100%. This is normal behavior.
How do Triangular Motors work?
Triangular drivers have one proxy representing two motors. One for the top and one for the bottom.
The description below shows the positions of the motors at different levels.
- Position A (Top Fully Open, Bottom Fully Open) – Control4 100% level
- Position B (Top Fully Closed, Bottom Fully Open) – Control4 50%
- Position C (Top Fully Closed, Bottom Fully Closed) – Control4 0% level
How do I find out more information about the driver?
Please see the links below for more information about the driver.
-
On 5/18/2023 at 1:48 AM, Cyknight said:
Good question. @alanchow@Andrew luecke
We have had to remove the Zappiti driver for sale due to firmware issues breaking integration (in particular library based browsing and playback).
This issue happened in Q3 2022. Zappiti is aware of the issue and have been trying to resolve it.
If this issue gets resolved we will resume sales.
At this point in time if you have a working Zappiti integration do not upgrade the firmware.
-
Overview
Provision ISR is a leading provider of professional video surveillance solutions. With a focus on innovation and advanced technology, Provision ISR offers a wide range of high-quality surveillance cameras, recorders, and accessories.
Their product portfolio includes IP cameras, HD-TVI cameras, NVRs, DVRs, and video management software. Provision ISR's solutions cater to various industries and applications, including commercial, residential, retail, and public sectors.
The company's commitment to delivering reliable and efficient security systems has earned them a reputation for excellence in the industry. Provision ISR continues to develop cutting-edge products to meet the evolving needs of the surveillance market.
The Provision ISR driver for Control4 will allow integration of Provision ISR IP cameras directly connected to a Provision ISR NVR. Note it will not work with cameras direct.
Driver Features
Compatible with Provision ISR cameras connected to Provision ISR NVR (not compatible direct)
Navigator User Interface
-
Camera (NON PTZ)
- Zoom In
- Zoom Out
-
Camera (PTZ)
- Up
- Down
- Left
- Right
- Zoom In
- Zoom Out
- Presets (statically defined to 10)
Programming Actions
- Auto configure the sub stream for Control4 usage (does not change the Main stream)
Programming Commands
- Up
- Down
- Left
- Right
- Zoom In
- Zoom Off
- Focus Near
- Focus Far
- Preset
FAQ
What products will this work for?
This will work with Provision ISR cameras connected to the rear of a Provision ISR NVR. It will not communicate to cameras directly.
How much does this driver cost?
This driver is FREE and sponsored by Provision ISR
How do I find out more information about the driver?
Please see the links below for more information about the driver.
-
Camera (NON PTZ)
-
4 hours ago, MikeR said:
I have a client with the new ATT/DirecTV stream boxes, the Osprey C71KW. It is said to be an Android TV device. Can this driver be used with these boxes? Additionally, our client would like channel favorite buttons to go directly to channels of their linking. Is that possible with this driver? The closet where these boxes are distributing from does not have a controller so we are hoping the IP driver will work for these.
We have had feedback that it works with DirecTV. Having said that it will not go direct to channels. Please utilise the 90 day trial before licence purchase to make sure it meets your expectations.
-
8 hours ago, C4 User said:
I know this is off topic but is the elk m1 gold a diy system? Meaning can I as homeowner install and program the system? I currently have the DSC Neo that I plan to replace.
It is not a DIY system.
-
Overview
Chowmain releases new ELK M1 security panel driver for Control4. This driver is a brand new driver we have written from the ground up that is even better than the original M1 driver we wrote two years ago. This new driver utilises the same licencing as the original driver and as such comes at no additional cost to existing licence holders.
Elk's M1 Controls incorporate security, fire, door entry control, and energy & task management to provide total control of home or business. By working with products from over 50 partner manufacturers the M1 Gold offer a truly integrated solution. These IP accessible systems offer simple, yet powerful on-site and remote user interfaces, giving the consumer full control anytime, from anywhere.
The Chowmain M1 driver for Control4 offers extensive integration of the M1 functionality to truely expand Control4's functionality to not only security based services but also occupancy and input/output expansion for automation tasks and is compatible with both Ness and ELK M1 systems.
