Bullseye Posted October 3, 2014 Share Posted October 3, 2014 After the 2.6 upgrade, for the second time, the sr250s gets very slow response up to the point it needs a reboot to the 800 to get back to normal. Does anybody else have the same program? What could cause this??Thanks!! Link to comment Share on other sites More sharing options...
msgreenf Posted October 3, 2014 Share Posted October 3, 2014 Sounds like a zigbee problem Sent from my XT1060 using Tapatalk Link to comment Share on other sites More sharing options...
SMHarman Posted October 3, 2014 Share Posted October 3, 2014 Thus did the zigbee channel change as part of the upgrade? Link to comment Share on other sites More sharing options...
Snaffle8 Posted October 3, 2014 Share Posted October 3, 2014 Make sure your zigbee and wifi aren't overlapping. Link to comment Share on other sites More sharing options...
prabeau Posted October 3, 2014 Share Posted October 3, 2014 And how does one do that other then trial and error Link to comment Share on other sites More sharing options...
msgreenf Posted October 3, 2014 Share Posted October 3, 2014 And how does one do that other then trial and errorZigBee channel 25 doesn't overlap with wifi Sent from my XT1060 using Tapatalk Link to comment Share on other sites More sharing options...
prabeau Posted October 3, 2014 Share Posted October 3, 2014 The ZigBee channel can only be changed by dealer i.e.:Composer Pro is that correct ? Thanks Link to comment Share on other sites More sharing options...
msgreenf Posted October 3, 2014 Share Posted October 3, 2014 The ZigBee channel can only be changed by dealer i.e.:Composer Pro is that correct ?ThanksyesSent from my XT1060 using Tapatalk Link to comment Share on other sites More sharing options...
Bullseye Posted October 4, 2014 Author Share Posted October 4, 2014 I think the mobile devices (iOs) were also sluggish. Have to look at it for a few days.Thanks!! Link to comment Share on other sites More sharing options...
TEKSTEIN Posted October 5, 2014 Share Posted October 5, 2014 I've have also noticed the same problem after updating to 2.6. I have also noticed that the lights, tv, etc will be on but will not show that its on the iPad/iPhones. Link to comment Share on other sites More sharing options...
drmark12pa Posted October 5, 2014 Share Posted October 5, 2014 I'm still on 2.5.3 but today have noticed horrible lag on controlling Directv... I rebooted HC800 and still little improvement.... not sure why the crappy response time. Mobile device control took forever to log in today as well.... Link to comment Share on other sites More sharing options...
PaDadof2 Posted October 15, 2014 Share Posted October 15, 2014 My 2800es ip driver isn't playing well with 2.6. It's only the volume control that sluggish though. When I change inputs, its immediate, when I dim lights, its immediate, but volume on 2800 is not. I have an HC800 as the controller and I'm only using the 2800 as a receiver. Any thoughts? Link to comment Share on other sites More sharing options...
Tokead Posted October 15, 2014 Share Posted October 15, 2014 I'm finding volume control is a little slow on my iOS devices. I'm running 2.6. Not sure if it's C4 or wifi issues. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Matt Lowe Posted October 15, 2014 Share Posted October 15, 2014 My 2800es ip driver isn't playing well with 2.6. It's only the volume control that sluggish though. When I change inputs, its immediate, when I dim lights, its immediate, but volume on 2800 is not. I have an HC800 as the controller and I'm only using the 2800 as a receiver. Any thoughts?I am also having similar issues of it not reporting correct volume levels its slow to update but it eventually does. this may be due to the limited hardware in the sony. I do say my theater has been much more reliable with the slave hc300 than the 2800 ever was Link to comment Share on other sites More sharing options...
Matt Lowe Posted October 15, 2014 Share Posted October 15, 2014 in terms of the question at hand a wifi analyzer will help narrow down interference issues. easy to do is power off and restart any of the c4 equipiment Link to comment Share on other sites More sharing options...
AK1 Posted October 16, 2014 Share Posted October 16, 2014 http://inssider.com/downloads/ Simple - no special hardware needed Link to comment Share on other sites More sharing options...
Cyknight Posted October 16, 2014 Share Posted October 16, 2014 inSSIDer is no longer free unfortunately - but it is a great simple tool for some basic WFi checking. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.