shupp872

@ekohn00 just FYI, there is an official MAX driver now from Control4. installed and it is working perfectly.

ah, interesting. I did confirm that the iOS app seems to always show the correct state. I will try the 'changing rooms and coming back' to see if that corrects the state. Thanks posting the info.

3.4.0.0681769 323.41.0.13 - Control4 Software

Sorry if this is a dumb question, i tried searching... I have a weird situation where one of my T3 screens has a shortcut on it for a particular light. very frequently it is as if the shortcut isn't being updated to the current status of the light it is set to control. As an example, I will use the shortcut to the light on. at some point in the future, say 30 minutes, i will try to use the shortcut to turn the same light off. However it won't do anything. I need to go into the actual lighting submenu on the screen, and turn the light off from there. Once i do that, the shortcut will update and reflect the current status. Is this a known bug, or is there something setup incorrectly? I have deleted the shortcut and remade it several times as well, trying to solve the problem. I don't know if this situation occurs on other T3s, or my phone / ipad, i always forget to check when it is happening.

@ekohn00 Did this work for you on your Shield? I have tried, but unfortunately, it doesn't appear to work for me. It doesn't launch the app, and i can't control the shield until i select another mini app. I looked at the driver xml and i didn't see anything that stuck out at me as incorrect.

Do you happen to have any white rockers? I am looking for one as a replacement

Are the pool features setup correctly in the Jandy driver? There are check marks for "Has heater", "Has Spa", etc. I have a jandy system as well, but i have a spa, so my two temps work correctly. Does your i-aqualink app have two temps setup? I am not sure why the app would show two temps if you only have 1 heater and no spa? Maybe the C4 system is just reading that information from your i-aqualink account, and that is where the real correction needs to happen?

Thanks everybody, i will look into the options.

Is anybody aware of a front door lock / deadbolt lock that has a fingerprint reader that integrates with Control4?

I think you would need to use the Kodi software on the Shield, and the Full Kodi driver from Chowmain to accomplish the direct media file selection / play through the C4 interface.

The update notes say "Use your Control4 remote or app to navigate your SHIELD and even directly launch installed apps. Contact your certified Control4 installer to add your SHIELD today." Very interesting indeed!

I am, I use the back button on the Neeo, or the cancel button on the Sr-260.

HC800 sold

Same, I have multiple TiVo (Roamios, Mini, Mini 4k, Bolts), and have never seen this behavior. I have also been a part of numerous TiVo beta projects over the years. Is your network config somehow changing to block multicast? when your C4 remote stops working, have you tried with the your mobile app to see if you can use the network remote control functionality?

Good condition, removed from a working system after upgrading with the help of @chopedogg88. Just sitting around now, comes with the power adapter. $120 shipped in the US. I also have an older HC300, and Control4 Thermostat (older). Open to any offers.

Does Tp-Link make an in wall dimmer outlet, or are they only switched outlets? I haven't seen a dimmer yet, but I may have just missed it.

Ooooh, that IS nice. Thanks for that!

Is there any way this can be done without the Unifi Driver? I have the QR code already for joining my guest network, is there a way to hit a button / experience button the T3 to display a pre selected image?

just as another point of reference, I have my garage with MyQ working just fine, i believe it is with the Cinegration driver. I have had no problems with it since I have had it. However i undersand your point that since it is a driver based on an unofficial API, it could potentially break at any time. Also, my Jandy iqualink 2.0 is working perfectly as well. (I haven't noticed any issues with the heater status, but maybe I am not paying close enough attention to its status). Both of these are connected (wirelessly) through my Unifi network, and have been rock solid.

Thanks for the explanation, RyanE. Does the T3 component update process use the same methodology?

okay, nevermind. Apparently I did a bang up job of whitelisting...or something. I ended up disabling my dns based filtering, rebooted the controller, and the features have returned. Sorry to take up people's time with this. Thanks for the help!

yeah, if I go to settings, then about, i get a list my remote version, recovery version, bootloader version, etc. there is no option for feature flags there. If i back up, and hit the 4 in the upper left, i get the What's new, display brightness, beep when docked, about, and regulatory. I have been through all those options and i see nothing for feature flags. unless you are referring to "what's new". In which case, all it shows is the ability to change rooms by tapping the room name on the top of the screen.

Thanks, where should I be looking for this setting? On the Neeo itself?

i am assuming, if i can browse to split.io on a computer, via the same wireless network that the Neeo is on, i should be good, no? I specifically added split.io to my whitelist as well.

Thanks for the suggestion, unfortunately no change following those steps. Still stuck without the lighting filters.