The Chowmain ELK M1 driver is compatible with both Ness M1 and ELK M1 systems via RS232 or IP connectivity (requires optional ELK-M1XEP Module)
Driver Features
End User Interface Features Include
- Full support for all 8 areas
- Large variety of arming modes - Away, Stay, Stay instant, Night, Vacation, Disarm
- Bypass/unbypass functionality
- Alarm Code change function (Can be disabled by Installer)
- Virtual Function Button Support - F1,F2,F3,F4,F5,F6
- Fire, Panic, Police and Medical Emergency functionality built into alarm (Requires configuration and testing by Installer).
- Invalid User Code Feedback
- Both detailed and simple Zone feedback options, with zone list
- Visual feedback of Warnings and Trouble
- History support with custom driver for display of alarm logs
- Output Control and Feedback for all outputs (requires configuration by Installer)
Installer Features Include
- Huge Library of events including Trouble, Function Key Feedback, Tasks and Keypad Accesses for Door Access
- Control and feedback of Function Keys via Configurable Keypads or Experience buttons (via BUTTON_LINK / CONTACT_SENSOR)
- Quickly Configure Push/Email notifications for major events
- Alarm State Events, including an improved Alarm Event.
- M1 and M1XEP version Feedback
- Powerful logging functions via Control4 Composer History
- User Accessible Alarm Code Modification (can be disabled by Installer).
- M1 Counters (Requires Manual Polling by Installer)
- Automatic Clock Sync
- Temperature integration
- Basic support for M1 Lighting. Lights, Relays and Dimmers integration via M1 for greater integration and Advanced Lighting Support.
- Zone integration via Contact Closure
- Advanced system to allow override of arming modes using custom programming or prompt for custom PIN number
- Prompt for Custom PIN for custom commands
-
Powerful Commands are provided including:
- Activation of Tasks
- Bypass Zones. Unbypass Zones or partitions.
- Change User Code
- Display Text On Keypad
- Function Key Presses
- Polling/Writing of M1 Counters
- Speak Phrases or Words
- Panel Clock Sync
- Toggle Outputs
- Zone Triggers
FAQ
What are the benefits of the V2 driver over V1
The list of benefits is huge, but, here are some of the major ones
- New History / Log Interface Driver. View ELKRP Logs in realtime.
- Completely rewritten communications system with huge benefits improving reliability and speed
- Optimised for Core Controllers (or later) and CA-10. These Controllers are even faster
- First time load is now significantly better on all controllers
- Output bindings are named
- Interact with your Keypad Function buttons in new ways using our new Button Links + Keypad Illumination bindings
- Use Custom Ports. 2101 is no longer required
- Huge List of New variables. Virtually limitless programming options available
- Custom arming modes system.
- Arming now detects open zones
- And lots more
Why was the ELK Lock Driver Removed in V2?
- The ELK Lock Driver requires a rewrite, and is not compatible with the new V2 driver. There is no ETA for its return. We recommend using the Door Access Events and Access Users in ELKRP instead.
Can I automatically upgrade between V2 and V1
- Due to the major upgrades between V1 and V2, the driver upgrade is a manual process, as the drivers are designed differently.
- The lighting drivers hare compatible with both V1 and V2, and the connection can simply be moved to the new driver.
What cool things can driver do?
- If you are using RS232 based communications the clock on the keypads usually drift after a while. The driver will automatically sync the clock to the controller's time so that it will always be accurate.
- The driver provides push and email notificaitons without programming for all major events. This is useful for the home owner to know who armed or disarmed the area.
- Keypad bindings for keypad function buttons and RF keyfob buttons makes it easy to program the driver.
- History Driver allows the customer and Installers to review whats happened in their home easily without ELKRP.
- Perform custom arming for different arming modes. Instead of arming Vacation mode for instance, you can turn off the house, provide feedback to the user and then execute a task on the panel, for it to perform additional tasks before executing vacation mode
- Provide Experience buttons which utilise the Keypad Function Illumination feedback to trigger actions on the alarm. Or even bind function buttons on the keypads to Configurable keypads
What module is required to connect to the panel via network
- Whilst this module supports serial, we recommend the use of IP, using a M1-XEP module which also helps facilitate reconfiguration of the panel locally or remotely (with port forwarding or a seperate VPN server/router), without the requirement to disconnect the Control4 system. Keep in mind, whilst connected in ELKRP, Control4 cannot connect properly to the Ness M1, but will automatically try to reconnect after ELKRP has disconnected
- The C1M1 has not been tested by Chowmain, but we have been provided feedback by users that it does operate
I'm typing the correct code, however, disarming or arming does not operate
- In ELKRP, ensure that the "Access" permission is unticked for the user.
- "Access" is used for door access controls instead of arming / disarming and when enabled, will treat the code as a door access attempt should not be enabled for general alarm usage or most installers.
- If Access permissions are granted, attempts to arm or disarm the system from Control4 will not disarm the system, but instead incorrectly trigger a door access event instead.
I'm getting Keypad doesn't exist errors
Ensure every partition you control has a NESS keypad available for control4
There is missing information in the M1 interface (Zones improperly named, or other information missing).
Re-Run Auto-Setup. It may have been incorrectly interrupted
Auto-Notifications are not sending.
- Auto-Notifications requires a 4Sight subscription.
- Check Spam.
- Check that your panel has been set up properly
When executing programming commands, the client is notified of "SAFE MODE" errors.
Use of Bypass, Unbypass and Arming commands require SAFE Mode to be disabled by the installer. For more information, on SAFE MODE, refer to Quickstart information provided with the driver or the full driver manual
Do you offer showroom discounts?
We offer dealers a free showroom licence for demonstration and educational purposes. See link below for T&C's and signup procedure.
I want to try this driver out before buying it?
All Chowmain drivers for Control4 come with a 90 day trial.
How do I find out more information about the driver?
Please see the links below for more information about the driver.
-
Overview
Chowmain releases Fujitsu General anywAir driver for Control4. Manufactured by Fujitsu General Australia the anywAiR technology ducted controller provides Wi-Fi control for Fujitsu ducted air conditioning systems via a wall mounted touch pad. Remote access is available using the anywAiR app, giving control of your ducted system anytime, anywhere with selected smartphone and tablet devices.
This driver will communicate to the anywAiR ducted system providing two way control/feedback allowing Control4 to interact with anywAiR enabled Fujitsu ducted HVAC systems. Control4 driver functionality includes:
Driver Features
- Two way IP control
- Room temperature feedback (if sensor installed or from Control4 Z2IO)
- HVAC mode, Setpoint and Fan control
- Fresh Air control
- Timer functionality (Turn on/off AC after x minutes – upto 12 hours).
- Built in Scheduling
- Built in Presets
-
Control of each zone attached
- Set as Main Zone
- Zone can be turned on/off
- Zone temperature feedback (if sensor available in zone. Note if no sensors are installed Control4 will not receive temperature feedback)
- Zones can have airflow control (for those without temperature sensors)
- Zones can have setpoint control (for those with temperature sensors)
FAQ
What models does this support?
Please visit the anywAIR website for compatible units. https://www.fujitsugeneral.com.au/anywair/ducted
Where do I buy an anywAIR from?
You can find out more information about anywAIR from the Fujitsu General Australia website
https://www.fujitsugeneral.com.au/anywair/ducted
Do i need the Fujitsu touch pad?
Yes our driver communicates to the anywAIR system via the touchpad. It is important that it is installed somewhere in the home.
Does this driver support zones?
- This driver will support zone dampers plus temperatures for those zones.
- The driver automatically imports in all zones and will allow you to either control the setpoint or control the airflow percentage. One zone should be set as Main Zone so that the HVAC system has a reference point.
Why doesn't Control4 display a room temperature or displays 49 degrees?
You need to set a zone with temperature sensor as Main Zone. By doing so this becomes the reference point used by the HVAC system.
Can i schedule the HVAC system using this?
Yes our driver has built in presets and scheduling. The driver can also utilise the built in timer to turn on and off anywAiR.
Does this work with AnywAiR split systems?
This driver will not work with anywAiR split systems. It is only compatible with anywAiR ducted systems with the wall mounted touch pad.
I want to try this driver out before buying it?
All Chowmain drivers for Control4 come with a 90 day trial.
How do I find out more information about the driver?
Please see the links below for more information about the driver.
-
Overview
Chowmain releases Sonoff driver for Control4. Sonoff is a manufacturer of smart home devices that provides affordable and easy-to-use solutions for home automation. Sonoff device integration to Control4 includes smart plugs, switches, RGB/CT lighting and more. This driver package includes support of Sonoff devices in DIY-mode (LAN control) or eWelink-mode (Cloud control of devices added using the eWelink app) for bi-directional control and feedback.
Sonoff Wi-Fi devices are extremely affordable with relay device pricing starting from $5.00 USD, bulbs from $9.00 USD and smart plugs from $12.00 USD.
No additional hardware / hub required. Just connect directly to your Wi-Fi network and off you go.
Driver Features
- Two way control (instanteous control/feedback)
- Auto-discovery of devices (Sonoff DIY-mode and eWelink)
- One plug/switch driver for supported 1-4 channel devices (eWelink)
- Support for other branded products compatible with the eWelink app. (1-4 channel device types)
- Native Control4 color wheel/temperature control
- Daylight agent support
eWelink Agent
- LAN Local discovery of Sonoff devices setup in DIY mode
- Cloud discovery of compatible Sonoff/eWelink devices enrolled into eWelink account.
eWelink Plug/Switch driver
- Support for 1-4 channel plugs/switches.
- Discrete trigger of each channel programmatically.
- Optional Light or Relay bindings created dynamically.
- Programmable device Offline/Online events.
- Auto Rename driver
eWelink LED Bulb driver
- Dynamic capabilities based on LED bulb type. (RGB + CCT) or (RGB Only).
- Full native Control4 color wheel and temperature control.
- Programmable device Offline/Online events.
- Auto Rename driver
eWelink Non-Dimmable Light driver
- Optional driver to be used with the eWelink Plug/Switch drivers to represent a light in Control4 Navigators
Sonoff Plug/Switch driver (DIY mode)
- Auto IP Address configuration
- Adjustable Command Delays
- Adjustable device poll times
- Adjustable Device Power on state and Switch configuration
Sonoff LED Bulb driver (DIY mode)
- Auto IP Address configuration
- Adjustable Command Delays
- Adjustable device poll times
- Full native Control4 color wheel and temperature control.
FAQ
What Sonoff products are supported with eWelink (Cloud)?
The below products have been tested:
The below products have NOT been tested but may work:
- S26R2
- S31 & S31 LITE
- S40 & S40 LITE
- S55
- RFR2
- MINIR3
- MINIR4
- TX Series Smart Wall Switches
- M5 Series Smart Wall Switches
- IW100/IW101 Smart Wall Switches
- Any other branded products that are eWelink compatible and works similar to the above products.
What Sonoff products are supported with DIY mode?
Why are these products so exciting?
- Extremely affordable.
- A controllable 5V/2.5A USB Smart Adaptor to schedule device charging times, turn on/off your USB powered devices etc.
- Great form-factor switches which are easily retrofittable to give you 1-4 channels of controllable loads. Their smallest switch is 33 x 39.5 x 16.8mm.
- All Sonoff plug/switch devices have configurable "inching" times which is a built-in off timer. (5 seconds - 59 minutes 59.5 seconds).
- All Sonoff plug/switch devices have configurable "Power On State" configurations. This is useful for power events to ensure the channels always come back in a "On, Off, or previous state".
Is an active internet connection required to use this driver?
If you are integrating devices linked to an eWelink account, an active and stable internet connection is required. If you are integrating Sonoff devices configured with DIY mode, these DO NOT require an active internet connection.
Where can I buy Sonoff/eWelink products from?
Sonoff/eWelink products can be purchased directly from their official website or Amazon. See link Where to buy
I want to try this driver out before buying it?
All Chowmain drivers for Control4 come with a 90 day trial.
How do I find out more information about the driver?
Please see the links below for more information about the driver.
-
The Big Ass Fans driver for Control4 is the best way to operate the fan as it provides bi-directional control and feedback.
This means you can utilise the original remote, wall controller, etc to operate the fan (and light) and both Control4 and the Big Ass Fans app will always stay in sync.
Driver here.
https://chowmain.software/drivers/control4-big-ass-fans-haiku
-
Overview
Chowmain releases RYSE smart shades driver for Control4.
RYSE develops innovative window covering solutions that blend intelligence with simplicity. RYSE SmartShade is an affordable and easy way to motorize your window shades. Using beautiful design and innovative software, SmartShades is a smart device that lets you easily control and schedule when your shades open and close, making your home more comfortable and secure. You’ll never have to touch your window shades again.
RYSE SmartShades is an upgrade for the blinds and shades you already own and love. Simply attach it to your blind’s chain or cord loop to transform them into smart blinds. Installation couldn’t be simpler and it only takes a few minutes.
RYSE SmartShades works with any window covering that uses a looped beaded chain or continuous cord loop. From roller shades to vertical blinds, regardless of brand or size.
Driver Features
- Up / Down / Position control of blinds
- One-Click AutoSetup of blinds
- Easily display Gateway information including: Firmware, Hardware Revision
- Easily Display and Variables for each Blind including: Hardware Revision, Firmware, Battery Level, Serial, Position, Power Type, Blind Position
- Easily Notify of Low battery level of blinds.
FAQ
What cool things can I do with this driver?
- Open, Close and Set Position of Blinds using Control4
- Schedule blinds to open and close automatically using programming
- Get notifications via 4Sight when battery is low
Is Internet Required to use this driver?
This driver uses local LAN for control. Internet is not required.
What Hardware is Required?
You must have a RYSE SmartBridge to use this driver and stable LAN connection.
Auto-Setup is not operating correctly
Ensure you are running OS 3.3.2 or later.
Where can i find out more about RYSE?
You can find out more about RYSE products via the RYSE website: https://www.helloryse.com
How do we know when the battery level is low?
The driver pulls in the battery level information as a variable. For simple programming and display we recommend utilising the Chowmain Battery Indicator driver.
I want to try this driver out before buying it?
All Chowmain drivers for Control4 come with a 90 day trial.
How do I find out more information about the driver?
Please see the links below for more information about the driver.
Chowmain - Magnetar Bluray Player Driver
in Third Party Software
Posted
Overview
Magnetar Blu-ray players are high-performance media devices that deliver exceptional audiovisual experiences. Utilizing advanced magnetar technology, these players boast superior playback quality and enhanced functionality. With support for various disc formats, including Blu-ray, DVD, and CD, they offer a versatile entertainment solution.
Magnetar players incorporate cutting-edge features such as 4K Ultra HD upscaling, HDR (High Dynamic Range) support, and Dolby Atmos compatibility, delivering stunning visuals and immersive audio. Their sleek designs and user-friendly interfaces make navigation effortless, while integrated ethernet and streaming capabilities enable access to online content.
Magnetar Blu-ray players are the go-to choice for cinephiles and home theater enthusiasts seeking unparalleled performance and versatility in their entertainment setups.
Driver Features
FAQ
What models does this driver support
Note that we only support the UDP800 for IP control as the UDP900 does not have wake-on-lan functionality.
Why is this product so exciting?
The Magnetar Blu-ray players are high end Blu-ray players that take audio and video quality seriously. The UDP900 for example features a Sabre ES9038PRO DAC. This DAC outputs stereo sound via twin balanced XLR or unbalanced RCA outputs. It also outputs surround sound via a 7.1 RCA array. It can also output audio digitally via HDMI, optical or coax.
Does this driver support two-way controls
At present this driver is a one-way driver only due to limitations in the Magnetar API. We have asked Magnetar to upgrade their API to support two-way controls. When this does happen we will update our driver to include this functionality.
I want to try this driver out before buying it?
All Chowmain drivers for Control4 come with a 90 day trial.
How do I find out more information about the driver?
Please see the links below for more information about the driver.
Driver Link